lkml.org 
[lkml]   [2021]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] hwmon: (pmbus/tps53679) Add support for TPS53676
On Fri, Mar 19, 2021 at 12:04 AM Guenter Roeck <linux@roeck-us.net> wrote:
>
> On 3/18/21 2:24 PM, Erik Rosen wrote:
> > Add support for TI TPS53676 controller to the tps53679 pmbus driver
> >
> > The driver uses the USER_DATA_03 register to figure out how many phases are
> > enabled and to which channel they are assigned, and sets the number of pages
>
> checkpatch complains about the line length here. Picky, but just move pages
> to the next line.

Sorry, forgot to run checkpath after changing the comment.

>
> > and phases accordingly.
> >
> > Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
> > ---
> > Documentation/hwmon/tps53679.rst | 13 +++++++--
> > drivers/hwmon/pmbus/Kconfig | 4 +--
> > drivers/hwmon/pmbus/tps53679.c | 49 +++++++++++++++++++++++++++++++-
> > 3 files changed, 61 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/hwmon/tps53679.rst b/Documentation/hwmon/tps53679.rst
> > index c7c589e49789..3b9561648c24 100644
> > --- a/Documentation/hwmon/tps53679.rst
> > +++ b/Documentation/hwmon/tps53679.rst
> > @@ -19,6 +19,14 @@ Supported chips:
> >
> > Datasheet: https://www.ti.com/lit/gpn/TPS53667
> >
> > + * Texas Instruments TPS53676
> > +
> > + Prefix: 'tps53676'
> > +
> > + Addresses scanned: -
> > +
> > + Datasheet: https://www.ti.com/lit/gpn/TPS53676
> > +
> > * Texas Instruments TPS53679
> >
> > Prefix: 'tps53679'
> > @@ -136,7 +144,7 @@ power1_input Measured input power.
> > power[N]_label "pout[1-2]".
> >
> > - TPS53647, TPS53667: N=2
> > - - TPS53679, TPS53681, TPS53588: N=2,3
> > + - TPS53676, TPS53679, TPS53681, TPS53588: N=2,3
> >
> > power[N]_input Measured output power.
> >
> > @@ -156,10 +164,11 @@ curr[N]_label "iout[1-2]" or "iout1.[0-5]".
> >
> > The first digit is the output channel, the second
> > digit is the phase within the channel. Per-phase
> > - telemetry supported on TPS53681 only.
> > + telemetry supported on TPS53676 and TPS53681 only.
> >
> > - TPS53647, TPS53667: N=2
> > - TPS53679, TPS53588: N=2,3
> > + - TPS53676: N=2-8
> > - TPS53681: N=2-9
> >
> > curr[N]_input Measured output current.
> > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> > index 32d2fc850621..35956a9227d8 100644
> > --- a/drivers/hwmon/pmbus/Kconfig
> > +++ b/drivers/hwmon/pmbus/Kconfig
> > @@ -257,10 +257,10 @@ config SENSORS_TPS40422
> > be called tps40422.
> >
> > config SENSORS_TPS53679
> > - tristate "TI TPS53647, TPS53667, TPS53679, TPS53681, TPS53688"
> > + tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688"
> > help
> > If you say yes here you get hardware monitoring support for TI
> > - TPS53647, TPS53667, TPS53679, TPS53681, and TPS53688.
> > + TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688.
> >
> > This driver can also be built as a module. If so, the module will
> > be called tps53679.
> > diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c
> > index ba838fa311c3..d8e5f71ff162 100644
> > --- a/drivers/hwmon/pmbus/tps53679.c
> > +++ b/drivers/hwmon/pmbus/tps53679.c
> > @@ -16,11 +16,14 @@
> > #include "pmbus.h"
> >
> > enum chips {
> > - tps53647, tps53667, tps53679, tps53681, tps53688
> > + tps53647, tps53667, tps53676, tps53679, tps53681, tps53688
> > };
> >
> > #define TPS53647_PAGE_NUM 1
> >
> > +#define TPS53676_USER_DATA_03 0xb3
> > +#define TPS53676_MAX_PHASES 7
> > +
> > #define TPS53679_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */
> > #define TPS53679_PROT_VR12_5_10MV 0x02 /* VR12.5 mode, 10-mV DAC */
> > #define TPS53679_PROT_VR13_10MV 0x04 /* VR13.0 mode, 10-mV DAC */
> > @@ -143,6 +146,43 @@ static int tps53681_identify(struct i2c_client *client,
> > TPS53681_DEVICE_ID);
> > }
> >
> > +static int tps53676_identify(struct i2c_client *client,
> > + struct pmbus_driver_info *info)
> > +{
> > + u8 buf[I2C_SMBUS_BLOCK_MAX];
> > + int phases_a = 0, phases_b = 0;
> > + int i, ret;
> > +
> > + ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
> > + if (ret < 0)
> > + return ret;
> > + if (strncmp("TI\x53\x67\x60", buf, 5)) {
>
> Someone should have a serious talk with the chip designer.

