lkml.org 
[lkml]   [2021]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRE: Re: [PATCH v29 4/4] scsi: ufs: Add HPB 2.0 support
From
Date
>On 2021-03-18 10:02, Daejun Park wrote:
>>> On 2021-03-17 09:42, Daejun Park wrote:
>>>>> On 2021-03-15 15:23, Can Guo wrote:
>>>>>> On 2021-03-15 15:07, Daejun Park wrote:
>>>>>>>>> This patch supports the HPB 2.0.
>>>>>>>>>
>>>>>>>>> The HPB 2.0 supports read of varying sizes from 4KB to 512KB.
>>>>>>>>> In the case of Read (<= 32KB) is supported as single HPB read.
>>>>>>>>> In the case of Read (36KB ~ 512KB) is supported by as a
>>>>>>>>> combination
>>>>>>>>> of
>>>>>>>>> write buffer command and HPB read command to deliver more PPN.
>>>>>>>>> The write buffer commands may not be issued immediately due to
>>>>>>>>> busy
>>>>>>>>> tags.
>>>>>>>>> To use HPB read more aggressively, the driver can requeue the
>>>>>>>>> write
>>>>>>>>> buffer
>>>>>>>>> command. The requeue threshold is implemented as timeout and can
>>>>>>>>> be
>>>>>>>>> modified with requeue_timeout_ms entry in sysfs.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Daejun Park <daejun7.park@samsung.com>
>>>>>>>>> ---
>>>>>>>>> +static struct attribute *hpb_dev_param_attrs[] = {
>>>>>>>>> + &dev_attr_requeue_timeout_ms.attr,
>>>>>>>>> + NULL,
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>> +struct attribute_group ufs_sysfs_hpb_param_group = {
>>>>>>>>> + .name = "hpb_param_sysfs",
>>>>>>>>> + .attrs = hpb_dev_param_attrs,
>>>>>>>>> +};
>>>>>>>>> +
>>>>>>>>> +static int ufshpb_pre_req_mempool_init(struct ufshpb_lu *hpb)
>>>>>>>>> +{
>>>>>>>>> + struct ufshpb_req *pre_req = NULL;
>>>>>>>>> + int qd = hpb->sdev_ufs_lu->queue_depth / 2;
>>>>>>>>> + int i, j;
>>>>>>>>> +
>>>>>>>>> + INIT_LIST_HEAD(&hpb->lh_pre_req_free);
>>>>>>>>> +
>>>>>>>>> + hpb->pre_req = kcalloc(qd, sizeof(struct ufshpb_req),
>>>>>>>>> GFP_KERNEL);
>>>>>>>>> + hpb->throttle_pre_req = qd;
>>>>>>>>> + hpb->num_inflight_pre_req = 0;
>>>>>>>>> +
>>>>>>>>> + if (!hpb->pre_req)
>>>>>>>>> + goto release_mem;
>>>>>>>>> +
>>>>>>>>> + for (i = 0; i < qd; i++) {
>>>>>>>>> + pre_req = hpb->pre_req + i;
>>>>>>>>> + INIT_LIST_HEAD(&pre_req->list_req);
>>>>>>>>> + pre_req->req = NULL;
>>>>>>>>> + pre_req->bio = NULL;
>>>>>>>>
>>>>>>>> Why don't prepare bio as same as wb.m_page? Won't that save more
>>>>>>>> time
>>>>>>>> for ufshpb_issue_pre_req()?
>>>>>>>
>>>>>>> It is pre_req pool. So although we prepare bio at this time, it
>>>>>>> just
>>>>>>> only for first pre_req.
>>>>>>
>>>>>> I meant removing the bio_alloc() in ufshpb_issue_pre_req() and
>>>>>> bio_put()
>>>>>> in ufshpb_pre_req_compl_fn(). bios, in pre_req's case, just hold a
>>>>>> page.
>>>>>> So, prepare 16 (if queue depth is 32) bios here, just use them
>>>>>> along
>>>>>> with
