lkml.org 
[lkml]   [2021]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 21/36] scsi: isci: host: Fix bunch of kernel-doc related issues
Date
Fixes the following W=1 kernel build warning(s):

drivers/scsi/isci/host.c:93: warning: Cannot understand *
drivers/scsi/isci/host.c:108: warning: Function parameter or member 'x' not described in 'NORMALIZE_PUT_POINTER'
drivers/scsi/isci/host.c:121: warning: Function parameter or member 'x' not described in 'NORMALIZE_EVENT_POINTER'
drivers/scsi/isci/host.c:130: warning: Function parameter or member 'x' not described in 'NORMALIZE_GET_POINTER'
drivers/scsi/isci/host.c:139: warning: Function parameter or member 'x' not described in 'NORMALIZE_GET_POINTER_CYCLE_BIT'
drivers/scsi/isci/host.c:146: warning: Function parameter or member 'x' not described in 'COMPLETION_QUEUE_CYCLE_BIT'
drivers/scsi/isci/host.c:646: warning: Function parameter or member 'ihost' not described in 'isci_host_start_complete'
drivers/scsi/isci/host.c:646: warning: Excess function parameter 'isci_host' description in 'isci_host_start_complete'
drivers/scsi/isci/host.c:680: warning: Function parameter or member 'ihost' not described in 'sci_controller_get_suggested_start_timeout'
drivers/scsi/isci/host.c:680: warning: Excess function parameter 'controller' description in 'sci_controller_get_suggested_start_timeout'
drivers/scsi/isci/host.c:903: warning: Function parameter or member 'ihost' not described in 'sci_controller_start_next_phy'
drivers/scsi/isci/host.c:903: warning: Excess function parameter 'scic' description in 'sci_controller_start_next_phy'
drivers/scsi/isci/host.c:1159: warning: Function parameter or member 'ihost' not described in 'sci_controller_stop'
drivers/scsi/isci/host.c:1159: warning: Excess function parameter 'controller' description in 'sci_controller_stop'
drivers/scsi/isci/host.c:1184: warning: Function parameter or member 'ihost' not described in 'sci_controller_reset'
drivers/scsi/isci/host.c:1184: warning: Excess function parameter 'controller' description in 'sci_controller_reset'
drivers/scsi/isci/host.c:1352: warning: Function parameter or member 'ihost' not described in 'sci_controller_set_interrupt_coalescence'
drivers/scsi/isci/host.c:1352: warning: Excess function parameter 'controller' description in 'sci_controller_set_interrupt_coalescence'
drivers/scsi/isci/host.c:2498: warning: Function parameter or member 'ihost' not described in 'sci_controller_allocate_remote_node_context'
drivers/scsi/isci/host.c:2498: warning: Function parameter or member 'idev' not described in 'sci_controller_allocate_remote_node_context'
drivers/scsi/isci/host.c:2498: warning: expecting prototype for This method allocates remote node index and the reserves the remote node(). Prototype was for sci_controller_allocate_remote_node_context() instead
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'ihost' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'idev' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Function parameter or member 'ireq' not described in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'controller' description in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'remote_device' description in 'sci_controller_start_task'
drivers/scsi/isci/host.c:2721: warning: Excess function parameter 'task_request' description in 'sci_controller_start_task'

Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/scsi/isci/host.c | 37 ++++++++++++++++++-------------------
1 file changed, 18 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 7ebfa3c8cdc78..d690d9cf7eb15 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -89,16 +89,14 @@

#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100

-/**
- *
- *
+/*
* The number of milliseconds to wait while a given phy is consuming power
* before allowing another set of phys to consume power. Ultimately, this will
* be specified by OEM parameter.
*/
#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500

-/**
+/*
* NORMALIZE_PUT_POINTER() -
*
* This macro will normalize the completion queue put pointer so its value can
@@ -108,7 +106,7 @@
((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK)


-/**
+/*
* NORMALIZE_EVENT_POINTER() -
*
* This macro will normalize the completion queue event entry so its value can
@@ -120,7 +118,7 @@
>> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \
)

-/**
+/*
* NORMALIZE_GET_POINTER() -
*
* This macro will normalize the completion queue get pointer so its value can
@@ -129,7 +127,7 @@
#define NORMALIZE_GET_POINTER(x) \
((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK)

