lkml.org 
[lkml]   [2021]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH -tip 0/5] kprobes: Fix stacktrace in kretprobes
On Thu, 11 Mar 2021 10:51:10 -0600
Josh Poimboeuf <jpoimboe@redhat.com> wrote:

> On Thu, Mar 11, 2021 at 10:54:38AM +0900, Masami Hiramatsu wrote:
> > On Wed, 10 Mar 2021 19:06:15 -0600
> > Josh Poimboeuf <jpoimboe@redhat.com> wrote:
> >
> > > On Thu, Mar 11, 2021 at 09:20:18AM +0900, Masami Hiramatsu wrote:
> > > > > > bool unwind_next_frame(struct unwind_state *state)
> > > > > > {
> > > > > > unsigned long ip_p, sp, tmp, orig_ip = state->ip, prev_sp = state->sp;
> > > > > > @@ -536,6 +561,18 @@ bool unwind_next_frame(struct unwind_state *state)
> > > > > >
> > > > > > state->ip = ftrace_graph_ret_addr(state->task, &state->graph_idx,
> > > > > > state->ip, (void *)ip_p);
> > > > > > + /*
> > > > > > + * There are special cases when the stack unwinder is called
> > > > > > + * from the kretprobe handler or the interrupt handler which
> > > > > > + * occurs in the kretprobe trampoline code. In those cases,
> > > > > > + * %sp is shown on the stack instead of the return address.
> > > > > > + * Or, when the unwinder find the return address is replaced
> > > > > > + * by kretprobe_trampoline.
> > > > > > + * In those cases, correct address can be found in kretprobe.
> > > > > > + */
> > > > > > + if (state->ip == sp ||
> > > > >
> > > > > Why is the 'state->ip == sp' needed?
> > > >
> > > > As I commented above, until kretprobe_trampoline writes back the real
> > > > address to the stack, sp value is there (which has been pushed by the
> > > > 'pushq %rsp' at the entry of kretprobe_trampoline.)
> > > >
> > > > ".type kretprobe_trampoline, @function\n"
> > > > "kretprobe_trampoline:\n"
> > > > /* We don't bother saving the ss register */
> > > > " pushq %rsp\n" // THIS
> > > > " pushfq\n"
> > > >
> > > > Thus, from inside the kretprobe handler, like ftrace, you'll see
> > > > the sp value instead of the real return address.
> > >
> > > I see. If you change is_kretprobe_trampoline_address() to include the
> > > entire function, like:
> > >
> > > static bool is_kretprobe_trampoline_address(unsigned long ip)
> > > {
> > > return (void *)ip >= kretprobe_trampoline &&
> > > (void *)ip < kretprobe_trampoline_end;
> > > }
> > >
> > > then the unwinder won't ever read the bogus %rsp value into state->ip,
> > > and the 'state->ip == sp' check can be removed.
> >
> > Hmm, I couldn't get your point. Since sp is the address of stack,
> > it always out of text address.
>
> When unwinding from trampoline_handler(), state->ip will point to the
> instruction after the call:
>
> call trampoline_handler
> movq %rax, 19*8(%rsp) <-- state->ip points to this insn
>
> But then, the above version of is_kretprobe_trampoline_address() is
> true, so state->ip gets immediately replaced with the real return
> address:
>
> if (is_kretprobe_trampoline_address(state->ip))
> state->ip = orc_kretprobe_correct_ip(state);

Hmm, but that ip is for the "next" frame, isn't it?

[stack]
0x040 kretprobe_trampoline+0x25 -+
0x048 r15 |
... /* pt_regs */ +- ORC sp_offset at the kretprobe_trampoline+0x24
0x0d8 flags -+
0x0e0 rsp (=0x0e0) /* will be replaced by the real return address */

Your idea seems replacing stack@0x040 with the real return address.
In that case, may orc_find() returns the wrong ORC info?


> so the unwinder skips over the kretprobe_trampoline() frame and goes
> straight to the frame of the real return address. Thus it never reads
> this bogus return value into state->ip:
>
> pushq %rsp
>
> which is why the weird 'state->ip == sp' check is no longer needed.

But that is what the kretprobe_trampoline actually does. I would rather
like to see the real information from stacktrace.

> The only "downside" is that the unwinder skips the
> kretprobe_trampoline() frame. (note that downside wouldn't exist in
> the case of UNWIND_HINT_REGS + valid regs->ip).

As I said, I would like to see the kretprobe_trampoline+0x25 on
my stacktrace, because kretprobe doesn't replace the kretprobe_trampoline
but the target_func on the stack.

> > > > > And it would make the unwinder just work automatically when unwinding
> > > > > from the handler using the regs.
> > > > >
> > > > > It would also work when unwinding from the handler's stack, if we put an
> > > > > UNWIND_HINT_REGS after saving the regs.
> > > >
> > > > At that moment, the real return address is not identified. So we can not
> > > > put it.
> > >
> > > True, at the time the regs are originally saved, the real return address
> > > isn't available. But by the time the user handler is called, the return
> > > address *is* available. So if the real return address were placed in
> > > regs->ip before calling the handler, the unwinder could find it there,
> > > when called from the handler.
> >
> > OK, but this is not arch independent specification. I can make a hack
> > only for x86, but that is not clean implementation, hmm.
> >
> > >
> > > Then we wouldn't need the call to orc_kretprobe_correct_ip() in
> > > __unwind_start().
> >
> > What about the ORC implementation in other architecture? Is that for
> > x86 only?
>
> ORC is x86 only.
>
> > > But maybe it's not possible due to the regs->ip expectations of legacy
> > > handlers?
> >
> > Usually, the legacy handlers will ignore it, the official way to access
> > the correct return address is kretprobe_instance.ret_addr. Because it is
> > arch independent.
> >
> > Nowadays there are instruction_pointer() and instruction_pointer_set() APIs
> > in many (not all) architecutre, so I can try to replace to use it instead
> > of the kretprobe_instance.ret_addr.
> > (and it will break the out-of-tree codes)
>
> That sounds better to me, though I don't have an understanding of what
> it would break.

OK, anyway try to do that and see what happen.

Thank you,

--
Masami Hiramatsu <mhiramat@kernel.org>

\
 
 \ /
  Last update: 2021-03-12 04:24    [W:1.465 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site