>>>>>> wb.m_page and call bio_reset() in ufshpb_pre_req_compl_fn(). Shall
>>>>>> it
>>>>>> work?
>>>>>>
>>>>>
>>>>> If it works, you can even have the bio_add_pc_page() called here.
>>>>> Later
>>>>> in
>>>>> ufshpb_execute_pre_req(), you don't need to call
>>>>> ufshpb_pre_req_add_bio_page(),
>>>>> just call ufshpb_prep_entry() once instead - it save many repeated
>>>>> steps
>>>>> for a
>>>>> pre_req, and you don't even need to call bio_reset() in this case,
>>>>> since
>>>>> for a
>>>>> bio, nothing changes after it is binded with a specific page...
>>>>
>>>> Hi, Can Guo
>>>>
>>>> I tried the idea that you suggested, but it doesn't work properly.
>>>> This optimization should be done next time for enhancement.
>>>
>>> Can you elaborate please? Any error seen?
>>>
>>> Per my understanding, in the case for pre_reqs, a bio is no different
>>> from a page. Here it can reserve 16 pages for later use, which can be
>>> done the same for bios.
>>
>> I found some problem with re-using pre allocated bio.
>>
>> The following kernel message is related with problem.
>> [ 2.750530] ------------[ cut here ]------------
>> [ 2.751404] WARNING: CPU: 4 PID: 170 at
>> drivers/scsi/scsi_lib.c:1020 scsi_alloc_sgtables+0x253/0x2b0
>> [ 2.753054] Modules linked in:
>> [ 2.753651] CPU: 4 PID: 170 Comm: mount Not tainted 5.12.0-rc1+ #331
>> [ 2.754752] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
>> BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
>> [ 2.756813] RIP: 0010:scsi_alloc_sgtables+0x253/0x2b0
>> [ 2.757699] Code: 85 c0 74 19 41 0f b6 44 24 18 8d 50 e0 83 fa 03
>> 76 30 41 bd 01 00 00 00 e9 1f fe ff ff be 01 00 00 00 45 31 ed e9 19
>> fe ff ff <0f> 0b b8 0a f
>> [ 2.761021] RSP: 0018:ffffb06e0027f538 EFLAGS: 00010246
>> [ 2.761902] RAX: 0000000000000000 RBX: ffff9c3a42d424d0 RCX:
>> ffffb06e0027f5e0
>> [ 2.763184] RDX: ffff9c3a42d426a8 RSI: 0000000000000000 RDI:
>> ffff9c3a42d424d0
>> [ 2.764446] RBP: ffffb06e0027f570 R08: 0000000000000000 R09:
>> 0000000000000000
>> [ 2.765704] R10: ffffffff8eb0dda0 R11: 00000000fffb7675 R12:
>> ffff9c3a42d423c0
>> [ 2.766976] R13: 0000000000000000 R14: ffff9c3a41bed000 R15:
>> ffff9c3a420f4000
>> [ 2.768225] FS: 00007f42d1eab100(0000) GS:ffff9c3b77c00000(0000)
>> knlGS:0000000000000000
>> [ 2.769666] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 2.770719] CR2: 00007f42d1ac1000 CR3: 0000000104bee006 CR4:
>> 0000000000370ee0
>> [ 2.771997] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
>> 0000000000000000
>> [ 2.773288] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
>> 0000000000000400
>> [ 2.774543] Call Trace:
>> [ 2.775092] scsi_queue_rq+0x9b6/0xb20
>> [ 2.775754] __blk_mq_try_issue_directly+0x150/0x1f0
>> [ 2.776636] blk_mq_request_issue_directly+0x49/0x80
