lkml.org 
[lkml]   [2021]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/1] sched/topology: NUMA distance deduplication
From
Date
Hello!

On 3/18/21 12:26 AM, John Paul Adrian Glaubitz wrote:
>> b) do anything?
>
> It fixes the problem for me.

Here are the kernel messages with your patch applied:

[ 0.000000] Linux version 5.12.0-rc3+ (glaubitz@epyc) (ia64-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34) #207 SMP Thu Mar 18 09:50:43 CET 2021
[ 0.000000] efi: EFI v2.00 by HP
[ 0.000000] efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fde4000 ESI=0x3ee7b000 SMBIOS=0x3ee7c000 HCDP=0x3fde2000
[ 0.000000] PCDP: v3 at 0x3fde2000
[ 0.000000] earlycon: uart8250 at MMIO 0x0000000088033000 (options '115200n8')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000003FDE4000 000028 (v02 HP )
[ 0.000000] ACPI: XSDT 0x000000003FDE402C 0000A4 (v01 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: FACP 0x000000003FDF6A08 0000F4 (v03 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: DSDT 0x000000003FDE41C8 00E566 (v01 HP rx2660 00000007 INTL 20050309)
[ 0.000000] ACPI: FACS 0x000000003FDF6B00 000040
[ 0.000000] ACPI: SPCR 0x000000003FDF6B40 000050 (v01 HP 00000000 HP 00000000)
[ 0.000000] ACPI: DBGP 0x000000003FDF6B90 000034 (v01 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: APIC 0x000000003FDF6FB0 0000C8 (v01 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: SPMI 0x000000003FDF6BC8 000050 (v04 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: CPEP 0x000000003FDF6E80 000034 (v01 HP rx2660 00000000 HP 00000000)
[ 0.000000] ACPI: SSDT 0x000000003FDF2738 0004B3 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF2BF8 000456 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF3058 000EB8 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF3F18 000EB8 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF4DD8 000866 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF5648 000EB8 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF6508 000138 (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF6648 00013C (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF6788 00013C (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: SSDT 0x000000003FDF68C8 00013C (v01 HP rx2660 00000006 INTL 20050309)
[ 0.000000] ACPI: Local APIC address (____ptrval____)
[ 0.000000] 4 CPUs available, 4 CPUs total
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] Initial ramdisk at: 0xe00000002d52b000 (24744716 bytes)
[ 0.000000] SAL 3.20: HP version 4.4
[ 0.000000] SAL Platform features:
[ 0.000000] None
[ 0.000000] SAL: AP wakeup using external interrupt vector 0xff
[ 0.000000] MCA related initialization done
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000001007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000001000000-0x000000003e67ffff]
[ 0.000000] node 0: [mem 0x000000003eaec000-0x000000003ee77fff]
[ 0.000000] node 0: [mem 0x000000003fc00000-0x000000003fd77fff]
[ 0.000000] node 0: [mem 0x000000003fddc000-0x000000003fddffff]
[ 0.000000] node 0: [mem 0x0000010040000000-0x000001007f1fbfff]
[ 0.000000] node 0: [mem 0x000001007f200000-0x000001007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000001000000-0x000001007fffffff]
[ 0.000000] On node 0 totalpages: 128737
[ 0.000000] DMA32 zone: 247 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 63202 pages, LIFO batch:15
[ 0.000000] DMA32 zone: 2334 pages in unavailable ranges
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 65535 pages, LIFO batch:15
[ 0.000000] Normal zone: 1 pages in unavailable ranges
[ 0.000000] pcpu-alloc: s33176 r8192 d220776 u262144 alloc=16*16384
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128234
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.12.0-rc3+ root=UUID=0c24a3da-2673-4901-b95b-d5adf2643b67 ro
[ 0.000000] Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x000000003a680000-0x000000003e680000] (64MB)
[ 0.000000] Memory: 1924752K/2059792K available (17153K kernel code, 1420K rwdata, 1992K rodata, 992K init, 702K bss, 135040K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x50/0x10a0 with crng_init=0
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 1024
[ 0.000000] ACPI: Local APIC address (____ptrval____)
[ 0.000000] GSI 25 (level, low) -> CPU 0 (0x0000) vector 49
[ 0.000000] CPU 0: base freq=266.110MHz, ITC ratio=6/4, ITC freq=399.165MHz
[ 0.000000] +/-150ppm
[ 0.000000] clocksource: itc: mask: 0xffffffffffffffff max_cycles: 0x5c0f4c551d, max_idle_ns: 440795215289 ns
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] ACPI: Core revision 20210105
[ 0.004000] Calibrating delay loop... 3182.59 BogoMIPS (lpj=6365184)
[ 0.020000] pid_max: default: 32768 minimum: 301
[ 0.020000] LSM: Security Framework initializing
[ 0.020000] Yama: becoming mindful.
