lkml.org 
[lkml]   [2021]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] cpufreq: exclude boost frequencies from valid count if not enabled
From
Date


On 2/17/21 12:50 AM, Viresh Kumar wrote:
> Hi Thara,
>
> On 16-02-21, 19:00, Thara Gopinath wrote:
>> This is a fix for a regression observed on db845 platforms with 5.7-rc11
>> kernel. On these platforms running stress tests with 5.11-rc7 kernel
>> causes big cpus to overheat and ultimately shutdown the system due to
>> hitting critical temperature (thermal throttling does not happen and
>> cur_state of cpufreq cooling device for big cpus remain stuck at 0 or max
>> frequency).
>>
>> This platform has boost opp defined for big cpus but boost mode itself is
>> disabled in the cpufreq driver. Hence the initial max frequency request
>> from cpufreq cooling device(cur_state) for big cpus is for boost
>> frequency(2803200) where as initial max frequency request from cpufreq
>> driver itself is for the highest non boost frequency (2649600).
>
> Okay.
>
>> qos
>> framework collates these two requests and puts the max frequency of big
>> cpus to 2649600 which the thermal framework is unaware of.
>
> It doesn't need to be aware of that. It sets its max frequency and other
> frameworks can put their own requests and the lowest one wins. In this case the
> other constraint came from cpufreq-core, which is fine.

Yes. the qos behavior is correct here.

>
>> Now during an
>> over heat event, with step-wise policy governor, thermal framework tries to
>> throttle the cpu and places a restriction on max frequency of the cpu to
>> cur_state - 1
>
> Actually it is cur_state + 1 as the values are inversed here, cooling state 0
> refers to highest frequency :)

yes. it does indeed!

>
>> which in this case 2649600. qos framework in turn tells the
>> cpufreq cooling device that max frequency of the cpu is already at 2649600
>> and the cooling device driver returns doing nothing(cur_state of the
>> cooling device remains unchanged).
>
> And that's where the bug lies, I have sent proper fix for that now.

Like I mention below there are multiple possible fixes for this issue!
More on mismatch of frequencies below.
>
>> Thus thermal remains stuck in a loop and
>> never manages to actually throttle the cpu frequency. This ultimately leads
>> to system shutdown in case of a thermal overheat event on big cpus.
>
>> There are multiple possible fixes for this issue. Fundamentally,it is wrong
>> for cpufreq driver and cpufreq cooling device driver to show different
>> maximum possible state/frequency for a cpu.
>
> Not actually, cpufreq core changes the max supported frequency at runtime based
> on the availability of boost frequencies.

First of all, I am still unable to find this setting in the sysfs space.
Irrespective the ideal behavior here will be to change the cpufreq
cooling dev max state when this happens. I say this for two reasons
1. The cooling device max state will reflect the correct highest
frequency as reported by cpufreq core. These are interfaces exposed to
user space and they should not be showing two different things.
2. More importantly, thermal will not waste valuable cycles attempting
to throttle down from an non-existing high frequency. In the case of
sdm845 we have only one boost opp in the opp table and hence the first
time thermal tries to throttle via the cpufreq cooling device(with the
step policy governor), it will return back saying that the state is
already achieved and then will retry again because overheating has not
stopped. But let us a platform has 5 such opps in the table and boost
mode not enabled. cpufreq cooling device will have to attempt 5 times
before any actual cooling action happens.

>
> cpufreq_table_count_valid_entries() is used at different places and it is
> implemented correctly.

It is used in one other place which is for statistics count. Boost
statistics need not be considered if boost mode is not enabled. And like
I mentioned before as in the case of cpufreq cooling device correct
behavior will be to reflect this as and when boost is enabled. But then
again for statistics purpose it is not much of an issue if the entry
itself is present with the count showing 0 if boost modes are not
enabled. In this case, we should have another api or cpufreq cooling
device not use cpufreq_table_count_valid_entries to get the max state.

>

--
Warm Regards
Thara

\
 
 \ /
  Last update: 2021-02-17 16:36    [W:0.110 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site