>> [ 2.777616] blk_insert_cloned_request+0x85/0xd0
>> [ 2.778470] ufshpb_prep.cold+0x793/0x7be
>> [ 2.779179] ufshcd_queuecommand+0x114/0x690
>> [ 2.779986] scsi_queue_rq+0x38a/0xb20
>> [ 2.780755] blk_mq_dispatch_rq_list+0x13d/0x760
>> [ 2.781605] ? dd_dispatch_request+0x67/0x1c0
>> [ 2.782337] __blk_mq_do_dispatch_sched+0xb5/0x2c0
>> [ 2.783291] __blk_mq_sched_dispatch_requests+0x13c/0x180
>> [ 2.784209] blk_mq_sched_dispatch_requests+0x30/0x60
>> [ 2.785195] __blk_mq_run_hw_queue+0x49/0x90
>> [ 2.786024] __blk_mq_delay_run_hw_queue+0x162/0x180
>> [ 2.786890] blk_mq_run_hw_queue+0x85/0xe0
>> [ 2.787590] blk_mq_sched_insert_requests+0xdf/0x2b0
>> [ 2.788558] blk_mq_flush_plug_list+0x118/0x240
>> [ 2.789405] blk_flush_plug_list+0xde/0x110
>> [ 2.790225] blk_finish_plug+0x21/0x30
>> [ 2.790878] read_pages+0x16a/0x1d0
>> [ 2.791534] page_cache_ra_unbounded+0x123/0x1c0
>> [ 2.792392] do_page_cache_ra+0x38/0x40
>> [ 2.793183] force_page_cache_ra+0x97/0x110
>> [ 2.793875] page_cache_sync_ra+0x26/0x50
>> [ 2.794671] filemap_get_pages+0xc8/0x4b0
>> [ 2.795482] filemap_read+0xc9/0x340
>> [ 2.796144] ? find_held_lock+0x31/0x90
>> [ 2.796809] generic_file_read_iter+0xcc/0x130
>> [ 2.797644] blkdev_read_iter+0x30/0x40
>> [ 2.798436] new_sync_read+0x10e/0x190
>> [ 2.799112] vfs_read+0x178/0x1d0
>> [ 2.799732] ksys_read+0x6b/0xf0
>> [ 2.800361] __x64_sys_read+0x15/0x20
>> [ 2.801027] do_syscall_64+0x38/0x50
>> [ 2.801770] entry_SYSCALL_64_after_hwframe+0x44/0xae
>> [ 2.802655] RIP: 0033:0x7f42d209a461
>> [ 2.803313] Code: fe ff ff 50 48 8d 3d fe d0 09 00 e8 e9 03 02 00
>> 66 0f 1f 84 00 00 00 00 00 48 8d 05 99 62 0d 00 8b 00 85 c0 75 13 31
>> c0 0f 05 <48> 3d 00 f0 8
>> [ 2.806632] RSP: 002b:00007ffe7b88bc88 EFLAGS: 00000246 ORIG_RAX:
>> 0000000000000000
>> [ 2.807942] RAX: ffffffffffffffda RBX: 000055ccb2e070d0 RCX:
>> 00007f42d209a461
>> [ 2.809218] RDX: 0000000000040000 RSI: 00007f42d1ac1038 RDI:
>> 0000000000000004
>> [ 2.810482] RBP: 000055ccb2e07120 R08: 00007f42d1ac1010 R09:
>> 0000000000000000
>> [ 2.811729] R10: 0000000000000022 R11: 0000000000000246 R12:
>> 0000003b95fc0000
>> [ 2.813005] R13: 0000000000040000 R14: 00007f42d1ac1028 R15:
>> 00007f42d1ac1010
>> [ 2.814276] irq event stamp: 9319
>> [ 2.814868] hardirqs last enabled at (9327): [<ffffffff8c4d2033>]
>> console_unlock+0x4d3/0x5e0
>> [ 2.816349] hardirqs last disabled at (9336): [<ffffffff8c4d1fa6>]
>> console_unlock+0x446/0x5e0
>> [ 2.817837] softirqs last enabled at (8674): [<ffffffff8d4002ec>]
>> __do_softirq+0x2ec/0x40f
>> [ 2.819298] softirqs last disabled at (8669): [<ffffffff8c46ad9e>]
>> irq_exit_rcu+0xae/0xb0
>> [ 2.820744] ---[ end trace af3986a7787eeecf ]---
>>
>> It is related to bi_iter value of bio is changed after use it.
>>
>
>Can you share the change through attechment?

