lkml.org 
[lkml]   [2021]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch v3 net-next 6/7] octeontx2-pf: ethtool physical link status
Hariprasad Kelam wrote:

> From: Christina Jacob <cjacob@marvell.com>
>
> Register get_link_ksettings callback to get link status information
> from the driver. As virtual function (vf) shares same physical link
> same API is used for both the drivers and for loop back drivers
> simply returns the fixed values as its does not have physical link.
>
> ethtool eth3
> Settings for eth3:
> Supported ports: [ ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> 10000baseKR/Full
> 1000baseX/Full
> Supports auto-negotiation: No
> Supported FEC modes: BaseR RS
> Advertised link modes: Not reported
> Advertised pause frame use: No
> Advertised auto-negotiation: No
> Advertised FEC modes: None
>
> ethtool lbk0
> Settings for lbk0:
> Speed: 100000Mb/s
> Duplex: Full
>
> Signed-off-by: Christina Jacob <cjacob@marvell.com>
> Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>

besides the slightly long lines, looks good.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

\
 
 \ /
  Last update: 2021-02-03 01:47    [W:0.238 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site