lkml.org 
[lkml]   [2021]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] drm/msm: add compatibles for sm8150/sm8250 display
From
Date
On 2/16/21 11:54 AM, Dmitry Baryshkov wrote:
> On Mon, 15 Feb 2021 at 19:25, Jonathan Marek <jonathan@marek.ca> wrote:
>>
>> The driver already has support for sm8150/sm8250, but the compatibles were
>> never added.
>>
>> Also inverse the non-mdp4 condition in add_display_components() to avoid
>> having to check every new compatible in the condition.
>>
>> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
>> ---
>> Documentation/devicetree/bindings/display/msm/dpu.txt | 4 ++--
>> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++
>> drivers/gpu/drm/msm/msm_drv.c | 6 +++---
>> 3 files changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
>> index 551ae26f60da..5763f43200a0 100644
>> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
>> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
>> @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
>>
>> MDSS:
>> Required properties:
>> -- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss"
>> +- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sm8150-mdss", "qcom,sm8250-mdss"
>> - reg: physical base address and length of contoller's registers.
>> - reg-names: register region names. The following region is required:
>> * "mdss"
>> @@ -41,7 +41,7 @@ Optional properties:
>>
>> MDP:
>> Required properties:
>> -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
>> +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sm8150-dpu", "qcom,sm8250-dpu"
>> - reg: physical base address and length of controller's registers.
>> - reg-names : register region names. The following region is required:
>> * "mdp"
>
> These two chunks should probably go to the separate patch 'dt-bindings:...'.
>

In this case I think its better to have this change in the same patch,
but maybe one of the Robs will disagree.

> Also, could you please pinpoint the reason for adding more
> compatibility strings, while they map to the same internal data?
> I think we might want instead to use some generic name for the dpu
> block, like "qcom,dpu" or "qcom,mdp-dpu" instead of specifying the
> platform name.
>

sdm845 and sc7180 aren't using generic compatibles, this is just being
consistent with that.

>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> index 5a8e3e1fc48c..fff12a4c8bfc 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> @@ -1219,6 +1219,8 @@ static const struct dev_pm_ops dpu_pm_ops = {
>> static const struct of_device_id dpu_dt_match[] = {
>> { .compatible = "qcom,sdm845-dpu", },
>> { .compatible = "qcom,sc7180-dpu", },
>> + { .compatible = "qcom,sm8150-dpu", },
>> + { .compatible = "qcom,sm8250-dpu", },
>> {}
>> };
>> MODULE_DEVICE_TABLE(of, dpu_dt_match);
>> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
>> index 94525ac76d4e..928f13d4bfbc 100644
>> --- a/drivers/gpu/drm/msm/msm_drv.c
>> +++ b/drivers/gpu/drm/msm/msm_drv.c
>> @@ -1185,9 +1185,7 @@ static int add_display_components(struct device *dev,
>> * Populate the children devices, find the MDP5/DPU node, and then add
>> * the interfaces to our components list.
>> */
>> - if (of_device_is_compatible(dev->of_node, "qcom,mdss") ||
>> - of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss") ||
>> - of_device_is_compatible(dev->of_node, "qcom,sc7180-mdss")) {
>> + if (!of_device_is_compatible(dev->of_node, "qcom,mdp4")) {
>> ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
>> if (ret) {
>> DRM_DEV_ERROR(dev, "failed to populate children devices\n");
>> @@ -1320,6 +1318,8 @@ static const struct of_device_id dt_match[] = {
>> { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
>> { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
>> { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
>> + { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
>> + { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
>> {}
>> };
>> MODULE_DEVICE_TABLE(of, dt_match);
>> --
>> 2.26.1
>>
>
>

\
 
 \ /
  Last update: 2021-02-17 11:38    [W:0.082 / U:0.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site