Sure,

diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index 3522197b977e..7288eda44018 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -335,7 +335,7 @@ static inline void ufshpb_put_pre_req(struct ufshpb_lu *hpb,
struct ufshpb_req *pre_req)
{
pre_req->req = NULL;
- pre_req->bio = NULL;
+ //pre_req->bio = NULL;
list_add_tail(&pre_req->list_req, &hpb->lh_pre_req_free);
hpb->num_inflight_pre_req--;
}
@@ -363,7 +363,6 @@ static void ufshpb_pre_req_compl_fn(struct request *req, blk_status_t error)
sshdr.byte6, sshdr.additional_length);
}

- bio_put(pre_req->bio);
blk_mq_free_request(req);
spin_lock_irqsave(&hpb->rgn_state_lock, flags);
ufshpb_put_pre_req(pre_req->hpb, pre_req);
@@ -427,27 +426,14 @@ static int ufshpb_prep_entry(struct ufshpb_req *pre_req, struct page *page)
}

static int ufshpb_pre_req_add_bio_page(struct ufshpb_lu *hpb,
- struct request_queue *q,
struct ufshpb_req *pre_req)
{
- struct page *page = pre_req->wb.m_page;
- struct bio *bio = pre_req->bio;
- int entries_bytes, ret;
-
- if (!page)
+ if (!pre_req->wb.m_page)
return -ENOMEM;

- if (ufshpb_prep_entry(pre_req, page))
+ if (ufshpb_prep_entry(pre_req, pre_req->wb.m_page))
return -ENOMEM;

- entries_bytes = pre_req->wb.len * sizeof(u64);
-
- ret = bio_add_pc_page(q, bio, page, entries_bytes, 0);
- if (ret != entries_bytes) {
- dev_err(&hpb->sdev_ufs_lu->sdev_dev,
- "bio_add_pc_page fail: %d", ret);
- return -ENOMEM;
- }
return 0;
}

@@ -472,7 +458,7 @@ static int ufshpb_execute_pre_req(struct ufshpb_lu *hpb, struct scsi_cmnd *cmd,
blk_rq_pos(cmd->request));
pre_req->wb.len = sectors_to_logical(cmd->device,
blk_rq_sectors(cmd->request));
- if (ufshpb_pre_req_add_bio_page(hpb, q, pre_req))
+ if (ufshpb_pre_req_add_bio_page(hpb, pre_req))
return -ENOMEM;

req = pre_req->req;
@@ -482,7 +468,7 @@ static int ufshpb_execute_pre_req(struct ufshpb_lu *hpb, struct scsi_cmnd *cmd,
req->rq_disk = NULL;
req->end_io_data = (void *)pre_req;
req->end_io = ufshpb_pre_req_compl_fn;
-
+ dev_err(&hpb->sdev_ufs_lu->sdev_dev, "bi vcnt %d\n",bio->bi_vcnt);
/* 2. scsi_request setup */
rq = scsi_req(req);
rq->retries = 1;
@@ -504,7 +490,6 @@ static int ufshpb_issue_pre_req(struct ufshpb_lu *hpb, struct scsi_cmnd *cmd,
{
struct ufshpb_req *pre_req;
struct request *req = NULL;
- struct bio *bio = NULL;
unsigned long flags;
int _read_id;
int ret = 0;
@@ -514,12 +499,6 @@ static int ufshpb_issue_pre_req(struct ufshpb_lu *hpb, struct scsi_cmnd *cmd,
if (IS_ERR(req))
return -EAGAIN;

- bio = bio_alloc(GFP_ATOMIC, 1);
- if (!bio) {
- blk_put_request(req);
- return -EAGAIN;
- }
-
spin_lock_irqsave(&hpb->rgn_state_lock, flags);
pre_req = ufshpb_get_pre_req(hpb);
if (!pre_req) {
@@ -530,7 +509,7 @@ static int ufshpb_issue_pre_req(struct ufshpb_lu *hpb, struct scsi_cmnd *cmd,
spin_unlock_irqrestore(&hpb->rgn_state_lock, flags);

pre_req->req = req;
- pre_req->bio = bio;
+ dev_err(&hpb->sdev_ufs_lu->sdev_dev,"bio->bi_vcnt %d\n",pre_req->bio->bi_vcnt);

ret = ufshpb_execute_pre_req(hpb, cmd, pre_req, _read_id);
if (ret)
@@ -544,7 +523,6 @@ static int ufshpb_issue_pre_req(struct ufshpb_lu *hpb, struct scsi_cmnd *cmd,
ufshpb_put_pre_req(hpb, pre_req);
unlock_out:
spin_unlock_irqrestore(&hpb->rgn_state_lock, flags);
- bio_put(bio);
blk_put_request(req);
return ret;
}
@@ -625,7 +603,6 @@ int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
dev_err(hba->dev, "get ppn failed. err %d\n", err);
return err;
}
-
if (!ufshpb_is_legacy(hba) &&
ufshpb_is_required_wb(hpb, transfer_len)) {
err = ufshpb_issue_pre_req(hpb, cmd, &read_id);
@@ -1809,9 +1786,9 @@ struct attribute_group ufs_sysfs_hpb_param_group = {

static int ufshpb_pre_req_mempool_init(struct ufshpb_lu *hpb)
{
- struct ufshpb_req *pre_req = NULL;
+ struct ufshpb_req *pre_req = NULL, *t;
int qd = hpb->sdev_ufs_lu->queue_depth / 2;
- int i, j;
+ int i;