[ 0.020000] AppArmor: AppArmor initialized
[ 0.020000] TOMOYO Linux initialized
[ 0.020000] Mount-cache hash table entries: 4096 (order: 1, 32768 bytes, linear)
[ 0.020000] Mountpoint-cache hash table entries: 4096 (order: 1, 32768 bytes, linear)
[ 0.024000] Boot processor id 0x0/0x0
[ 0.024000] rcu: Hierarchical SRCU implementation.
[ 0.024000] smp: Bringing up secondary CPUs ...
[ 0.004000] Fixed BSP b0 value from CPU 1
[ 0.004000] CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 39 cycles)
[ 0.004000] CPU 1: base freq=266.110MHz, ITC ratio=6/4, ITC freq=399.165MHz
[ 0.004000] +/-150ppm
[ 0.004000] CPU 2: synchronized ITC with CPU 0 (last diff -5 cycles, maxerr 167 cycles)
[ 0.004000] CPU 2: base freq=266.110MHz, ITC ratio=6/4, ITC freq=399.165MHz
[ 0.004000] +/-150ppm
[ 0.004000] CPU 3: synchronized ITC with CPU 0 (last diff -5 cycles, maxerr 167 cycles)
[ 0.004000] CPU 3: base freq=266.110MHz, ITC ratio=6/4, ITC freq=399.165MHz
[ 0.004000] +/-150ppm
[ 0.028000] smp: Brought up 1 node, 4 CPUs
[ 0.032000] Total of 4 processors activated (12730.36 BogoMIPS).
[ 0.032000] devtmpfs: initialized
[ 0.032000] SMBIOS 2.4 present.
[ 0.032000] DMI: hp server rx2660 , BIOS 04.04 07/15/2008
[ 0.036000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.036000] futex hash table entries: 1024 (order: 3, 131072 bytes, linear)
[ 0.036000] NET: Registered protocol family 16
[ 0.036000] audit: initializing netlink subsys (disabled)
[ 0.040000] audit: type=2000 audit(1616057988.040:1): state=initialized audit_enabled=0 res=1
[ 0.040000] thermal_sys: Registered thermal governor 'fair_share'
[ 0.040000] thermal_sys: Registered thermal governor 'step_wise'
[ 0.040000] ACPI: bus type PCI registered
[ 0.044000] HugeTLB registered 256 MiB page size, pre-allocated 0 pages
[ 0.276000] random: fast init done
[ 1.500000] ACPI: Added _OSI(Module Device)
[ 1.500000] ACPI: Added _OSI(Processor Device)
[ 1.500000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.500000] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.500000] ACPI: Added _OSI(Linux-Dell-Video)
[ 1.504000] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 1.504000] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 1.508000] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 1.564000] ACPI: Interpreter enabled
[ 1.564000] ACPI: (supports S0 S5)
[ 1.564000] ACPI: Using IOSAPIC for interrupt routing
[ 1.592000] ACPI: Enabled 2 GPEs in block 10 to 1F
[ 1.908000] ACPI: PCI Root Bridge [L000] (domain 0000 [bus 00])
[ 1.908000] acpi HWP0002:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 1.940000] PCI host bridge to bus 0000:00
[ 1.940000] pci_bus 0000:00: root bus resource [io 0x1000000-0x100ffff window] (bus address [0x0000-0xffff])
[ 1.940000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[ 1.940000] pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window]
[ 1.944000] pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window]
[ 1.944000] pci_bus 0000:00: root bus resource [bus 00]
[ 1.948000] pci 0000:00:01.0: [103c:1303] type 00 class 0xff0000
[ 1.952000] pci 0000:00:01.1: [103c:1302] type 00 class 0x078000
[ 1.952000] pci 0000:00:01.1: reg 0x14: [mem 0x88034000-0x88034fff 64bit]
[ 1.952000] pci 0000:00:01.1: reg 0x1c: [mem 0x80080000000-0x8008001ffff 64bit pref]
[ 1.956000] pci 0000:00:01.2: [103c:1048] type 00 class 0x070002
[ 1.956000] pci 0000:00:01.2: reg 0x14: [mem 0x88033000-0x88033fff 64bit]
[ 1.960000] pci 0000:00:02.0: [1033:0035] type 00 class 0x0c0310
[ 1.960000] pci 0000:00:02.0: reg 0x10: [mem 0x88032000-0x88032fff]
[ 1.964000] pci 0000:00:02.0: supports D1 D2
[ 1.964000] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
[ 1.964000] pci 0000:00:02.1: [1033:0035] type 00 class 0x0c0310
[ 1.964000] pci 0000:00:02.1: reg 0x10: [mem 0x88031000-0x88031fff]
[ 1.968000] pci 0000:00:02.1: supports D1 D2
[ 1.968000] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot
[ 1.972000] pci 0000:00:02.2: [1033:00e0] type 00 class 0x0c0320
