lkml.org 
[lkml]   [2021]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 2/3] dt-bindings: usb: generic-ehci: document spurious-oc flag
Date
I didn’t change this, but I missed Alan’s Acked-by, so:
Acked-by: Alan Stern <stern@rowland.harvard.edu>

> El 23 feb 2021, a las 18:44, Álvaro Fernández Rojas <noltari@gmail.com> escribió:
>
> Over-current reporting isn't supported on some platforms such as bcm63xx.
> These devices will incorrectly report over-current if this flag isn't properly
> activated.
>
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
> v3: no changes.
> v2: change flag name and improve documentation as suggested by Alan Stern.
>
> Documentation/devicetree/bindings/usb/generic-ehci.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
> index cf83f2d9afac..8089dc956ba3 100644
> --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
> +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
> @@ -122,6 +122,12 @@ properties:
> description:
> Set this flag to force EHCI reset after resume.
>
> + spurious-oc:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Set this flag to indicate that the hardware sometimes turns on
> + the OC bit when an over-current isn't actually present.
> +
> companion:
> $ref: /schemas/types.yaml#/definitions/phandle
> description:
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2021-02-24 08:23    [W:3.189 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site