INIT_LIST_HEAD(&hpb->lh_pre_req_free);

@@ -1823,23 +1800,46 @@ static int ufshpb_pre_req_mempool_init(struct ufshpb_lu *hpb)
goto release_mem;

for (i = 0; i < qd; i++) {
+ int ret;
+
pre_req = hpb->pre_req + i;
INIT_LIST_HEAD(&pre_req->list_req);
pre_req->req = NULL;
- pre_req->bio = NULL;
+
+ pre_req->bio = bio_alloc(GFP_KERNEL, 1);
+ if (!pre_req->bio)
+ goto release_mem;

pre_req->wb.m_page = alloc_page(GFP_KERNEL | __GFP_ZERO);
if (!pre_req->wb.m_page) {
- for (j = 0; j < i; j++)
- __free_page(hpb->pre_req[j].wb.m_page);
+ bio_put(pre_req->bio);
+ goto release_mem;
+ }
+
+ ret = bio_add_pc_page(hpb->sdev_ufs_lu->request_queue,
+ pre_req->bio, pre_req->wb.m_page,
+ PAGE_SIZE, 0);
+ dev_err(&hpb->sdev_ufs_lu->sdev_dev,"bio->bi_vcnt %d\n",pre_req->bio->bi_vcnt);
+ if (ret != PAGE_SIZE) {
+ dev_err(&hpb->sdev_ufs_lu->sdev_dev,
+ "bio_add_pc_page fail: %d", ret);

+ bio_put(pre_req->bio);
+ __free_page(pre_req->wb.m_page);
goto release_mem;
}
+
list_add_tail(&pre_req->list_req, &hpb->lh_pre_req_free);
}

return 0;
release_mem:
+ list_for_each_entry_safe(pre_req, t, &hpb->lh_pre_req_free, list_req) {
+ list_del_init(&pre_req->list_req);
+ bio_put(pre_req->bio);
+ __free_page(pre_req->wb.m_page);
+ }
+
kfree(hpb->pre_req);
return -ENOMEM;
}
@@ -1851,6 +1851,7 @@ static void ufshpb_pre_req_mempool_destroy(struct ufshpb_lu *hpb)

for (i = 0; i < hpb->throttle_pre_req; i++) {
pre_req = hpb->pre_req + i;
+ bio_put(hpb->pre_req[i].bio);
if (!pre_req->wb.m_page)
__free_page(hpb->pre_req[i].wb.m_page);
list_del_init(&pre_req->list_req);


>Thanks,
>Can Guo.
>
>> Thanks,
>> Daejun
>>
>>> This is not an enhancement, but a doubt - why not? Unless it is not
>>> doable.
>>>
>>> Thanks,
>>> Can Guo.
>>>
>>>>
>>>> Thanks
>>>> Daejun
>>>>
>>>>> Can Guo.
>>>>>
>>>>>> Thanks,
>>>>>> Can Guo.
>>>>>>
>>>>>>> After use it, it should be prepared bio at issue phase.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Daejun
>>>>>>>
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Can Guo.
>>>>>>>>
>>>>>>>>> +
>>>>>>>>> + pre_req->wb.m_page = alloc_page(GFP_KERNEL |
>>>>>>>>> __GFP_ZERO);
>>>>>>>>> + if (!pre_req->wb.m_page) {
>>>>>>>>> + for (j = 0; j < i; j++)
>>>>>>>>> +
>>>>>>>>> __free_page(hpb->pre_req[j].wb.m_page);
>>>>>>>>> +
>>>>>>>>> + goto release_mem;
>>>>>>>>> + }
>>>>>>>>> + list_add_tail(&pre_req->list_req,
>>>>>>>>> &hpb->lh_pre_req_free);
>>>>>>>>> + }
>>>>>>>>> +
>>>>>>>>> + return 0;
>>>>>>>>> +release_mem:
>>>>>>>>> + kfree(hpb->pre_req);
>>>>>>>>> + return -ENOMEM;
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>>
>>>
>
>
>

\
 
 \ /
  Last update: 2021-03-18 03:30    [W:0.090 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site