lkml.org 
[lkml]   [2021]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: quirk for preventing bus reset on TI C667X
On Thu, Jan 21, 2021 at 05:55:47PM -0600, Bjorn Helgaas wrote:
> On Tue, Jan 12, 2021 at 03:36:43PM +0000, Antti Järvinen wrote:
> > TI C667X does not support bus/hot reset.
> > See https://e2e.ti.com/support/processors/f/791/t/954382
>
> You can cite the URL as the source, but the URL will eventually become
> stale, so let's include the relevant details here directly.

Thanks for trying the experiment below. I'll look for a repost that
includes details from the URL directly in the commit log.

> From the forum, it looks like the device doesn't respond after a
> reset (config accesses return ~0). It seems somewhat surprising that
> something as basic as a reset would be completely broken. I wonder if
> we're not doing the reset correctly.
>
> It looks like we would probably be trying a Secondary Bus Reset using
> the bridge leading to the C667X. Can you confirm? Wonder if you
> could try doing what pci_reset_secondary_bus() does by hand:
>
> # BRIDGE=... # PCI address, e.g., 00:1c.0
> # C667X=...
> # setpci -s$C667X VENDOR_ID.w
> # setpci -s$BRIDGE BRIDGE_CONTROL.w # prints "val"
> # setpci -s$BRIDGE BRIDGE_CONTROL.w= # val | 0x40 (set SBR)
> # sleep 1
> # setpci -s$BRIDGE BRIDGE_CONTROL.w= # val (clear SBR)
> # sleep 1
> # setpci -s$C667X VENDOR_ID.w=0
> # setpci -s$C667X VENDOR_ID.w
>
> If we use this quirk and avoid the reset, I assume that means
> assigning the device to VMs with VFIO will leak state between VMs?
>
> > Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com>
> > ---
> > drivers/pci/quirks.c | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > index 653660e3ba9e..c8fcf24c5bd0 100644
> > --- a/drivers/pci/quirks.c
> > +++ b/drivers/pci/quirks.c
> > @@ -3578,6 +3578,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0034, quirk_no_bus_reset);
> > */
> > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset);
> >
> > +/*
> > + * Some TI keystone C667X devices do no support bus/hot reset.
> > + * https://e2e.ti.com/support/processors/f/791/t/954382
> > + */
> > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0xb005, quirk_no_bus_reset);
> > +
> > static void quirk_no_pm_reset(struct pci_dev *dev)
> > {
> > /*
> > --
> > 2.17.1
> >

\
 
 \ /
  Last update: 2021-02-17 22:21    [W:0.122 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site