lkml.org 
[lkml]   [2021]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] ASoC: simple-card-utils: Fix device module clock
Am 2021-03-12 12:35, schrieb Mark Brown:
> On Thu, Mar 11, 2021 at 11:11:15PM +0100, Michael Walle wrote:
>> Am 2021-03-11 17:15, schrieb Mark Brown:
>
>> > The trick is figuring out if it's best to vary the input clock
>> > or to use the FLL to adapt a fixed input clock,
>
>> For simple-audio-card you can set the "clock" property if you want
>> that clock to be changed/enabled/disabled. But that doesn't seem to
>> be the way to go, at least it was NAKed by Rob for the
>> audio-graph-card.
>> I don't see a way to figure out if MCLK should be controlled by
>> simple-*-card without adding further properties to the device tree.
>
> If the card has a clock API clock as sysclk then set_sysclk(() should
> be configuring that clock.

What do you mean by "the card". The simple-audio-card itself?

Take a look at:
https://elixir.bootlin.com/linux/v5.12-rc2/source/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts#L29

Does the card has a clock? IMHO the WM8904 codec has a clock, but not
the audio card.

-michael

\
 
 \ /
  Last update: 2021-03-12 13:03    [W:0.191 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site