lkml.org 
[lkml]   [2021]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/2] Input: add MStar MSG2638 touchscreen driver
Hi Vincent,

On Wed, Feb 10, 2021 at 06:33:52PM +0100, Vincent Knecht wrote:
> +
> + for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) {
> + p = &touch_event.pkt[i];
> + /* Ignore non-pressed finger data */
> + if (p->xy_hi == 0xFF && p->x_low == 0xFF && p->y_low == 0xFF)
> + continue;
> +
> + coord.x = (((p->xy_hi & 0xF0) << 4) | p->x_low) * msg2638->prop.max_x / TPD_WIDTH;
> + coord.y = (((p->xy_hi & 0x0F) << 8) | p->y_low) * msg2638->prop.max_y / TPD_HEIGHT;
> + msg2638_report_finger(msg2638, i, &coord);

We do not scale the coordinates in the kernel. Rather we provide
resolution, if known, and min/max coordinates reported by the hardware,
and let userspace handle the rest.

> +static int __maybe_unused msg2638_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct msg2638_ts_data *msg2638 = i2c_get_clientdata(client);
> +
> + mutex_lock(&msg2638->input_dev->mutex);
> +
> + if (input_device_enabled(msg2638->input_dev))
> + msg2638_stop(msg2638);

I believe that you should power down the device only if it is not
configures as wakeup source. In fact (and I think most drivers are
wrong in this), you may want to power up the device if it is a wakeup
source and it does not have any users.

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2021-02-21 00:33    [W:0.048 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site