lkml.org 
[lkml]   [2021]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 05/11] i2c: imx-lpi2c: add debug message when i2c peripheral clk doesn't work
Date
> From: Clark Wang <xiaoning.wang@nxp.com>
> Sent: Wednesday, March 17, 2021 2:54 PM
>
> add debug message when i2c peripheral clk rate is 0, then directly return
> -EINVAL.
>
> Signed-off-by: Gao Pan <pandy.gao@nxp.com>
> Reviewed-by: Andy Duan <fugang.duan@nxp.com>

Drop old review when patch is changed

> ---
> drivers/i2c/busses/i2c-imx-lpi2c.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c
> b/drivers/i2c/busses/i2c-imx-lpi2c.c
> index e718bb6b2387..8f9dd3dd2951 100644
> --- a/drivers/i2c/busses/i2c-imx-lpi2c.c
> +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
> @@ -209,7 +209,12 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct
> *lpi2c_imx)
>
> lpi2c_imx_set_mode(lpi2c_imx);
>
> - clk_rate = clk_get_rate(lpi2c_imx->clk);

I guess the kernel can't compile right before this patch because lpi2c_imx->clk was
Removed In former patch
You need double check not break bisect

> + clk_rate = clk_get_rate(lpi2c_imx->clk_per);
> + if (!clk_rate) {
> + dev_dbg(&lpi2c_imx->adapter.dev, "clk_per rate is 0\n");

s/dev_dbg/dev_err

> + return -EINVAL;
> + }
> +
> if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
> filt = 0;
> else
> --
> 2.25.1

\
 
 \ /
  Last update: 2021-03-19 05:58    [W:0.178 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site