It's like; "Gee, I have this great idea how to save 2 bytes by using
this amazing
new hybrid ascii/binary format I just invented"

>
> > + dev_err(&client->dev, "Unexpected device ID: %s\n", buf);
> > + return -ENODEV;
> > + }
> > +
> > + ret = i2c_smbus_read_block_data(client, TPS53676_USER_DATA_03, buf);
> > + if (ret < 0)
> > + return ret;
>
> You'll probably want to add a check to ensure that ret >= TPS53676_MAX_PHASES * 2 + 1
> or maybe == 24.

Yes; and if it's not equal to 24 something probably went wrong, so
I'll check för that.

>
> > + for (i = 0; i < 2 * TPS53676_MAX_PHASES; i += 2) {
> > + if (buf[i + 1] & 0x80) {
> > + if (buf[i] & 0x08)
> > + phases_b++;
> > + else
> > + phases_a++;
> > + }
> > + }
> > +
> > + info->format[PSC_VOLTAGE_OUT] = linear;
> > + info->pages = 1;
> > + info->phases[0] = phases_a;
> > + if (phases_b > 0) {
> > + info->pages = 2;
> > + info->phases[1] = phases_b;
> > + }
> > + return 0;
> > +}
> > +
> > static int tps53681_read_word_data(struct i2c_client *client, int page,
> > int phase, int reg)
> > {
> > @@ -183,6 +223,7 @@ static struct pmbus_driver_info tps53679_info = {
> > .pfunc[3] = PMBUS_HAVE_IOUT,
> > .pfunc[4] = PMBUS_HAVE_IOUT,
> > .pfunc[5] = PMBUS_HAVE_IOUT,
> > + .pfunc[6] = PMBUS_HAVE_IOUT,
> > };
> >
> > static int tps53679_probe(struct i2c_client *client)
> > @@ -206,6 +247,9 @@ static int tps53679_probe(struct i2c_client *client)
> > info->pages = TPS53647_PAGE_NUM;
> > info->identify = tps53679_identify;
> > break;
> > + case tps53676:
> > + info->identify = tps53676_identify;
> > + break;
> > case tps53679:
> > case tps53688:
> > info->pages = TPS53679_PAGE_NUM;
> > @@ -227,9 +271,11 @@ static int tps53679_probe(struct i2c_client *client)
> > static const struct i2c_device_id tps53679_id[] = {
> > {"tps53647", tps53647},
> > {"tps53667", tps53667},
> > + {"tps53676", tps53676},
> > {"tps53679", tps53679},
> > {"tps53681", tps53681},
> > {"tps53688", tps53688},
> > + {"bmr474", tps53676},
>
> Please move to the top for alphabetic order.

Ok, was a bit uncertain about that...

>
> > {}
> > };
> >
> > @@ -238,6 +284,7 @@ MODULE_DEVICE_TABLE(i2c, tps53679_id);
> > static const struct of_device_id __maybe_unused tps53679_of_match[] = {
> > {.compatible = "ti,tps53647", .data = (void *)tps53647},
> > {.compatible = "ti,tps53667", .data = (void *)tps53667},
> > + {.compatible = "ti,tps53676", .data = (void *)tps53676},
> > {.compatible = "ti,tps53679", .data = (void *)tps53679},
> > {.compatible = "ti,tps53681", .data = (void *)tps53681},
> > {.compatible = "ti,tps53688", .data = (void *)tps53688},
> >
>

\
 
 \ /
  Last update: 2021-03-19 11:39    [W:0.049 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site