lkml.org 
[lkml]   [2021]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/7] ASoC: dt-bindings: wcd938x: add bindings for wcd938x
Date
Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire device RX and
TX respectively, supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
7 x TX diff inputs, 8 DMICs, MBHC.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
.../bindings/sound/qcom,wcd938x.yaml | 127 ++++++++++++++++++
1 file changed, 127 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
new file mode 100644
index 000000000000..81c8957145d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
+ It has RX and TX Soundwire slave devices.
+
+properties:
+ compatible:
+ const: sdw20217010d00
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO spec for reset line to use
+ maxItems: 1
+
+ direction:
+ oneOf:
+ - const: rx
+ - const: tx
+
+ vdd-buck-supply:
+ description: A reference to the 1.8V buck supply
+
+ vdd-rxtx-supply:
+ description: A reference to the 1.8V rx supply
+
+ vdd-io-supply:
+ description: A reference to the 1.8V I/O supply
+
+ qcom,micbias1-microvolt:
+ description: micbias1 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias2-microvolt:
+ description: micbias2 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias3-microvolt:
+ description: micbias3 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias4-microvolt:
+ description: micbias4 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,mbhc-hphl-switch:
+ description: Indicates that HPHL switch type is normally closed!
+ type: boolean
+
+ qcom,mbhc-ground-switch:
+ description: Indicates that Headset Gound switch type is normally closed!
+ type: boolean
+
+ qcom,mbhc-vthreshold:
+ description: |
+ Voltage threshold values for all the headset buttons
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 8
+ maxItems: 8
+
+ qcom,port-mapping:
+ description: |
+ Specifies static port mapping between slave and master ports.
+ In the order of slave port index.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 4
+ maxItems: 5
+
+ '#sound-dai-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - qcom,micbias1-microvolt
+ - qcom,micbias2-microvolt
+ - qcom,micbias3-microvolt
+ - qcom,micbias4-microvolt
+ - qcom,port-mapping
+ - qcom,mbhc-hphl-switch
+ - qcom,mbhc-ground-switch
+ - qcom,mbhc-vthreshold
+ - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ soundwire@3230000 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x03230000 0x2000>;
+
+ codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ reset-gpios = <&tlmm 32 0>;
+ direction = "tx";
+ #sound-dai-cells = <1>;
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-hphl-switch;
+ qcom,mbhc-ground-switch;
+ qcom,mbhc-vthreshold = <75 150 237 500 500 500 500 500>;
+ qcom,port-mapping = <2 3 4 5>;
+ };
+ };
+
+...
--
2.21.0
\
 
 \ /
  Last update: 2021-03-11 18:36    [W:0.091 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site