lkml.org 
[lkml]   [2021]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH 01/13] futex2: Implement wait and wake functions
Date
André Almeida <andrealmeid@collabora.com> writes:

> Create a new set of futex syscalls known as futex2. This new interface
> is aimed to implement a more maintainable code, while removing obsolete
> features and expanding it with new functionalities.

Hi André. Some comments below

> +/* kernel/futex2.c */
> +asmlinkage long sys_futex_wait(void __user *uaddr, unsigned int val,
> + unsigned int flags,
> + struct __kernel_timespec __user __user *timo);

Duplicated __user attribute

> +asmlinkage long sys_futex_wake(void __user *uaddr, unsigned int nr_wake,
> + unsigned int flags);
> +
> /* kernel/hrtimer.c */
> asmlinkage long sys_nanosleep(struct __kernel_timespec __user *rqtp,
> struct __kernel_timespec __user *rmtp);
> diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
> index 728752917785..57e19200f7e4 100644
> --- a/include/uapi/asm-generic/unistd.h
> +++ b/include/uapi/asm-generic/unistd.h
> @@ -862,8 +862,14 @@ __SYSCALL(__NR_process_madvise, sys_process_madvise)
> #define __NR_epoll_pwait2 441
> __SC_COMP(__NR_epoll_pwait2, sys_epoll_pwait2, compat_sys_epoll_pwait2)
>
> +#define __NR_futex_wait 442
> +__SYSCALL(__NR_futex_wait, sys_futex_wait)
> +
> +#define __NR_futex_wake 443
> +__SYSCALL(__NR_futex_wake, sys_futex_wake)
> +
> #undef __NR_syscalls
> -#define __NR_syscalls 442
> +#define __NR_syscalls 444
>
> /*
> * 32 bit systems traditionally used different
> diff --git a/include/uapi/linux/futex.h b/include/uapi/linux/futex.h
> index a89eb0accd5e..9fbdaaf4f254 100644
> --- a/include/uapi/linux/futex.h
> +++ b/include/uapi/linux/futex.h
> @@ -41,6 +41,62 @@
> #define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \
> FUTEX_PRIVATE_FLAG)
>
> +/* Size argument to futex2 syscall */
> +#define FUTEX_8 0
> +#define FUTEX_16 1
> +#define FUTEX_32 2
> +
> +#define FUTEX_SIZE_MASK 0x3
> +
> +#define FUTEX_SHARED_FLAG 8
> +
> +#define FUTEX_NUMA_FLAG 16
> +
> +/**
> + * struct futexXX_numa - struct for NUMA-aware futex operation
> + * @value: futex value
> + * @hint: node id to operate
> + */
> +
> +struct futex8_numa {
> + __u8 value;
> + __s8 hint;
> +};
> +
> +struct futex16_numa {
> + __u16 value;
> + __s16 hint;
> +};
> +
> +struct futex32_numa {
> + __u32 value;
> + __s32 hint;
> +};

This patchset doesn't use these structures as far as I can see. Maybe
these should be on a later patchset, when there is actual support for
numa awareness ?

> +
> +#define FUTEX_WAITV_MAX 128
> +
> +/**
> + * struct futex_waitv - A waiter for vectorized wait
> + * @uaddr: User address to wait on
> + * @val: Expected value at uaddr
> + * @flags: Flags for this waiter
> + */
> +struct futex_waitv {
> + void *uaddr;
> + unsigned int val;
> + unsigned int flags;
> +};

Shouldn't this be in patch 3?
> +
> +/**
> + * struct futex_requeue - Define an address and its flags for requeue operation
> + * @uaddr: User address of one of the requeue arguments
> + * @flags: Flags for this address
> + */
> +struct futex_requeue {
> + void *uaddr;
> + unsigned int flags;
> +};

Shouldn't this be in patch 4?

> +/**
> + * struct futexv_head - List of futexes to be waited
> + * @task: Task to be awaken
> + * @hint: Was someone on this list awakened?
> + * @objects: List of futexes
> + */
> +struct futexv_head {
> + struct task_struct *task;
> + bool hint;
> + struct futex_waiter objects[0];
> +};

this structure is also used for a single futex. maybe struct futex_waiter_head?

> +
> +/**
> + * struct futex_bucket - A bucket of futex's hash table
> + * @waiters: Number of waiters in the bucket
> + * @lock: Bucket lock
> + * @list: List of waiters on this bucket
> + */
> +struct futex_bucket {
> + atomic_t waiters;
> + spinlock_t lock;
> + struct list_head list;
> +};
> +
> +/**
> + * struct futex_single_waiter - Wrapper for a futexv_head of one element
> + * @futexv: Single futexv element
> + * @waiter: Single waiter element
> + */
> +struct futex_single_waiter {
> + struct futexv_head futexv;
> + struct futex_waiter waiter;
> +} __packed;

Is this struct necessary? can't you just allocate the necessary space,
i.e. a struct futexv_head with 1 futexv_head->object?
> +
> +/* Mask for futex2 flag operations */
> +#define FUTEX2_MASK (FUTEX_SIZE_MASK | FUTEX_SHARED_FLAG | \
> + FUTEX_CLOCK_REALTIME)