[ 1.972000] pci 0000:00:02.2: reg 0x10: [mem 0x88030000-0x880300ff]
[ 1.972000] pci 0000:00:02.2: supports D1 D2
[ 1.972000] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot
[ 1.976000] pci 0000:00:03.0: [1002:515e] type 00 class 0x030000
[ 1.976000] pci 0000:00:03.0: reg 0x10: [mem 0x80000000-0x87ffffff pref]
[ 1.976000] pci 0000:00:03.0: reg 0x14: [io 0x1001000-0x10010ff]
[ 1.976000] pci 0000:00:03.0: reg 0x18: [mem 0x88020000-0x8802ffff]
[ 1.976000] pci 0000:00:03.0: reg 0x30: [mem 0x88000000-0x8801ffff pref]
[ 1.980000] pci 0000:00:03.0: supports D1 D2
[ 2.008000] ACPI: PCI Root Bridge [L002] (domain 0000 [bus 01])
[ 2.008000] acpi HWP0002:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 2.032000] PCI host bridge to bus 0000:01
[ 2.032000] pci_bus 0000:01: root bus resource [io 0x2000000-0x200ffff window] (bus address [0x0000-0xffff])
[ 2.032000] pci_bus 0000:01: root bus resource [mem 0xa0000000-0xafffffff window]
[ 2.032000] pci_bus 0000:01: root bus resource [mem 0x80204000000-0x802ffffffff window]
[ 2.036000] pci_bus 0000:01: root bus resource [bus 01]
[ 2.040000] pci 0000:01:01.0: [1000:0054] type 00 class 0x010000
[ 2.040000] pci 0000:01:01.0: reg 0x10: [io 0x2001000-0x20010ff]
[ 2.044000] pci 0000:01:01.0: reg 0x14: [mem 0xa0470000-0xa0473fff 64bit]
[ 2.044000] pci 0000:01:01.0: reg 0x1c: [mem 0xa0460000-0xa046ffff 64bit]
[ 2.044000] pci 0000:01:01.0: reg 0x30: [mem 0xa0000000-0xa03fffff pref]
[ 2.044000] pci 0000:01:01.0: supports D1 D2
[ 2.048000] pci 0000:01:02.0: [14e4:1648] type 00 class 0x020000
[ 2.048000] pci 0000:01:02.0: reg 0x10: [mem 0xa0450000-0xa045ffff 64bit]
[ 2.052000] pci 0000:01:02.0: reg 0x30: [mem 0xa0420000-0xa043ffff pref]
[ 2.052000] pci 0000:01:02.0: PME# supported from D3hot D3cold
[ 2.052000] pci 0000:01:02.1: [14e4:1648] type 00 class 0x020000
[ 2.056000] pci 0000:01:02.1: reg 0x10: [mem 0xa0440000-0xa044ffff 64bit]
[ 2.056000] pci 0000:01:02.1: reg 0x30: [mem 0xa0400000-0xa041ffff pref]
[ 2.060000] pci 0000:01:02.1: PME# supported from D3hot D3cold
[ 2.084000] ACPI: PCI Root Bridge [L003] (domain 0000 [bus 02-03])
[ 2.084000] acpi HPQ0002:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 2.092000] acpi HPQ0002:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 2.116000] PCI host bridge to bus 0000:02
[ 2.116000] pci_bus 0000:02: root bus resource [io 0x3000000-0x300ffff window] (bus address [0x0000-0xffff])
[ 2.116000] pci_bus 0000:02: root bus resource [mem 0xb0000000-0xbfffffff window]
[ 2.116000] pci_bus 0000:02: root bus resource [mem 0x80304000000-0x803ffffffff window]
[ 2.116000] pci_bus 0000:02: root bus resource [bus 02-03]
[ 2.120000] pci 0000:02:00.0: [103c:403b] type 01 class 0x060400
[ 2.128000] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.152000] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 2.152000] pci 0000:02:00.0: bridge window [io 0x3001000-0x300ffff]
[ 2.152000] pci 0000:02:00.0: bridge window [mem 0xb0000000-0xbfffffff]
[ 2.152000] pci 0000:02:00.0: bridge window [mem 0x80380000000-0x803ffffffff 64bit pref]
[ 2.192000] ACPI: PCI Root Bridge [L004] (domain 0000 [bus 04-05])
[ 2.192000] acpi HPQ0002:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 2.200000] acpi HPQ0002:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 2.224000] PCI host bridge to bus 0000:04
[ 2.224000] pci_bus 0000:04: root bus resource [io 0x4000000-0x400ffff window] (bus address [0x0000-0xffff])
[ 2.224000] pci_bus 0000:04: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 2.224000] pci_bus 0000:04: root bus resource [mem 0x80404000000-0x804ffffffff window]
[ 2.224000] pci_bus 0000:04: root bus resource [bus 04-05]
[ 2.228000] pci 0000:04:00.0: [103c:403b] type 01 class 0x060400
[ 2.236000] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 2.264000] pci 0000:05:00.0: [103c:3230] type 00 class 0x010400
[ 2.272000] pci 0000:05:00.0: reg 0x10: [mem 0xc0000000-0xc00fffff 64bit]
[ 2.276000] pci 0000:05:00.0: reg 0x18: [io 0x4001000-0x40010ff]
[ 2.284000] pci 0000:05:00.0: reg 0x1c: [mem 0xc0140000-0xc0140fff 64bit]
