lkml.org 
[lkml]   [2021]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v6 00/10] libperf and arm64 userspace counter access support
    Date
    Hi all,

    Another version of libperf and arm64 userspace counter access support.
    This originally resurrected Raphael's series[1] to enable userspace counter
    access on arm64. My previous versions are here[2][3][4][5][6]. A git
    branch is here[7].

    Changes in v6:
    - Reworking of the handling of 64-bit counters and user access. There's
    a new config1 flag to request user access. This takes priority over
    the 64-bit flag and the user will get the maximum size the h/w
    supports without chaining.
    - The libperf evsel mmap struct is stored in its own xyarray
    - New tests for user 64-bit and 32-bit counters
    - Rebase to v5.12-rc2

    Changes in v5:
    - Limit enabling/disabling access to CPUs associated with the PMU
    (supported_cpus) and with the mm_struct matching current->active_mm.
    The x86 method of using mm_cpumask doesn't work for arm64 as it is not
    updated.
    - Only set cap_user_rdpmc if event is on current cpu. See patch 2.
    - Create an mmap for every event in an evsel. This results in some changes
    to the libperf mmap API from the last version.
    - Rebase to v5.11-rc2

    Changes in v4:
    - Dropped 'arm64: pmu: Add hook to handle pmu-related undefined instructions'.
    The onus is on userspace to pin itself to a homogeneous subset of CPUs
    and avoid any aborts on heterogeneous systems, so the hook is not needed.
    - Make perf_evsel__mmap() take pages rather than bytes for size
    - Fix building arm64 heterogeneous test.

    Changes in v3:
    - Dropped removing x86 rdpmc test until libperf tests can run via 'perf test'
    - Added verbose prints for tests
    - Split adding perf_evsel__mmap() to separate patch

    The following changes to the arm64 support have been made compared to
    Raphael's last version:

    The major change is support for heterogeneous systems with some
    restrictions. Specifically, userspace must pin itself to like CPUs, open
    a specific PMU by type, and use h/w specific events. The tests have been
    reworked to demonstrate this.

    Chained events are not supported. The problem with supporting chained
    events was there's no way to distinguish between a chained event and a
    native 64-bit counter. We could add some flag, but do self monitoring
    processes really need that? Native 64-bit counters are supported if the
    PMU h/w has support. As there's already an explicit ABI to request 64-bit
    counters, userspace can request 64-bit counters and if user
    access is not enabled, then it must retry with 32-bit counters.

    Prior versions broke the build on arm32 (surprisingly never caught by
    0-day). As a result, event_mapped and event_unmapped implementations have
    been moved into the arm64 code.

    There was a bug in that pmc_width was not set in the user page. The tests
    now check for this.

    The documentation has been converted to rST. I've added sections on
    chained events and heterogeneous.

    The tests have been expanded to test the cycle counter access.

    Rob

    [1] https://lore.kernel.org/r/20190822144220.27860-1-raphael.gault@arm.com/
    [2] https://lore.kernel.org/r/20200707205333.624938-1-robh@kernel.org/
    [3] https://lore.kernel.org/r/20200828205614.3391252-1-robh@kernel.org/
    [4] https://lore.kernel.org/r/20200911215118.2887710-1-robh@kernel.org/
    [5] https://lore.kernel.org/r/20201001140116.651970-1-robh@kernel.org/
    [6] https://lore.kernel.org/r/20210114020605.3943992-1-robh@kernel.org/
    [7] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git user-perf-event-v6

    Raphael Gault (3):
    arm64: pmu: Add function implementation to update event index in
    userpage
    arm64: perf: Enable PMU counter direct access for perf event
    Documentation: arm64: Document PMU counters access from userspace

    Rob Herring (7):
    tools/include: Add an initial math64.h
    libperf: Add evsel mmap support
    libperf: tests: Add support for verbose printing
    libperf: Add support for user space counter access
    libperf: Add arm64 support to perf_mmap__read_self()
    perf: arm64: Add test for userspace counter access on heterogeneous
    systems
    perf: arm64: Add tests for 32-bit and 64-bit counter size userspace
    access

    Documentation/arm64/index.rst | 1 +
    .../arm64/perf_counter_user_access.rst | 60 +++++
    arch/arm64/include/asm/mmu.h | 5 +
    arch/arm64/include/asm/mmu_context.h | 2 +
    arch/arm64/include/asm/perf_event.h | 14 ++
    arch/arm64/kernel/perf_event.c | 104 ++++++++-
    include/linux/perf/arm_pmu.h | 2 +
    tools/include/linux/math64.h | 75 ++++++
    tools/lib/perf/Documentation/libperf.txt | 2 +
    tools/lib/perf/evsel.c | 55 +++++
    tools/lib/perf/include/internal/evsel.h | 1 +
    tools/lib/perf/include/internal/mmap.h | 3 +
    tools/lib/perf/include/internal/tests.h | 32 +++
    tools/lib/perf/include/perf/evsel.h | 2 +
    tools/lib/perf/libperf.map | 2 +
    tools/lib/perf/mmap.c | 186 +++++++++++++++
    tools/lib/perf/tests/Makefile | 6 +-
    tools/lib/perf/tests/test-evsel.c | 65 ++++++
    tools/perf/arch/arm64/include/arch-tests.h | 12 +
    tools/perf/arch/arm64/tests/Build | 1 +
    tools/perf/arch/arm64/tests/arch-tests.c | 12 +
    tools/perf/arch/arm64/tests/user-events.c | 215 ++++++++++++++++++
    22 files changed, 852 insertions(+), 5 deletions(-)
    create mode 100644 Documentation/arm64/perf_counter_user_access.rst
    create mode 100644 tools/include/linux/math64.h
    create mode 100644 tools/perf/arch/arm64/tests/user-events.c

    --
    2.27.0

    \
     
     \ /
      Last update: 2021-03-11 01:10    [W:4.482 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site