lkml.org 
[lkml]   [2021]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] TI K3 R5F remoteproc support on AM46x SoCs
Date
Hi All,

The following series enhances the K3 R5F remoteproc driver to add support
for the R5F clusters on the newer TI K3 AM64x SoC family. The AM64x SoCs
have 2 R5FSS clusters and no DSPs. Both clusters are capable of supporting
either the conventional Split-mode or a brand new "Single-CPU" mode.

The revised R5FSS IP has the following unique features:
1. The new Single-CPU mode allows the Core1 TCMs to be combined with
the Core0 TCMs effectively doubling the amount of TCMs available.
This is same behavior as LockStep-mode on J7200 SoCs, but all other
previous SoCs could only use the Core0 TCMs. This combined TCMs appear
contiguous at the respective Core0 TCM addresses.
2. TCMs are auto-initialized during module power-up, and the behavior
is programmable through a SEC_MMR register bit. This is same as on
J7200 SoCs, and is not present on earlier AM65x and J721E SoCs.

The series is based on 5.12-rc2, and can apply on top of the current
rproc-next branch as well.

regards
Suman

Suman Anna (2):
dt-bindings: remoteproc: k3-r5f: Update bindings for AM64x SoCs
remoteproc: k3-r5: Extend support to R5F clusters on AM64x SoCs

.../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 31 +++-
drivers/remoteproc/ti_k3_r5_remoteproc.c | 155 ++++++++++++++----
2 files changed, 152 insertions(+), 34 deletions(-)

--
2.30.1

\
 
 \ /
  Last update: 2021-03-18 23:00    [W:0.083 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site