[ 2.292000] pci 0000:05:00.0: reg 0x30: [mem 0xc0100000-0xc013ffff pref]
[ 2.312000] pci 0000:05:00.0: supports D1
[ 2.336000] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 2.336000] pci 0000:04:00.0: bridge window [io 0x4001000-0x400ffff]
[ 2.336000] pci 0000:04:00.0: bridge window [mem 0xc0000000-0xdfffffff]
[ 2.336000] pci 0000:04:00.0: bridge window [mem 0x80480000000-0x804ffffffff 64bit pref]
[ 2.376000] ACPI: PCI Root Bridge [L006] (domain 0000 [bus 06])
[ 2.380000] acpi HWP0002:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 2.420000] PCI host bridge to bus 0000:06
[ 2.420000] pci_bus 0000:06: root bus resource [io 0x5000000-0x500ffff window] (bus address [0x0000-0xffff])
[ 2.420000] pci_bus 0000:06: root bus resource [mem 0xe0000000-0xefffffff window]
[ 2.420000] pci_bus 0000:06: root bus resource [mem 0x80604000000-0x806ffffffff window]
[ 2.420000] pci_bus 0000:06: root bus resource [bus 06]
[ 2.468000] ACPI: PCI Root Bridge [L007] (domain 0000 [bus 07-08])
[ 2.468000] acpi HPQ0002:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 2.476000] acpi HPQ0002:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 2.496000] PCI host bridge to bus 0000:07
[ 2.496000] pci_bus 0000:07: root bus resource [io 0x6000000-0x600ffff window] (bus address [0x0000-0xffff])
[ 2.496000] pci_bus 0000:07: root bus resource [mem 0xf0000000-0xfdffffff window]
[ 2.496000] pci_bus 0000:07: root bus resource [mem 0x80704000000-0x807ffffffff window]
[ 2.500000] pci_bus 0000:07: root bus resource [bus 07-08]
[ 2.504000] pci 0000:07:00.0: [103c:403b] type 01 class 0x060400
[ 2.512000] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 2.540000] pci 0000:07:00.0: PCI bridge to [bus 08]
[ 2.540000] pci 0000:07:00.0: bridge window [io 0x6001000-0x600ffff]
[ 2.540000] pci 0000:07:00.0: bridge window [mem 0xf0000000-0xfdffffff]
[ 2.540000] pci 0000:07:00.0: bridge window [mem 0x80780000000-0x807ffffffff 64bit pref]
[ 2.556000] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[ 2.556000] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 2.556000] pci 0000:00:03.0: vgaarb: bridge control possible
[ 2.556000] vgaarb: loaded
[ 2.560000] pps_core: LinuxPPS API ver. 1 registered
[ 2.560000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.560000] PTP clock support registered
[ 2.560000] Registered efivars operations
[ 2.576000] IOC: zx2 2.0 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
[ 2.652000] clocksource: Switched to clocksource itc
[ 2.652000] VFS: Disk quotas dquot_6.6.0
[ 2.652000] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 2.652000] AppArmor: AppArmor Filesystem Enabled
[ 2.652000] pnp: PnP ACPI init
[ 2.655658] GSI 24 (level, low) -> CPU 1 (0x0100) vector 50
[ 2.655658] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.727659] pnp: PnP ACPI: found 1 devices
[ 2.734895] NET: Registered protocol family 2
[ 2.734895] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 16384 bytes, linear)
[ 2.734895] TCP established hash table entries: 16384 (order: 3, 131072 bytes, linear)
[ 2.734895] TCP bind hash table entries: 16384 (order: 4, 262144 bytes, linear)
[ 2.735697] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.739611] UDP hash table entries: 1024 (order: 1, 32768 bytes, linear)
[ 2.739611] UDP-Lite hash table entries: 1024 (order: 1, 32768 bytes, linear)
[ 2.739611] NET: Registered protocol family 1
[ 2.739611] NET: Registered protocol family 44
[ 2.742884] GSI 17 (level, low) -> CPU 2 (0x0200) vector 51
[ 2.743659] GSI 17 (level, low) -> CPU 2 (0x0200) vector 51 unregistered
[ 2.747659] GSI 18 (level, low) -> CPU 3 (0x0300) vector 51
[ 2.751659] GSI 18 (level, low) -> CPU 3 (0x0300) vector 51 unregistered
[ 2.755659] GSI 19 (level, low) -> CPU 0 (0x0000) vector 51
[ 2.759659] GSI 19 (level, low) -> CPU 0 (0x0000) vector 51 unregistered
[ 2.759659] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 2.759659] PCI: CLS 128 bytes, default 128
[ 2.759659] Unpacking initramfs...