-/**
+/*
* NORMALIZE_GET_POINTER_CYCLE_BIT() -
*
* This macro will normalize the completion queue cycle pointer so it matches
@@ -138,7 +136,7 @@
#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \
((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT))

-/**
+/*
* COMPLETION_QUEUE_CYCLE_BIT() -
*
* This macro will return the cycle bit of the completion queue entry
@@ -637,7 +635,7 @@ irqreturn_t isci_error_isr(int vec, void *data)
/**
* isci_host_start_complete() - This function is called by the core library,
* through the ISCI Module, to indicate controller start status.
- * @isci_host: This parameter specifies the ISCI host object
+ * @ihost: This parameter specifies the ISCI host object
* @completion_status: This parameter specifies the completion status from the
* core library.
*
@@ -670,7 +668,7 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time)
* use any timeout value, but this method provides the suggested minimum
* start timeout value. The returned value is based upon empirical
* information determined as a result of interoperability testing.
- * @controller: the handle to the controller object for which to return the
+ * @ihost: the handle to the controller object for which to return the
* suggested start timeout.
*
* This method returns the number of milliseconds for the suggested start
@@ -893,7 +891,7 @@ bool is_controller_start_complete(struct isci_host *ihost)

/**
* sci_controller_start_next_phy - start phy
- * @scic: controller
+ * @ihost: controller
*
* If all the phys have been started, then attempt to transition the
* controller to the READY state and inform the user
@@ -1145,7 +1143,7 @@ void isci_host_completion_routine(unsigned long data)
* controller has been quiesced. This method will ensure that all IO
* requests are quiesced, phys are stopped, and all additional operation by
* the hardware is halted.
- * @controller: the handle to the controller object to stop.
+ * @ihost: the handle to the controller object to stop.
* @timeout: This parameter specifies the number of milliseconds in which the
* stop operation should complete.
*
@@ -1174,7 +1172,7 @@ static enum sci_status sci_controller_stop(struct isci_host *ihost, u32 timeout)
* considered destructive. In other words, all current operations are wiped
* out. No IO completions for outstanding devices occur. Outstanding IO
* requests are not aborted or completed at the actual remote device.
- * @controller: the handle to the controller object to reset.
+ * @ihost: the handle to the controller object to reset.
*
* Indicate if the controller reset method succeeded or failed in some way.
* SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if
@@ -1331,7 +1329,7 @@ static inline void sci_controller_starting_state_exit(struct sci_base_state_mach
/**
* sci_controller_set_interrupt_coalescence() - This method allows the user to
* configure the interrupt coalescence.
- * @controller: This parameter represents the handle to the controller object
+ * @ihost: This parameter represents the handle to the controller object
* for which its interrupt coalesce register is overridden.
* @coalesce_number: Used to control the number of entries in the Completion
* Queue before an interrupt is generated. If the number of entries exceed
@@ -2479,12 +2477,13 @@ struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag)
}

/**
+ * sci_controller_allocate_remote_node_context()
* This method allocates remote node index and the reserves the remote node
* context space for use. This method can fail if there are no more remote
* node index available.
- * @scic: This is the controller object which contains the set of
+ * @ihost: This is the controller object which contains the set of
* free remote node ids
- * @sci_dev: This is the device object which is requesting the a remote node
+ * @idev: This is the device object which is requesting the a remote node
* id
* @node_id: This is the remote node id that is assinged to the device if one
* is available
@@ -2709,11 +2708,11 @@ enum sci_status sci_controller_continue_io(struct isci_request *ireq)
/**
* sci_controller_start_task() - This method is called by the SCIC user to
* send/start a framework task management request.
- * @controller: the handle to the controller object for which to start the task
+ * @ihost: the handle to the controller object for which to start the task
* management request.
- * @remote_device: the handle to the remote device object for which to start
+ * @idev: the handle to the remote device object for which to start
* the task management request.
- * @task_request: the handle to the task request object to start.
+ * @ireq: the handle to the task request object to start.
*/
enum sci_status sci_controller_start_task(struct isci_host *ihost,
struct isci_remote_device *idev,
--
2.27.0
\
 
 \ /
  Last update: 2021-03-17 10:14    [W:0.204 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site