lkml.org 
[lkml]   [2021]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v10 4/8] drivers: thermal: tsens: Use init_common for msm8960
Date


On 2/17/21 2:40 PM, Ansuel Smith wrote:
> Use init_common and drop custom init for msm8960.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>

Warm Regards
Thara

> --- > drivers/thermal/qcom/tsens-8960.c | 52 +------------------------------
> 1 file changed, 1 insertion(+), 51 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
> index 3f4fc1ffe679..86585f439985 100644
> --- a/drivers/thermal/qcom/tsens-8960.c
> +++ b/drivers/thermal/qcom/tsens-8960.c
> @@ -173,56 +173,6 @@ static void disable_8960(struct tsens_priv *priv)
> regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
> }
>
> -static int init_8960(struct tsens_priv *priv)
> -{
> - int ret, i;
> - u32 reg_cntl;
> -
> - priv->tm_map = dev_get_regmap(priv->dev, NULL);
> - if (!priv->tm_map)
> - return -ENODEV;
> -
> - /*
> - * The status registers for each sensor are discontiguous
> - * because some SoCs have 5 sensors while others have more
> - * but the control registers stay in the same place, i.e
> - * directly after the first 5 status registers.
> - */
> - for (i = 0; i < priv->num_sensors; i++) {
> - if (i >= 5)
> - priv->sensor[i].status = S0_STATUS_ADDR + 40;
> - priv->sensor[i].status += i * 4;
> - }
> -
> - reg_cntl = SW_RST;
> - ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
> - if (ret)
> - return ret;
> -
> - if (priv->num_sensors > 1) {
> - reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
> - reg_cntl &= ~SW_RST;
> - ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
> - CONFIG_MASK, CONFIG);
> - } else {
> - reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
> - reg_cntl &= ~CONFIG_MASK_8660;
> - reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
> - }
> -
> - reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
> - ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
> - if (ret)
> - return ret;
> -
> - reg_cntl |= EN;
> - ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
> - if (ret)
> - return ret;
> -
> - return 0;
> -}
> -
> static int calibrate_8960(struct tsens_priv *priv)
> {
> int i;
> @@ -346,7 +296,7 @@ static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
> };
>
> static const struct tsens_ops ops_8960 = {
> - .init = init_8960,
> + .init = init_common,
> .calibrate = calibrate_8960,
> .get_temp = get_temp_8960,
> .enable = enable_8960,
>

\
 
 \ /
  Last update: 2021-03-18 22:16    [W:0.578 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site