[ 3.479659] Freeing initrd memory: 24160kB freed
[ 3.483611] Initialise system trusted keyrings
[ 3.483611] Key type blacklist registered
[ 3.483661] workingset: timestamp_bits=38 max_order=17 bucket_order=0
[ 3.483661] zbud: loaded
[ 3.483661] Key type asymmetric registered
[ 3.483661] Asymmetric key parser 'x509' registered
[ 3.483661] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 3.487613] io scheduler mq-deadline registered
[ 3.491611] GSI 38 (level, low) -> CPU 1 (0x0100) vector 51
[ 3.491706] pcieport 0000:02:00.0: PME: Signaling with IRQ 55
[ 3.495671] pcieport 0000:02:00.0: AER: enabled with IRQ 55
[ 3.499710] GSI 45 (level, low) -> CPU 2 (0x0200) vector 53
[ 3.503697] pcieport 0000:04:00.0: PME: Signaling with IRQ 57
[ 3.507713] pcieport 0000:04:00.0: AER: enabled with IRQ 57
[ 3.511741] GSI 63 (level, low) -> CPU 3 (0x0300) vector 55
[ 3.515691] pcieport 0000:07:00.0: PME: Signaling with IRQ 59
[ 3.519726] pcieport 0000:07:00.0: AER: enabled with IRQ 59
[ 3.523763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.523763] ACPI: button: Power Button [PWRF]
[ 3.523763] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 3.523763] ACPI: button: Sleep Button [SLPF]
[ 3.530380] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.530380] ACPI: thermal: Thermal Zone [THM0] (27 C)
[ 3.530885] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.530885] 00:00: ttyS0 at MMIO 0xff5e2000 (irq = 50, base_baud = 115200) is a 16550A
[ 3.575658] GSI 16 (level, low) -> CPU 0 (0x0000) vector 57
[ 3.582885] 0000:00:01.2: ttyS1 at MMIO 0x88033000 (irq = 60, base_baud = 115200) is a 16550A
[ 3.582885] printk: console [ttyS1] enabled
[ 3.582885] printk: bootconsole [uart8250] disabled
[ 3.582885] Linux agpgart interface v0.103
[ 3.638883] mousedev: PS/2 mouse device common for all mice
[ 3.638883] rtc-efi rtc-efi.0: registered as rtc0
[ 3.638883] rtc-efi rtc-efi.0: setting system clock to 2021-03-18T08:59:52 UTC (1616057992)
[ 3.639610] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.639610] EFI Variables Facility v0.08 2004-May-17
[ 3.639659] NET: Registered protocol family 10
[ 3.650380] Segment Routing with IPv6
[ 3.651659] mip6: Mobile IPv6
[ 3.651659] NET: Registered protocol family 17
[ 3.654375] mpls_gso: MPLS GSO support
[ 3.654375] registered taskstats version 1
[ 3.654375] Loading compiled-in X.509 certificates
[ 3.654375] zswap: loaded using pool lzo/zbud
[ 3.654883] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.655659] Freeing unused kernel memory: 992K
[ 3.655659] This architecture does not have kernel memory protection.
