lkml.org 
[lkml]   [2021]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] gpio: mpc8xxx: Add ACPI support
Am 2021-03-12 12:07, schrieb Bartosz Golaszewski:
> On Fri, Mar 12, 2021 at 7:51 AM Ran Wang <ran.wang_1@nxp.com> wrote:
>>
>> Current implementation only supports DT, now add ACPI support.
>>
>> Note that compared to device of 'fsl,qoriq-gpio', LS1028A and
>> LS1088A's GPIO have no extra programming, so simplify related
>> checking.
>>
>> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
>> ---
>> drivers/gpio/gpio-mpc8xxx.c | 50
>> +++++++++++++++++++++++++++----------
>> 1 file changed, 37 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
>> index 6dfca83bcd90..de5b7e17cde3 100644
>> --- a/drivers/gpio/gpio-mpc8xxx.c
>> +++ b/drivers/gpio/gpio-mpc8xxx.c
>> @@ -9,6 +9,7 @@
>> * kind, whether express or implied.
>> */
>>
>> +#include <linux/acpi.h>
>> #include <linux/kernel.h>
>> #include <linux/init.h>
>> #include <linux/spinlock.h>
>> @@ -292,8 +293,6 @@ static const struct of_device_id
>> mpc8xxx_gpio_ids[] = {
>> { .compatible = "fsl,mpc5121-gpio", .data =
>> &mpc512x_gpio_devtype, },
>> { .compatible = "fsl,mpc5125-gpio", .data =
>> &mpc5125_gpio_devtype, },
>> { .compatible = "fsl,pq3-gpio", },
>> - { .compatible = "fsl,ls1028a-gpio", },
>> - { .compatible = "fsl,ls1088a-gpio", },
>
> Why are you removing support for those?

I guess because it doesn't matter because usually
compatible = "fsl,ls1028a-gpio", "fsl,qoriq-gpio";
is used. But I just had a look at the dt binding and it doesn't
mandate it. So please keep it.

-michael

>
> Bart
>
>> { .compatible = "fsl,qoriq-gpio", },
>> {}
>> };
>> @@ -303,10 +302,19 @@ static int mpc8xxx_probe(struct platform_device
>> *pdev)
>> struct device_node *np = pdev->dev.of_node;
>> struct mpc8xxx_gpio_chip *mpc8xxx_gc;
>> struct gpio_chip *gc;
>> - const struct mpc8xxx_gpio_devtype *devtype =
>> - of_device_get_match_data(&pdev->dev);
>> + const struct mpc8xxx_gpio_devtype *devtype;
>> + const struct acpi_device_id *acpi_id;
>> int ret;
>>
>> + if (pdev->dev.of_node) {
>> + devtype = of_device_get_match_data(&pdev->dev);
>> + } else {
>> + acpi_id =
>> acpi_match_device(pdev->dev.driver->acpi_match_table,
>> + &pdev->dev);
>> + if (acpi_id)
>> + devtype = (struct mpc8xxx_gpio_devtype *)
>> acpi_id->driver_data;
>> + }
>> +
>> mpc8xxx_gc = devm_kzalloc(&pdev->dev, sizeof(*mpc8xxx_gc),
>> GFP_KERNEL);
>> if (!mpc8xxx_gc)
>> return -ENOMEM;
>> @@ -315,14 +323,14 @@ static int mpc8xxx_probe(struct platform_device
>> *pdev)
>>
>> raw_spin_lock_init(&mpc8xxx_gc->lock);
>>
>> - mpc8xxx_gc->regs = of_iomap(np, 0);
>> + mpc8xxx_gc->regs = devm_platform_ioremap_resource(pdev, 0);
>> if (!mpc8xxx_gc->regs)
>> return -ENOMEM;
>>
>> gc = &mpc8xxx_gc->gc;
>> gc->parent = &pdev->dev;
>>
>> - if (of_property_read_bool(np, "little-endian")) {
>> + if (device_property_read_bool(&pdev->dev, "little-endian")) {
>> ret = bgpio_init(gc, &pdev->dev, 4,
>> mpc8xxx_gc->regs + GPIO_DAT,
>> NULL, NULL,
>> @@ -369,10 +377,14 @@ static int mpc8xxx_probe(struct platform_device
>> *pdev)
>> * associated input enable must be set (GPIOxGPIE[IEn]=1) to
>> propagate
>> * the port value to the GPIO Data Register.
>> */
>> - if (of_device_is_compatible(np, "fsl,qoriq-gpio") ||
>> - of_device_is_compatible(np, "fsl,ls1028a-gpio") ||
>> - of_device_is_compatible(np, "fsl,ls1088a-gpio"))
>> - gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE,
>> 0xffffffff);
>> + if (pdev->dev.of_node) {
>> + if (of_device_is_compatible(np, "fsl,qoriq-gpio"))
>> + gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE,
>> 0xffffffff);
>> + } else {
>> + if
>> (acpi_match_device(pdev->dev.driver->acpi_match_table,
>> + &pdev->dev))
>> + gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE,
>> 0xffffffff);
>> + }
>>
>> ret = gpiochip_add_data(gc, mpc8xxx_gc);
>> if (ret) {
>> @@ -381,12 +393,15 @@ static int mpc8xxx_probe(struct platform_device
>> *pdev)
>> goto err;
>> }
>>
>> - mpc8xxx_gc->irqn = irq_of_parse_and_map(np, 0);
>> + mpc8xxx_gc->irqn = platform_get_irq(pdev, 0);
>> if (!mpc8xxx_gc->irqn)
>> return 0;
>>
>> - mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS,
>> - &mpc8xxx_gpio_irq_ops,
>> mpc8xxx_gc);
>> + mpc8xxx_gc->irq =
>> irq_domain_create_linear(dev_fwnode(&pdev->dev),
>> + MPC8XXX_GPIO_PINS,
>> +
>> &mpc8xxx_gpio_irq_ops,
>> + mpc8xxx_gc);
>> +
>> if (!mpc8xxx_gc->irq)
>> return 0;
>>
>> @@ -425,12 +440,21 @@ static int mpc8xxx_remove(struct platform_device
>> *pdev)
>> return 0;
>> }
>>
>> +#ifdef CONFIG_ACPI
>> +static const struct acpi_device_id gpio_acpi_ids[] = {
>> + {"NXP0031",},
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(acpi, gpio_acpi_ids);
>> +#endif
>> +
>> static struct platform_driver mpc8xxx_plat_driver = {
>> .probe = mpc8xxx_probe,
>> .remove = mpc8xxx_remove,
>> .driver = {
>> .name = "gpio-mpc8xxx",
>> .of_match_table = mpc8xxx_gpio_ids,
>> + .acpi_match_table = ACPI_PTR(gpio_acpi_ids),
>> },
>> };
>>
>> --
>> 2.25.1
>>

--
-michael

\
 
 \ /
  Last update: 2021-03-14 01:13    [W:0.165 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site