lkml.org 
[lkml]   [2021]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 05/22] dt-bindings: add BCM6328 pincontroller binding documentation
From
Date
Hi Rob,

> El 16 mar 2021, a las 21:59, Rob Herring <robh@kernel.org> escribió:
>
> On Mon, Mar 15, 2021 at 12:41:57PM +0100, Álvaro Fernández Rojas wrote:
>> Add binding documentation for the pincontrol core found in BCM6328 SoCs.
>>
>> Co-developed-by: Jonas Gorski <jonas.gorski@gmail.com>
>> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
>> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
>> ---
>> v7: add changes suggested by Rob Herring
>> v6: add changes suggested by Rob Herring
>> v5: change Documentation to dt-bindings in commit title
>> v4: no changes
>> v3: add new gpio node
>> v2: remove interrupts
>>
>> .../pinctrl/brcm,bcm6328-pinctrl.yaml | 132 ++++++++++++++++++
>> 1 file changed, 132 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..e1ecdc578f32
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
>> @@ -0,0 +1,132 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Broadcom BCM6328 pin controller
>> +
>> +maintainers:
>> + - Álvaro Fernández Rojas <noltari@gmail.com>
>> + - Jonas Gorski <jonas.gorski@gmail.com>
>> +
>> +description: |+
>> + The pin controller node should be the child of a syscon node.
>> +
>> + Refer to the the bindings described in
>> + Documentation/devicetree/bindings/mfd/syscon.yaml
>> +
>> +properties:
>> + compatible:
>> + const: brcm,bcm6328-pinctrl
>> +
>> + reg:
>> + maxItems: 1
>> +
>> +patternProperties:
>> + '^.*-pins$':
>
> '-pins$' is equivalent.
>
>> + if:
>> + type: object
>> + then:
>
> You don't need this if/then. This should be:
>
> '-pins$':
> type: object
> $ref: pinmux-node.yaml#
>
> additionalProperties: false
> properties:
> ...

If I add "additionalProperties: false" I get the following error:
/home/noltari/workspace/linux/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.example.dt.yaml: pinctrl@18: serial_led-pins: 'serial_led_clk-pins', 'serial_led_data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /home/noltari/workspace/linux/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml

>
>> + properties:
>> + function:
>> + $ref: "pinmux-node.yaml#/properties/function"
>
> Drop this as you need the $ref up a level.
>
>> + enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
>> + led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
>> + ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
>> +
>> + pins:
>> + $ref: "pinmux-node.yaml#/properties/pins"
>> + enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
>> + gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
>> + usb_port1 ]
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + pinctrl@18 {
>> + compatible = "brcm,bcm6328-pinctrl";
>> + reg = <0x18 0x10>;
>> +
>> + pinctrl_serial_led: serial_led-pins {
>> + pinctrl_serial_led_data: serial_led_data-pins {
>> + function = "serial_led_data";
>> + pins = "gpio6";
>> + };
>> +
>> + pinctrl_serial_led_clk: serial_led_clk-pins {
>> + function = "serial_led_clk";
>> + pins = "gpio7";
>> + };
>> + };
>> +
>> + pinctrl_inet_act_led: inet_act_led-pins {
>> + function = "inet_act_led";
>> + pins = "gpio11";
>> + };
>> +
>> + pinctrl_pcie_clkreq: pcie_clkreq-pins {
>> + function = "pcie_clkreq";
>> + pins = "gpio16";
>> + };
>> +
>> + pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
>> + function = "led";
>> + pins = "gpio17";
>> + };
>> +
>> + pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
>> + function = "led";
>> + pins = "gpio18";
>> + };
>> +
>> + pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
>> + function = "led";
>> + pins = "gpio19";
>> + };
>> +
>> + pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
>> + function = "led";
>> + pins = "gpio20";
>> + };
>> +
>> + pinctrl_ephy0_act_led: ephy0_act_led-pins {
>> + function = "ephy0_act_led";
>> + pins = "gpio25";
>> + };
>> +
>> + pinctrl_ephy1_act_led: ephy1_act_led-pins {
>> + function = "ephy1_act_led";
>> + pins = "gpio26";
>> + };
>> +
>> + pinctrl_ephy2_act_led: ephy2_act_led-pins {
>> + function = "ephy2_act_led";
>> + pins = "gpio27";
>> + };
>> +
>> + pinctrl_ephy3_act_led: ephy3_act_led-pins {
>> + function = "ephy3_act_led";
>> + pins = "gpio28";
>> + };
>> +
>> + pinctrl_hsspi_cs1: hsspi_cs1-pins {
>> + function = "hsspi_cs1";
>> + pins = "hsspi_cs1";
>> + };
>> +
>> + pinctrl_usb_port1_device: usb_port1_device-pins {
>> + function = "usb_device_port";
>> + pins = "usb_port1";
>> + };
>> +
>> + pinctrl_usb_port1_host: usb_port1_host-pins {
>> + function = "usb_host_port";
>> + pins = "usb_port1";
>> + };
>> + };
>> --
>> 2.20.1

\
 
 \ /
  Last update: 2021-03-17 13:57    [W:0.071 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site