[ 3.655659] Run /init as init process
[ 3.655659] with arguments:
[ 3.655659] /init
[ 3.655659] with environment:
[ 3.655659] HOME=/
[ 3.655659] TERM=linux
[ 3.655659] BOOT_IMAGE=/boot/vmlinuz-5.12.0-rc3+
[ 3.811607] SCSI subsystem initialized
[ 3.843681] GSI 29 (level, low) -> CPU 1 (0x0100) vector 58
[ 3.854878] ACPI: bus type USB registered
[ 3.854878] usbcore: registered new interface driver usbfs
[ 3.855610] usbcore: registered new interface driver hub
[ 3.855610] usbcore: registered new device driver usb
[ 3.855610] HP HPSA Driver (v 3.4.20-200)
[ 3.855610] hpsa 0000:05:00.0: legacy board ID: 0x3234103c
[ 3.856757] hpsa 0000:05:00.0: legacy board ID: 0x3234103c
[ 3.856757] hpsa 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.862879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.863624] Fusion MPT base driver 3.04.20
[ 3.863624] Copyright (c) 1999-2008 LSI Corporation
[ 3.863624] ehci-pci: EHCI PCI platform driver
[ 3.863624] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.874375] GSI 19 (level, low) -> CPU 2 (0x0200) vector 59
[ 3.874375] ehci-pci 0000:00:02.2: EHCI Host Controller
[ 3.874375] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 3.871888] Fusion MPT SAS Host driver 3.04.20
[ 3.874456] ehci-pci 0000:00:02.2: irq 53, io mem 0x88030000
[ 3.878887] hpsa 0000:05:00.0: Logical aborts not supported
[ 3.878887] hpsa 0000:05:00.0: HP SSD Smart Path aborts not supported
[ 3.879662] GSI 27 (level, low) -> CPU 3 (0x0300) vector 64
[ 3.883614] mptbase: ioc0: Initiating bringup
[ 3.890380] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 3.890380] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
[ 3.890380] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.894380] usb usb1: Product: EHCI Host Controller
[ 3.894380] usb usb1: Manufacturer: Linux 5.12.0-rc3+ ehci_hcd
[ 3.894380] usb usb1: SerialNumber: 0000:00:02.2
[ 3.895615] hub 1-0:1.0: USB hub found
[ 3.895615] hub 1-0:1.0: 5 ports detected
[ 3.899072] ohci-pci: OHCI PCI platform driver
[ 3.902879] GSI 17 (level, low) -> CPU 0 (0x0000) vector 65
[ 3.902879] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 3.902879] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.902879] ohci-pci 0000:00:02.0: irq 51, io mem 0x88032000
[ 3.994877] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.12
[ 3.994877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.994877] usb usb2: Product: OHCI PCI host controller
[ 3.995093] usb usb2: Manufacturer: Linux 5.12.0-rc3+ ohci_hcd
[ 3.995093] usb usb2: SerialNumber: 0000:00:02.0
[ 3.995669] scsi host0: hpsa
[ 3.999613] hub 2-0:1.0: USB hub found
[ 3.999613] hub 2-0:1.0: 3 ports detected
[ 3.999613] hpsa can't handle SMP requests
[ 4.002878] GSI 18 (level, low) -> CPU 1 (0x0100) vector 66
[ 4.002878] ohci-pci 0000:00:02.1: OHCI PCI host controller
[ 4.002878] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 4.003520] ohci-pci 0000:00:02.1: irq 52, io mem 0x88031000
[ 4.007616] hpsa 0000:05:00.0: scsi 0:0:0:0: masked Direct-Access HP DG036A8B53 PHYS DRV SSDSmartPathCap- En- Exp=0
[ 4.007616] hpsa 0000:05:00.0: scsi 0:1:0:0: added Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 4.007616] hpsa 0000:05:00.0: scsi 0:3:0:0: added RAID HP P400 controller SSDSmartPathCap- En- Exp=1
[ 4.009107] scsi 0:1:0:0: Direct-Access HP LOGICAL VOLUME 7.22 PQ: 0 ANSI: 5
[ 4.010383] scsi 0:3:0:0: RAID HP P400 7.22 PQ: 0 ANSI: 0
[ 4.019609] sd 0:1:0:0: [sda] 71065440 512-byte logical blocks: (36.4 GB/33.9 GiB)
[ 4.019609] sd 0:1:0:0: [sda] Write Protect is off
[ 4.019609] sd 0:1:0:0: [sda] Mode Sense: 6b 00 00 08
[ 4.019609] sd 0:1:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 4.063610] sda: sda1 sda2 sda3
[ 4.067613] sd 0:1:0:0: [sda] Attached SCSI disk
[ 4.098878] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.12
[ 4.098878] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.098878] usb usb3: Product: OHCI PCI host controller
[ 4.099351] usb usb3: Manufacturer: Linux 5.12.0-rc3+ ohci_hcd
[ 4.099351] usb usb3: SerialNumber: 0000:00:02.1
[ 4.103351] hub 3-0:1.0: USB hub found
[ 4.103351] hub 3-0:1.0: 2 ports detected
[ 4.194383] tg3 0000:01:02.0 eth0: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:09
[ 4.194383] tg3 0000:01:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 4.198381] tg3 0000:01:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.198381] tg3 0000:01:02.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 4.202374] GSI 30 (level, low) -> CPU 2 (0x0200) vector 67
[ 4.559666] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 4.562383] tg3 0000:01:02.1 eth1: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:08
[ 4.562383] tg3 0000:01:02.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 4.566382] tg3 0000:01:02.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.566382] tg3 0000:01:02.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 4.571604] tg3 0000:01:02.1 enp1s2f1: renamed from eth1
[ 4.587610] tg3 0000:01:02.0 enp1s2f0: renamed from eth0
[ 4.719667] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[ 4.791666] usb 2-1: New USB device found, idVendor=03f0, idProduct=1126, bcdDevice= 0.01
[ 4.791666] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=63
[ 4.791666] usb 2-1: Product: Virtual Management Device
[ 4.796567] usb 2-1: Manufacturer: HP
[ 4.796567] usb 2-1: SerialNumber: 0017a499dd1c
