lkml.org 
[lkml]   [2021]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v10 6/8] drivers: thermal: tsens: Use get_temp_common for msm8960
From
Date


On 2/17/21 2:40 PM, Ansuel Smith wrote:
> Rework calibrate function to use common function. Derive the offset from
> a missing hardcoded slope table and the data from the nvmem calib
> efuses.

You are also changing get_temp to use get_temp_common instead of
get_temp_8960 in this patch. Please add it to commit description as
well.I will also consider changing the subject header to something more
generic like
"drivers: thermal: tsens: Replace custom 8960 apis with generic apis"
or anything better.

Otherwise,
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>

Warm Regards
Thara

>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> drivers/thermal/qcom/tsens-8960.c | 56 +++++++++----------------------
> 1 file changed, 15 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
> index 248aaa65b5b0..43ebe4d54672 100644
> --- a/drivers/thermal/qcom/tsens-8960.c
> +++ b/drivers/thermal/qcom/tsens-8960.c
> @@ -67,6 +67,13 @@
> #define S9_STATUS_OFF 0x3674
> #define S10_STATUS_OFF 0x3678
>
> +/* Original slope - 200 to compensate mC to C inaccuracy */
> +u32 tsens_msm8960_slope[] = {
> + 976, 976, 954, 976,
> + 911, 932, 932, 999,
> + 932, 999, 932
> + };
> +
> static int suspend_8960(struct tsens_priv *priv)
> {
> int ret;
> @@ -192,9 +199,7 @@ static int calibrate_8960(struct tsens_priv *priv)
> {
> int i;
> char *data;
> -
> - ssize_t num_read = priv->num_sensors;
> - struct tsens_sensor *s = priv->sensor;
> + u32 p1[11];
>
> data = qfprom_read(priv->dev, "calib");
> if (IS_ERR(data))
> @@ -202,49 +207,18 @@ static int calibrate_8960(struct tsens_priv *priv)
> if (IS_ERR(data))
> return PTR_ERR(data);
>
> - for (i = 0; i < num_read; i++, s++)
> - s->offset = data[i];
> + for (i = 0; i < priv->num_sensors; i++) {
> + p1[i] = data[i];
> + priv->sensor[i].slope = tsens_msm8960_slope[i];
> + }
> +
> + compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB);
>
> kfree(data);
>
> return 0;
> }
>
> -/* Temperature on y axis and ADC-code on x-axis */
> -static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
> -{
> - int slope, offset;
> -
> - slope = thermal_zone_get_slope(s->tzd);
> - offset = CAL_MDEGC - slope * s->offset;
> -
> - return adc_code * slope + offset;
> -}
> -
> -static int get_temp_8960(const struct tsens_sensor *s, int *temp)
> -{
> - int ret;
> - u32 code, trdy;
> - struct tsens_priv *priv = s->priv;
> - unsigned long timeout;
> -
> - timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
> - do {
> - ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
> - if (ret)
> - return ret;
> - if (!(trdy & TRDY_MASK))
> - continue;
> - ret = regmap_read(priv->tm_map, s->status, &code);
> - if (ret)
> - return ret;
> - *temp = code_to_mdegC(code, s);
> - return 0;
> - } while (time_before(jiffies, timeout));
> -
> - return -ETIMEDOUT;
> -}
> -
> static struct tsens_features tsens_8960_feat = {
> .ver_major = VER_0,
> .crit_int = 0,
> @@ -313,7 +287,7 @@ static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
> static const struct tsens_ops ops_8960 = {
> .init = init_common,
> .calibrate = calibrate_8960,
> - .get_temp = get_temp_8960,
> + .get_temp = get_temp_common,
> .enable = enable_8960,
> .disable = disable_8960,
> .suspend = suspend_8960,
>

\
 
 \ /
  Last update: 2021-03-18 22:17    [W:0.223 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site