lkml.org 
[lkml]   [2021]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: smpboot: CPU numbers printed as warning
From
Date
Dear Borislav, dear Petr,


Am 16.02.21 um 11:14 schrieb Borislav Petkov:
> On Tue, Feb 16, 2021 at 10:49:04AM +0100, Petr Mladek wrote:
>> Also you should add '\n' into the previous string to make the behavior
>> clear. It will always be printed on a new line when pr_info()
>> is used.
>
> This was made to use pr_cont() on purpose so that the output is compact,
> for example:
>
> [ 4.088605] x86: Booting SMP configuration:
> [ 4.089511] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35 #36 #37 #38 #39 #40 #41 #42 #43 #44 #45 #46 #47 #48 #49 #50 #51 #52 #53 #54 #55 #56 #57 #58 #59 #60 #61 #62 #63
> [ 4.188510] .... node #1, CPUs: #64 #65 #66 #67 #68 #69 #70 #71 #72 #73 #74 #75 #76 #77 #78 #79 #80 #81 #82 #83 #84 #85 #86 #87 #88 #89 #90 #91 #92 #93 #94 #95 #96 #97 #98 #99 #100 #101 #102 #103 #104 #105 #106 #107 #108 #109 #110 #111 #112 #113 #114 #115 #116 #117 #118 #119 #120 #121 #122 #123 #124 #125 #126 #127
> [ 4.307511] .... node #0, CPUs: #128 #129 #130 #131 #132 #133 #134 #135 #136 #137 #138 #139 #140 #141 #142 #143 #144 #145 #146 #147 #148 #149 #150 #151 #152 #153 #154 #155 #156 #157 #158 #159 #160 #161 #162 #163 #164 #165 #166 #167 #168 #169 #170 #171 #172 #173 #174 #175 #176 #177 #178 #179 #180 #181 #182 #183 #184 #185 #186 #187 #188 #189 #190 #191
> [ 4.416511] .... node #1, CPUs: #192 #193 #194 #195 #196 #197 #198 #199 #200 #201 #202 #203 #204 #205 #206 #207 #208 #209 #210 #211 #212 #213 #214 #215 #216 #217 #218 #219 #220 #221 #222 #223 #224 #225 #226 #227 #228 #229 #230 #231 #232 #233 #234 #235 #236 #237 #238 #239 #240 #241 #242 #243 #244 #245 #246 #247 #248 #249 #250 #251 #252 #253 #254 #255
> [ 4.531683] smp: Brought up 2 nodes, 256 CPUs
> [ 4.534510] smpboot: Max logical packages: 2
> [ 4.535527] smpboot: Total of 256 processors activated (1147449.34 BogoMIPS)

Yes, the intention is clear, but it’s not working perfectly in all
situations. Any ideas, how to improve that? After reading John’s
response, I’d go with `pr_cont(KERN_INFO "message part");`.

By the way, what are these CPU numbers useful for? Isn’t

smp: Brought up 2 nodes, 256 CPUs

enough information, and nothing else needed for the majority of users?


Kind regards,

Paul

\
 
 \ /
  Last update: 2021-02-17 11:37    [W:0.045 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site