lkml.org 
[lkml]   [2021]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8] i2c: virtio: add a virtio i2c frontend driver
From
Date

On 2021/3/19 13:40, Viresh Kumar wrote:
> On 19-03-21, 13:31, Jie Deng wrote:
>> On 2021/3/19 11:54, Viresh Kumar wrote:
>>> On 18-03-21, 15:52, Arnd Bergmann wrote:
>>>> Allowing multiple virtio-i2c controllers in one system, and multiple i2c
>>>> devices attached to each controller is clearly something that has to work.
>>> Good.
>>>
>>>> I don't actually see a limitation though. Viresh, what is the problem
>>>> you see for having multiple controllers?
>>> I thought this would be a problem in that case as we are using the global
>>> virtio_adapter here.
>>>
>>> + vi->adap = &virtio_adapter;
>>> + i2c_set_adapdata(vi->adap, vi);
>>>
>>> Multiple calls to probe() will end up updating the same pointer inside adap.
>>>
>>> + vi->adap->dev.parent = &vdev->dev;
>>>
>>> Same here, overwrite.
>>>
>>> + /* Setup ACPI node for controlled devices which will be probed through ACPI */
>>> + ACPI_COMPANION_SET(&vi->adap->dev, ACPI_COMPANION(pdev));
>>> + vi->adap->timeout = HZ / 10;
>>>
>>> These may be fine, but still not ideal I believe.
>>>
>>> + ret = i2c_add_adapter(vi->adap);
>>> i
>>> This should be a problem as well, we must be adding this to some sort of list,
>>> doing some RPM stuff, etc ?
>>>
>>> Jie, the solution is to allocate memory for adap at runtime in probe and remove
>>> the virtio_adapter structure completely.
>>
>> If you want to support that. Then I think we don't need to change the
>> following at all.
>>
>>> +    .algo = &virtio_algorithm,
>>> +
>>> +        return ret;
>>> +
>>> +    vi->adap = virtio_adapter;
>> This is strange, why are you allocating memory for adapter twice ?
>> Once for virtio_adapter and once for vi->adap ? Either fill the fields
>> directly for v->adap here and remove virtio_adapter or make vi->adap a
>> pointer.
> Yes, your previous version was partly okay but you don't need the
> virtio_algorithm structure to be allocated. There are only 4 fields you are
> updating here, just fill them directly in vi->adap.
>
> (FWIW, I also suggested the same when I said
> "Either fill the fields directly for v->adap here and remove virtio_adapter".
> )
>
> See how drivers/i2c/busses/i2c-versatile.c and most of the other drivers have
> done it.
I also see example drivers/i2c/busses/i2c-xiic.c. Some people might
think this way is more clearer than

updating each member in probe. Basically, I think it's just a matter of
personal preference which doesn't

solve any problems.


\
 
 \ /
  Last update: 2021-03-19 07:31    [W:0.303 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site