lkml.org 
[lkml]   [2021]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/1] PCI: pciehp: Skip DLLSC handling if DPC is triggered
Hi,

On Wed, Mar 17, 2021 at 9:31 AM Dan Williams <dan.j.williams@intel.com> wrote:
>
> On Tue, Mar 16, 2021 at 10:31 PM Lukas Wunner <lukas@wunner.de> wrote:
> >
> > On Tue, Mar 16, 2021 at 10:08:31PM -0700, Dan Williams wrote:
> > > On Tue, Mar 16, 2021 at 9:14 PM Lukas Wunner <lukas@wunner.de> wrote:
> > > >
> > > > On Fri, Mar 12, 2021 at 07:32:08PM -0800, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> > > > > + if ((events == PCI_EXP_SLTSTA_DLLSC) && is_dpc_reset_active(pdev)) {
> > > > > + ctrl_info(ctrl, "Slot(%s): DLLSC event(DPC), skipped\n",
> > > > > + slot_name(ctrl));
> > > > > + ret = IRQ_HANDLED;
> > > > > + goto out;
> > > > > + }
> > > >
> > > > Two problems here:
> > > >
> > > > (1) If recovery fails, the link will *remain* down, so there'll be
> > > > no Link Up event. You've filtered the Link Down event, thus the
> > > > slot will remain in ON_STATE even though the device in the slot is
> > > > no longer accessible. That's not good, the slot should be brought
> > > > down in this case.
> > >
> > > Can you elaborate on why that is "not good" from the end user
> > > perspective? From a driver perspective the device driver context is
> > > lost and the card needs servicing. The service event starts a new
> > > cycle of slot-attention being triggered and that syncs the slot-down
> > > state at that time.
> >
> > All of pciehp's code assumes that if the link is down, the slot must be
> > off. A slot which is in ON_STATE for a prolonged period of time even
> > though the link is down is an oddity the code doesn't account for.
> >
> > If the link goes down, the slot should be brought into OFF_STATE.
> > (It's okay though to delay bringdown until DPC recovery has completed
> > unsuccessfully, which is what the patch I'm proposing does.)
> >
> > I don't understand what you mean by "service event". Someone unplugging
> > and replugging the NVMe drive?
>
> Yes, service meaning a technician physically removes the card.
>
> >
> >
> > > > (2) If recovery succeeds, there's a race where pciehp may call
> > > > is_dpc_reset_active() *after* dpc_reset_link() has finished.
> > > > So both the DPC Trigger Status bit as well as pdev->dpc_reset_active
> > > > will be cleared. Thus, the Link Up event is not filtered by pciehp
> > > > and the slot is brought down and back up even though DPC recovery
> > > > was succesful, which seems undesirable.
> > >
> > > The hotplug driver never saw the Link Down, so what does it do when
> > > the slot transitions from Link Up to Link Up? Do you mean the Link
> > > Down might fire after the dpc recovery has completed if the hotplug
> > > notification was delayed?
> >
> > If the Link Down is filtered and the Link Up is not, pciehp will
> > bring down the slot and then bring it back up. That's because pciehp
> > can't really tell whether a DLLSC event is Link Up or Link Down.
> >
> > It just knows that the link was previously up, is now up again,
> > but must have been down intermittently, so transactions to the
> > device in the slot may have been lost and the slot is therefore
> > brought down for safety. Because the link is up, it is then
> > brought back up.
>
> I wonder why we're not seeing that effect in testing?

In our test case, there is a good chance that the LINK UP event is also
filtered. We change the dpc_reset_active status only after we verify
the link is up. So if hotplug handler handles the LINK UP event before
we change the status of dpc_reset_active, then it will not lead to the
issue mentioned by Lukas.

if (!pcie_wait_for_link(pdev, true)) {
pci_info(pdev, "Data Link Layer Link Active not set in
1000 msec\n");
- return PCI_ERS_RESULT_DISCONNECT;
+ status = PCI_ERS_RESULT_DISCONNECT;
}

- return PCI_ERS_RESULT_RECOVERED;
+ atomic_dec_return_release(&pdev->dpc_reset_active);

--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer

\
 
 \ /
  Last update: 2021-03-17 18:22    [W:0.967 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site