lkml.org 
[lkml]   [2021]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] dt-bindings: soc: qcom: wcnss: Add firmware-name property
Date
The WCNSS needs firmware which differs between platforms, and possibly
boards. Add a new property "firmware-name" to allow the DT to specify
the platform/board specific path to this firmware file.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
index 042a2e4159bd..1382b64e1381 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
@@ -24,6 +24,13 @@ block and a BT, WiFi and FM radio block, all using SMD as command channels.
"qcom,riva",
"qcom,pronto"

+- firmware-name:
+ Usage: optional
+ Value type: <string>
+ Definition: specifies the relative firmware image path for the WLAN NV
+ blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if
+ not specified.
+
= SUBNODES
The subnodes of the wcnss node are optional and describe the individual blocks in
the WCNSS.
--
2.29.2
\
 
 \ /
  Last update: 2021-03-12 01:33    [W:0.216 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site