[ 4.811605] hid: raw HID events driver (C) Jiri Kosina
[ 4.831610] usbcore: registered new interface driver usbhid
[ 4.831610] usbhid: USB HID core driver
[ 4.831610] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:03F0:1126.0001/input/input2
[ 4.895610] hid-generic 0003:03F0:1126.0001: input,hidraw0: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:00:02.0-1/input0
[ 4.895610] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/0003:03F0:1126.0002/input/input3
[ 4.895610] hid-generic 0003:03F0:1126.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:00:02.0-1/input1
[ 5.134379] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 5.298379] usb 1-2: New USB device found, idVendor=03f0, idProduct=0126, bcdDevice= 0.a1
[ 5.298379] usb 1-2: New USB device strings: Mfr=51, Product=80, SerialNumber=67
[ 5.298379] usb 1-2: Product: INTEGRITY SERVER
[ 5.298379] usb 1-2: Manufacturer: HEWLETT PACKARD
[ 5.298445] usb 1-2: SerialNumber: A60020000001
[ 5.303604] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 5.306883] scsi host1: usb-storage 1-2:1.0
[ 5.306883] usbcore: registered new interface driver usb-storage
[ 5.306883] usbcore: registered new interface driver uas
[ 5.430883] scsi host2: ioc0: LSISAS1068 B0, FwRev=010f0000h, Ports=1, MaxQ=511, IRQ=66
[ 5.831610] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 5.979658] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 6.343609] scsi 1:0:0:0: CD-ROM TEAC DV-W28EAW H.0C PQ: 0 ANSI: 0
[ 6.607663] random: crng init done
[ 7.478882] systemd[1]: Inserted module 'autofs4'
[ 7.678379] systemd[1]: systemd 246.6-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 7.682373] systemd[1]: Detected architecture ia64.
[ 7.722379] systemd[1]: Set hostname to <glendronach>.
[ 9.258379] systemd[1]: Queued start job for default target Graphical Interface.
[ 9.266373] systemd[1]: Created slice system-getty.slice.
[ 9.266373] systemd[1]: Created slice system-modprobe.slice.
[ 9.266373] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 9.270373] systemd[1]: Created slice User and Session Slice.
[ 9.270373] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 9.274493] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.274493] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 9.274810] systemd[1]: Reached target Local Encrypted Volumes.
[ 9.278810] systemd[1]: Reached target Paths.
[ 9.290379] systemd[1]: Reached target Remote File Systems.
[ 9.290379] systemd[1]: Reached target Slices.
[ 9.302378] systemd[1]: Listening on Syslog Socket.
[ 9.314379] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.314379] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.318379] systemd[1]: Listening on Journal Audit Socket.
[ 9.318379] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.330379] systemd[1]: Listening on Journal Socket.
[ 9.342378] systemd[1]: Listening on udev Control Socket.
[ 9.342378] systemd[1]: Listening on udev Kernel Socket.
[ 9.346378] systemd[1]: Mounting Huge Pages File System...
[ 9.362378] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.363609] systemd[1]: Mounting Kernel Debug File System...
[ 9.363609] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 9.378379] systemd[1]: Starting Set the console keyboard layout...
[ 9.382882] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 9.386373] systemd[1]: Starting Load Kernel Module drm...
[ 9.426378] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 9.426378] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 9.427609] systemd[1]: Starting Journal Service...
[ 9.462379] systemd[1]: Starting Load Kernel Modules...
[ 9.478378] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 9.479609] systemd[1]: Starting Coldplug All udev Devices...
[ 9.482379] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 9.494378] systemd[1]: Finished Load Kernel Modules.
[ 9.506379] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 9.506379] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 9.510378] systemd[1]: Starting Apply Kernel Variables...
[ 9.595609] systemd[1]: Started Journal Service.
[ 10.399663] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[ 12.478877] IPMI message handler: version 39.2
[ 12.526378] ipmi device interface
[ 12.618881] ipmi_si: IPMI System Interface driver
[ 12.618881] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[ 12.618881] ipmi_si IPI0001:00: ipmi_platform: [mem 0xff5bc000-0xff5bc003] regsize 1 spacing 1 irq 0
[ 12.622877] ipmi_si: Adding ACPI-specified kcs state machine
[ 12.623608] ipmi_si: Trying ACPI-specified kcs state machine at mem address 0xff5bc000, slave address 0x0, irq 0
[ 12.671602] sd 0:1:0:0: Attached scsi generic sg0 type 0
[ 12.671602] scsi 0:3:0:0: Attached scsi generic sg1 type 12
[ 12.671602] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[ 12.850881] sr 1:0:0:0: Power-on or device reset occurred
[ 12.950881] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 12.950881] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 13.043662] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x00000b, prod_id: 0x8201, dev_id: 0x32)
[ 13.047608] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 13.059608] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 13.223608] ipmi_ssif: IPMI SSIF Interface driver
[ 15.959607] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 16.034878] [drm] radeon kernel modesetting enabled.
