lkml.org 
[lkml]   [2021]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 1/3] dt-bindings: display: simple: Add the panel on sc7180-trogdor-pompom
On Tue, Mar 16, 2021 at 02:08:19PM -0700, Douglas Anderson wrote:
> The sc7180-trogdor-pompom board might be attached to any number of a
> pile of eDP panels. At the moment I'm told that the list might include:
> - KD KD116N21-30NV-A010
> - KD KD116N09-30NH-A016
> - Starry 2081116HHD028001-51D
> - Sharp LQ116M1JW10
>
> It should be noted that while the EDID programmed in the first 3
> panels indicates that they should run with exactly the same timing (to
> keep things simple), the 4th panel not only needs different timing but
> has a different resolution.
>
> As is true in general with eDP panels, we can figure out which panel
> we have and all the info needed to drive its pixel clock by reading
> the EDID. However, we can do this only after we've powered the panel
> on. Powering on the panels requires following the timing diagram in
> each panel's datasheet which specifies delays between certain
> actions. This means that, while we can be quite dynamic about handling
> things we can't just totally skip out on describing the panel like we
> could do if it was connected to an external-facing DP port.
>
> While the different panels have slightly different delays, it's
> possible to come up with a set of unified delays that will work on all
> the panels. From reading the datasheets:
> * KD KD116N21-30NV-A010 and KD KD116N09-30NH-A016
> - HPD absent delay: 200 ms
> - Unprepare delay: 150 ms (datasheet is confusing, might be 500 ms)
> * Starry 2081116HHD028001-51D
> - HPD absent delay: 100 ms
> - Enable delay: (link training done till enable BL): 200 ms
> - Unprepare delay: 500 ms
> * Sharp LQ116M1JW10
> - HPD absent delay: 200 ms
> - Unprepare delay: 500 ms
> - Prepare to enable delay (power on till backlight): 100 ms
>
> Unified:
> - HPD absent delay: 200 ms
> - Unprepare delay: 500 ms
> - Enable delay: 200 ms
>
> NOTE: in theory the only thing that we _really_ need unity on is the
> "HPD absent delay" since once the panel asserts HPD we can read the
> EDID and could make per-panel decisions if we wanted.
>
> Let's create a definition of "a panel that can be attached to pompom"
> as a panel that provides a valid EDID and can work with the standard
> pompom power sequencing. If more panels are later attached to pompom
> then it's fine as long as they work in a compatible way.
>
> One might ask why we can't just use a generic string here and provide
> the timings directly in the device tree file. As I understand it,
> trying to describe generic power sequencing in the device tree is
> frowned upon and the one instance (SD/MMC) is regarded as a mistake
> that shouldn't be repeated. Specifying a power sequence per board (or
> per board class) feels like a reasonable compromise. We're not trying
> to define fully generic power sequence bindings but we can also take
> advantage of the semi-probable properties of the attached device.
>
> NOTE: I believe that past instances of supporting this type of thing
> have used the "white lie" approach. One representative panel was
> listed in the device tree. The power sequencings of this
> representative panel were OK to use across all panels that might be
> attached and other differences were handled by EDID. This patch
> attempts to set a new precedent and avoid the need for the white lie.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---

Sounds reasonable to me if DT maintainers can live with this abstract
hardware definition. It's clearer than the 'white lie' approach.

It's then up to the vendor/manufacturer to ensure to only ship devices
with panels that have compatible timings.

> .../devicetree/bindings/display/panel/panel-simple.yaml | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index 62b0d54d87b7..9807dbc1cceb 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -140,6 +140,10 @@ properties:
> - giantplus,gpg48273qs5
> # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel
> - giantplus,gpm940b0
> + # A panel connected to a google,pompom board. Panel is guaranteed to
> + # confirm to google,pompom-panel power sequencing requirements and then

s/confirm/conform/ ?

> + # the specific panel will be probed via EDID.
> + - google,pompom-panel
> # HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
> - hannstar,hsd070pww1
> # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel

FWIW:

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

\
 
 \ /
  Last update: 2021-03-18 00:28    [W:0.121 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site