lkml.org 
[lkml]   [2021]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/5] soundwire: add static port map support
From
Date


On 3/15/21 11:56 AM, Srinivas Kandagatla wrote:
> In some cases, SoundWire device ports are statically mapped to Controller
> ports during design, however there is no way to expose this information
> to the controller. Controllers like Qualcomm ones use this info to setup
> static bandwidth parameters for those ports.
>
> A generic port allocation is not possible in this cases!
> This patch adds a new member m_port_map to SoundWire device so that
> it can populate the static master port map and share it with controller
> to be able to setup correct bandwidth parameters.
>
> As a user of this feature this patchset also adds new bindings for
> wsa881x smart speaker which has 4 ports which are statically mapped
> to the 3 output and 1 input port of the controller.
>
> Tested it on DB845c and SM8250 MTP.
>
> thanks,
> srini

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

> Changes since v3:
> - updated kernel doc for more clarity on m_port_map
>
> Srinivas Kandagatla (5):
> soundwire: add static port mapping support
> soundwire: qcom: update port map allocation bit mask
> soundwire: qcom: add static port map support
> ASoC: dt-bindings: wsa881x: add bindings for port mapping
> ASoC: codecs: wsa881x: add static port map support
>
> .../bindings/sound/qcom,wsa881x.yaml | 9 ++++++
> drivers/soundwire/qcom.c | 31 +++++++++++++++----
> include/linux/soundwire/sdw.h | 2 ++
> sound/soc/codecs/wsa881x.c | 7 +++++
> 4 files changed, 43 insertions(+), 6 deletions(-)
>

\
 
 \ /
  Last update: 2021-03-15 18:57    [W:0.072 / U:3.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site