lkml.org 
[lkml]   [2021]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] hwrng: bcm2835: set quality to 1000
From
Date
Hi Andrew,

I ran rngtest and this is what I got:
root@OpenWrt:/# cat /dev/hwrng | rngtest -c 1000
rngtest 6.10
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is
NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 996
rngtest: FIPS 140-2 failures: 4
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 3
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=146.002; avg=349.394;
max=1302083.333)Kibits/s
rngtest: FIPS tests speed: (min=12.126; avg=22.750; max=23.432)Mibits/s
rngtest: Program run time: 56826982 microseconds

996 successes and 4 failures -> 99.6% success rate
1024 * 99.6% = 1019 (rounded down to 1000)

I'm not sure if I can rely on rngtest for that...

Best regards,
Álvaro.

El 20/02/2021 a las 20:09, Andrew Lunn escribió:
> On Sat, Feb 20, 2021 at 06:47:40PM +0100, Álvaro Fernández Rojas wrote:
>> This allows devices without a high precission timer to reduce boot from >100s
>> to <30s.
>> diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
>> index 1a7c43b43c6b..4b48cb7176b0 100644
>> --- a/drivers/char/hw_random/bcm2835-rng.c
>> +++ b/drivers/char/hw_random/bcm2835-rng.c
>> @@ -163,6 +163,7 @@ static int bcm2835_rng_probe(struct platform_device *pdev)
>> priv->rng.init = bcm2835_rng_init;
>> priv->rng.read = bcm2835_rng_read;
>> priv->rng.cleanup = bcm2835_rng_cleanup;
>> + priv->rng.quality = 1000;
>
> Hi Alvero
>
> * @quality: Estimation of true entropy in RNG's bitstream
> * (in bits of entropy per 1024 bits of input;
> * valid values: 1 to 1024, or 0 for unknown).
>
> How did you determine this device produces 1000 bits of true entropy
> per 1024?
>
> Andrew
>

\
 
 \ /
  Last update: 2021-02-20 20:15    [W:0.073 / U:0.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site