lkml.org 
[lkml]   [2021]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Linux-stm32] [PATCH v2 00/14] Introduce STM32MP1 RCC in secured mode
From
Date
Hello,

On 11.03.21 15:02, Alexandre TORGUE wrote:
> On 3/11/21 12:43 PM, Marek Vasut wrote:
>> On 3/11/21 9:08 AM, Alexandre TORGUE wrote:
>>> 1- Break the current ABI: as soon as those patches are merged, stm32mp157c-dk2.dtb will impose to use
>>> A tf-a for scmi clocks. For people using u-boot spl, the will have to create their own "no-secure" devicetree.
>>
>> NAK, this breaks existing boards and existing setups, e.g. DK2 that does not use ATF.
>>
>>> 2-As you suggest, create a new "secure" dtb per boards (Not my wish for maintenance perspectives).
>>
>> I agree with Alex (G) that the "secure" option should be opt-in.
>> That way existing setups remain working and no extra requirements are imposed on MP1 users. Esp. since as far as I understand this, the "secure" part isn't really about security, but rather about moving clock configuration from Linux to some firmware blob.
>>
>>> 3- Keep kernel device tree as they are and applied this secure layer (scmi clocks phandle) thanks to dtbo in
>>> U-boot.
>>
>> Is this really better than
>> #include "stm32mp15xx-enable-secure-stuff.dtsi"
>> in a board DT ? Because that is how I imagine the opt-in "secure" option could work.
>>
>
> Discussing with Patrick about u-boot, we could use dtbo application thanks to extlinux.conf. BUT it it will not prevent other case (i.e. TF-A which jump directly in kernel@). So the "least worst" solution is to create a new "stm32mp1257c-scmi-dk2 board which will overload clock entries with a scmi phandle (as proposed by Alex).

I raised this issue before with your colleagues. I still believe the correct way
would be for the TF-A to pass down either a device tree or an overlay with the
actual settings in use, e.g.:

- Clocks/Resets done via SCMI
- Reserved memory regions

If TF-A directly boots Linux, it can apply the overlay itself, otherwise it's
passed down to SSBL that applies it before booting Linux.

Cheers,
Ahmad

>
> Gabriel, can you wait a bit before sending something about SCMI in dtsi, I would like to align this strategy internally.
>
> Marek, Alex: thanks for your inputs.
>
> Regards
> Alex
>
>>> The third could be the less costly.
>>
>> [...]
> _______________________________________________
> Linux-stm32 mailing list
> Linux-stm32@st-md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/linux-stm32

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2021-03-11 15:43    [W:0.107 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site