[ 16.034878] radeon 0000:00:03.0: vgaarb: deactivate vga console
[ 16.035611] Console: switching to colour dummy device 80x25
[ 16.035662] Adding 1974256k swap on /dev/sda3. Priority:-2 extents:1 across:1974256k FS
[ 16.042878] GSI 20 (level, low) -> CPU 3 (0x0300) vector 68
[ 16.043607] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x1304 0x02).
[ 16.050875] radeon 0000:00:03.0: VRAM: 128M 0x0000000080000000 - 0x0000000087FFFFFF (32M used)
[ 16.050875] radeon 0000:00:03.0: GTT: 512M 0x0000000060000000 - 0x000000007FFFFFFF
[ 16.050875] [drm] Detected VRAM RAM=128M, BAR=128M
[ 16.054875] [drm] RAM width 16bits DDR
[ 16.055608] [TTM] Zone kernel: Available graphics memory: 1008040 KiB
[ 16.055608] [drm] radeon: 32M of VRAM memory ready
[ 16.055819] [drm] radeon: 512M of GTT memory ready.
[ 16.055819] [drm] GART: num cpu pages 32768, num gpu pages 131072
[ 16.076927] [drm] PCI GART of 512M enabled (table at 0x000000004A300000).
[ 16.076927] radeon 0000:00:03.0: WB disabled
[ 16.076927] radeon 0000:00:03.0: fence driver on ring 0 use gpu addr 0x0000000060000000
[ 16.078377] [drm] radeon: irq initialized.
[ 16.080121] [drm] Loading R100 Microcode
[ 16.226880] [drm] radeon: ring at 0x0000000060004000
[ 16.226880] [drm] ring test succeeded in 0 usecs
[ 16.226880] [drm] ib test succeeded in 0 usecs
[ 16.226880] [drm] No TV DAC info found in BIOS
[ 16.227607] [drm] Radeon Display Connectors
[ 16.230917] [drm] Connector 0:
[ 16.230917] [drm] VGA-1
[ 16.230917] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 16.230917] [drm] Encoders:
[ 16.230917] [drm] CRT1: INTERNAL_DAC1
[ 16.230917] [drm] Connector 1:
[ 16.230917] [drm] VGA-2
[ 16.230917] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[ 16.231935] [drm] Encoders:
[ 16.231935] [drm] CRT2: INTERNAL_DAC2
[ 16.602877] [drm] fb mappable at 0x80040000
[ 16.602877] [drm] vram apper at 0x80000000
[ 16.602877] [drm] size 1572864
[ 16.602877] [drm] fb depth is 16
[ 16.602877] [drm] pitch is 2048
[ 16.752002] Console: switching to colour frame buffer device 128x48
[ 16.838879] radeon 0000:00:03.0: [drm] fb0: radeondrmfb frame buffer device
[ 16.923601] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:03.0 on minor 0
[ 17.227661] kernel unaligned access to 0xe000010047c64046, ip=0xa000000100720841
[ 17.227661] kernel unaligned access to 0xe000010047c64066, ip=0xa000000100720ae1
[ 17.231784] kernel unaligned access to 0xe000010047c6406e, ip=0xa000000100720ae1
[ 17.231784] kernel unaligned access to 0xe000010047c64076, ip=0xa000000100720ae1
[ 17.234377] kernel unaligned access to 0xe000010047c6407e, ip=0xa000000100720ae1
[ 17.242880] audit: type=1400 audit(1616058006.099:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=300 comm="apparmor_parser"
[ 17.242880] audit: type=1400 audit(1616058006.099:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=300 comm="apparmor_parser"
[ 17.250880] audit: type=1400 audit(1616058006.107:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=301 comm="apparmor_parser"
[ 17.250880] audit: type=1400 audit(1616058006.107:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=301 comm="apparmor_parser"
[ 17.252592] audit: type=1400 audit(1616058006.107:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=301 comm="apparmor_parser"
[ 17.274880] audit: type=1400 audit(1616058006.131:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=299 comm="apparmor_parser"
[ 22.967654] tg3 0000:01:02.0 enp1s2f0: Link is up at 1000 Mbps, full duplex
[ 22.967654] tg3 0000:01:02.0 enp1s2f0: Flow control is on for TX and on for RX
[ 22.967654] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s2f0: link becomes ready


--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913

\
 
 \ /
  Last update: 2021-03-18 11:29    [W:2.262 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site