lkml.org 
[lkml]   [2021]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4] rtc: rx6110: add ACPI bindings to I2C
From
Date
Hi Andy,

On 2021-03-16 17:55, Andy Shevchenko wrote:
> On Tue, Mar 16, 2021 at 03:48:18PM +0100, Claudius Heine wrote:
>> From: Johannes Hahn <johannes-hahn@siemens.com>
>>
>> This allows the RX6110 driver to be automatically assigned to the right
>> device on the I2C bus.
>
> You missed given tag, when somebody sends you one, it's usually your
> responsibility to pick it up. Hint: install b4 tool (likely in your distro, at
> least Debian, Arch Linux have it) and run it against message ID of the version
> in question. It will gather all tags. For example, for this case, run
>
> % b4 am 20210316144819.4130622-1-ch@denx.de
>
> It will download mailbox suitable for `git am ...` you will read on the screen.
>
> Also, when send a new version, don't attach it to the old thread. It will
> confuse people and maybe even tools (i.o.w. don't supply message ID to be put
> to In-Reply-To header).

Ok.

>
> So, repeat again my tag and see one fix to be performed below.
> Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Ok, will take care about this in v5.

>
>> Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com>
>> Co-developed-by: Claudius Heine <ch@denx.de>
>> Signed-off-by: Claudius Heine <ch@denx.de>
>> ---
>> drivers/rtc/rtc-rx6110.c | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/drivers/rtc/rtc-rx6110.c b/drivers/rtc/rtc-rx6110.c
>> index 79161d4c6ce4..2a06953c0a84 100644
>> --- a/drivers/rtc/rtc-rx6110.c
>> +++ b/drivers/rtc/rtc-rx6110.c
>> @@ -447,6 +447,12 @@ static int rx6110_i2c_probe(struct i2c_client *client,
>> return rx6110_probe(rx6110, &client->dev);
>> }
>>
>> +static const struct acpi_device_id rx6110_i2c_acpi_match[] = {
>> + { "SECC6110" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(acpi, rx6110_i2c_acpi_match);
>> +
>> static const struct i2c_device_id rx6110_i2c_id[] = {
>> { "rx6110", 0 },
>> { }
>> @@ -456,6 +462,7 @@ MODULE_DEVICE_TABLE(i2c, rx6110_i2c_id);
>> static struct i2c_driver rx6110_i2c_driver = {
>> .driver = {
>> .name = RX6110_DRIVER_NAME,
>> + .acpi_match_table = ACPI_PTR(rx6110_i2c_acpi_match),
>
> Since you drop ifdeffery above, you have to drop ACPI_PTR() (besides that
> ACPI_PTR() requires acpi.h to be included).

Ok, will do that as well.

regards,
Claudius

\
 
 \ /
  Last update: 2021-03-17 08:55    [W:0.089 / U:1.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site