lkml.org 
[lkml]   [2021]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 3/5] net: stmmac: dwmac-sun8i: Use reset_control_reset
Date
Use the appropriate function instead of reimplementing it,
and update the error message to match the code.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 3c3d0b99d3e8c..b61f442ed3033 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -805,12 +805,12 @@ static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv)

/* Make sure the EPHY is properly reseted, as U-Boot may leave
* it at deasserted state, and thus it may fail to reset EMAC.
+ *
+ * This assumes the driver has exclusive access to the EPHY reset.
*/
- reset_control_assert(gmac->rst_ephy);
-
- ret = reset_control_deassert(gmac->rst_ephy);
+ ret = reset_control_reset(gmac->rst_ephy);
if (ret) {
- dev_err(priv->device, "Cannot deassert internal phy\n");
+ dev_err(priv->device, "Cannot reset internal PHY\n");
clk_disable_unprepare(gmac->ephy_clk);
return ret;
}
--
2.26.2
\
 
 \ /
  Last update: 2021-02-17 11:39    [W:0.072 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site