lkml.org 
[lkml]   [2021]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: dwc3: remove 'pm_runtime_set_active' in resume callback
On Wed, Mar 17, 2021 at 05:25:20PM +0900, taehyun cho wrote:
> On Mon, Mar 15, 2021 at 10:13:35AM -0400, Alan Stern wrote:
> > On Mon, Mar 15, 2021 at 04:43:17PM +0900, taehyun cho wrote:
> > > 'pm_runtime_set_active' sets a flag to describe rumtime status.
> > > This flag is automatically set in pm_runtime_get_sync/put_sync API.
> > > 'pm_runtime_set_active' checks the runtime status of parent device.
> > > As a result, the below error message is printed.
> > > dwc3 11110000.dwc3: runtime PM trying to activate child device
> > > 11110000.dwc3 but parent (11110000.usb) is not active.
> >
> > This is very suspicious. That error message indicates a real error is
> > present; removing these pm_runtime_set_active calls won't fix the error.
> >
> > You need to determine why the parent platform device 11110000.usb isn't
> > active when the dwc3 probe and resume routines are called. It seems
> > likely that there is a bug in the platform device's driver.
> >
> > Alan Stern
> >
>
> Alan,
>
> Thanks to your comments, I checked our platform device driver and found
> the problem. Our parent platform device didn't set active in resume
> callback. This made a problem.

Ah, good. Does the platform driver set the active flag in its probe
routine?

> Thank you for the help and sorry for
> disturbing you.

No problem at all.

Alan Stern

\
 
 \ /
  Last update: 2021-03-17 16:49    [W:1.647 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site