Messages in this thread Patch in this message | | | From | Rafał Miłecki <> | Subject | [PATCH 2/3] dt-bindings: phy: brcm,ns-usb2-phy: bind single CRU reg | Date | Fri, 26 Feb 2021 12:45:00 +0100 |
| |
From: Rafał Miłecki <rafal@milecki.pl>
The old binding was using whole DMU space. It was an overkill. DMU is a big block which contains e.g. CRU which contains e.g. PLLs, PHY, pinctrl and thermal blocks.
Rework the binding to directly use a single CRU register that controls USB 2.0 PHY. It's still required to reference CRU generic clkset register so add a syscon for that.
For a full DMU & CRU description see arch/arm/boot/dts/bcm5301x.dtsi .
The old binding is deprecated now.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- This has been verified using dt_binding_check
I'd really like to get Rob's ack to make sure I don't do anything stupid
It's a reworked version of my abonded 2019 patch: [PATCH V2 1/2] dt-bindings: bcm-ns-usb2-phy: rework binding to use CRU syscon https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20190108123907.19816-1-zajec5@gmail.com/ --- .../bindings/phy/brcm,ns-usb2-phy.yaml | 46 +++++++++++++++---- 1 file changed, 36 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml index b8b683ce8fa9..8e056d4d205a 100644 --- a/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,ns-usb2-phy.yaml @@ -16,11 +16,20 @@ properties: const: brcm,ns-usb2-phy reg: - maxItems: 1 - description: DMU (Device Management Unit) address range + anyOf: + - maxItems: 1 + description: PHY control register + - maxItems: 1 + description: DMU (Device Management Unit) address range + deprecated: true reg-names: const: dmu + deprecated: true + + brcm,syscon-clkset: + description: phandle to syscon for clkset register + $ref: /schemas/types.yaml#/definitions/phandle clocks: maxItems: 1 @@ -34,22 +43,39 @@ properties: required: - reg - - reg-names - clocks - clock-names - "#phy-cells" +oneOf: + - required: + - brcm,syscon-clkset + - required: + - reg-names + additionalProperties: false examples: - | #include <dt-bindings/clock/bcm-nsp.h> - usb2-phy@1800c000 { - compatible = "brcm,ns-usb2-phy"; - reg = <0x1800c000 0x1000>; - reg-names = "dmu"; - clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; - clock-names = "phy-ref-clk"; - #phy-cells = <0>; + cru-bus@1800c100 { + compatible = "simple-bus"; + ranges = <0 0x1800c100 0x1a4>; + #address-cells = <1>; + #size-cells = <1>; + + usb2-phy@64 { + compatible = "brcm,ns-usb2-phy"; + reg = <0x64 0x4>; + brcm,syscon-clkset = <&clkset>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + #phy-cells = <0>; + }; + + clkset: syscon@80 { + compatible = "brcm,cru-clkset", "syscon"; + reg = <0x80 0x4>; + }; }; -- 2.26.2
| |