lkml.org 
[lkml]   [2021]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 17/18] dt-bindings: media: nxp,imx8mq-vpu: Update bindings
From
Date

Le 17/02/2021 à 23:48, Rob Herring a écrit :
> On Wed, Feb 17, 2021 at 09:03:05AM +0100, Benjamin Gaignard wrote:
>> The introduction on HEVC decoder lead to update the bindings
>> to support it.
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
>> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
>> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
>> ---
>> .../bindings/media/nxp,imx8mq-vpu.yaml | 54 ++++++++++++-------
>> 1 file changed, 36 insertions(+), 18 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
>> index 762be3f96ce9..468435c70eef 100644
>> --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
>> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
>> @@ -15,24 +15,25 @@ description:
>>
>> properties:
>> compatible:
>> - const: nxp,imx8mq-vpu
>> + enum:
>> + - nxp,imx8mq-vpu
>> + - nxp,imx8mq-vpu-g2
>>
>> reg:
>> - maxItems: 3
>> + maxItems: 1
>>
>> reg-names:
>> - items:
>> - - const: g1
>> - - const: g2
>> - - const: ctrl
>> + enum:
>> + - g1
>> + - g2
> This isn't a compatible change. You need to state why that's okay if it
> is okay.

I will change the commit message to this in the next version:
The current bindings seem to make the assumption that the
two VPUs hardware blocks (G1 and G2) are only one set of
registers.
After implementing the VPU reset driver and G2 decoder driver
it shows that all the VPUs are independent and don't need to
know about the registers of the other blocks.
Remove from the bindings the need to set all blocks register
but keep reg-names property because removing it from the driver
may affect other variants.

Benjamin

>
>>
>> interrupts:
>> - maxItems: 2
>> + maxItems: 1
>>
>> interrupt-names:
>> - items:
>> - - const: g1
>> - - const: g2
>> + enum:
>> + - g1
>> + - g2
>>
>> clocks:
>> maxItems: 3
>> @@ -46,6 +47,9 @@ properties:
>> power-domains:
>> maxItems: 1
>>
>> + resets:
>> + maxItems: 1
>> +
>> required:
>> - compatible
>> - reg
>> @@ -54,6 +58,7 @@ required:
>> - interrupt-names
>> - clocks
>> - clock-names
>> + - resets
>>
>> additionalProperties: false
>>
>> @@ -61,19 +66,32 @@ examples:
>> - |
>> #include <dt-bindings/clock/imx8mq-clock.h>
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + #include <dt-bindings/reset/imx8mq-vpu-reset.h>
>>
>> - vpu: video-codec@38300000 {
>> + vpu_g1: video-codec@38300000 {
>> compatible = "nxp,imx8mq-vpu";
>> - reg = <0x38300000 0x10000>,
>> - <0x38310000 0x10000>,
>> - <0x38320000 0x10000>;
>> - reg-names = "g1", "g2", "ctrl";
>> - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
>> - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>> - interrupt-names = "g1", "g2";
>> + reg = <0x38300000 0x10000>;
>> + reg-names = "g1";
>> + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "g1";
>> + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
>> + <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
>> + <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
>> + clock-names = "g1", "g2", "bus";
>> + power-domains = <&pgc_vpu>;
>> + resets = <&vpu_reset IMX8MQ_RESET_VPU_RESET_G1>;
>> + };
>> +
>> + vpu_g2: video-codec@38310000 {
>> + compatible = "nxp,imx8mq-vpu-g2";
>> + reg = <0x38310000 0x10000>;
>> + reg-names = "g2";
>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "g2";
>> clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
>> <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
>> <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
>> clock-names = "g1", "g2", "bus";
>> power-domains = <&pgc_vpu>;
>> + resets = <&vpu_reset IMX8MQ_RESET_VPU_RESET_G2>;
>> };
>> --
>> 2.25.1
>>

\
 
 \ /
  Last update: 2021-02-18 18:36    [W:0.276 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site