SHARED_FLAG should be in patch 2

> +
> +/* Mask for sys_futex_waitv flag */
> +#define FUTEXV_MASK (FUTEX_CLOCK_REALTIME)
> +
> +/* Mask for each futex in futex_waitv list */
> +#define FUTEXV_WAITER_MASK (FUTEX_SIZE_MASK | FUTEX_SHARED_FLAG)
> +
> +struct futex_bucket *futex_table;
> +unsigned int futex2_hashsize;
> +
> +/*
> + * Reflects a new waiter being added to the waitqueue.
> + */
> +static inline void bucket_inc_waiters(struct futex_bucket *bucket)
> +{
> +#ifdef CONFIG_SMP
> + atomic_inc(&bucket->waiters);
> + /*
> + * Issue a barrier after adding so futex_wake() will see that the
> + * value had increased
> + */
> + smp_mb__after_atomic();
> +#endif
> +}
> +
> +/*
> + * Reflects a waiter being removed from the waitqueue by wakeup
> + * paths.
> + */
> +static inline void bucket_dec_waiters(struct futex_bucket *bucket)
> +{
> +#ifdef CONFIG_SMP
> + atomic_dec(&bucket->waiters);
> +#endif
> +}
> +
> +/*
> + * Get the number of waiters in a bucket
> + */
> +static inline int bucket_get_waiters(struct futex_bucket *bucket)
> +{
> +#ifdef CONFIG_SMP
> + /*
> + * Issue a barrier before reading so we get an updated value from
> + * futex_wait()
> + */
> + smp_mb();
> + return atomic_read(&bucket->waiters);
> +#else
> + return 1;
> +#endif
> +}
> +
> +/**
> + * futex_get_bucket - Check if the user address is valid, prepare internal
> + * data and calculate the hash
> + * @uaddr: futex user address
> + * @key: data that uniquely identifies a futex
> + *
> + * Return: address of bucket on success, error code otherwise
> + */
> +static struct futex_bucket *futex_get_bucket(void __user *uaddr,
> + struct futex_key *key)
> +{
> + uintptr_t address = (uintptr_t)uaddr;
> + u32 hash_key;
> +
> + /* Checking if uaddr is valid and accessible */
> + if (unlikely(!IS_ALIGNED(address, sizeof(u32))))
> + return ERR_PTR(-EINVAL);
> + if (unlikely(!access_ok(address, sizeof(u32))))
> + return ERR_PTR(-EFAULT);

This says the code only supports 32-bit. So, maybe drop the other
FUTEX_SIZE defines for now

> +
> + key->offset = address % PAGE_SIZE;
> + address -= key->offset;
> + key->pointer = (u64)address;
> + key->index = (unsigned long)current->mm;

Why split the key in offset and pointer and waste 1/3 more space to
store each key?

> +
> + /* Generate hash key for this futex using uaddr and current->mm */
> + hash_key = jhash2((u32 *)key, sizeof(*key) / sizeof(u32), 0);
> +
> + /* Since HASH_SIZE is 2^n, subtracting 1 makes a perfect bit mask */
> + return &futex_table[hash_key & (futex2_hashsize - 1)];

If someone inadvertely changes futex2_hashsize to something not 2^n this
will silently break. futex2_hashsize should be constant and you need
a BUILD_BUG_ON().

> +static int futex_enqueue(struct futexv_head *futexv, unsigned int nr_futexes,
> + int *awakened)
> +{
> + int i, ret;
> + u32 uval, *uaddr, val;
> + struct futex_bucket *bucket;
> +
> +retry:
> + set_current_state(TASK_INTERRUPTIBLE);
> +
> + for (i = 0; i < nr_futexes; i++) {
> + uaddr = (u32 * __user)futexv->objects[i].uaddr;
> + val = (u32)futexv->objects[i].val;
> +
> + bucket = futexv->objects[i].bucket;
> +
> + bucket_inc_waiters(bucket);
> + spin_lock(&bucket->lock);
> +
> + ret = futex_get_user(&uval, uaddr);
> +
> + if (unlikely(ret)) {
> + spin_unlock(&bucket->lock);
> +
> + bucket_dec_waiters(bucket);
> + __set_current_state(TASK_RUNNING);
> + *awakened = futex_dequeue_multiple(futexv, i);
> +
> + if (__get_user(uval, uaddr))
> + return -EFAULT;
> +
> + if (*awakened >= 0)
> + return 1;

If you are awakened, you don't need to waste time with trying to get the
next key.


> +/**
> + * futex_wait - Setup the timer (if there's one) and wait on a list of futexes
> + * @futexv: List of futexes
> + * @nr_futexes: Length of futexv
> + * @timo: Timeout
> + * @flags: Timeout flags
> + *
> + * Return:
> + * * 0 >= - Hint of which futex woke us
> + * * 0 < - Error code
> + */
> +static int futex_set_timer_and_wait(struct futexv_head *futexv,
> + unsigned int nr_futexes,
> + struct __kernel_timespec __user *timo,
> + unsigned int flags)
> +{
> + struct hrtimer_sleeper timeout;
> + int ret;
> +
> + if (timo) {
> + ret = futex_setup_time(timo, &timeout, flags);
> + if (ret)
> + return ret;
> + }
> +
> + ret = __futex_wait(futexv, nr_futexes, timo ? &timeout : NULL);
> +
> + if (timo)
> + hrtimer_cancel(&timeout.timer);
> +
> + return ret;
> +}

I'm having a hard time understanding why this function exists. part of
the futex is set up outside of it, part inside. Not sure if this isn't
just part of sys_futex_wait.

Thanks,

--
Gabriel Krisman Bertazi

\
 
 \ /
  Last update: 2021-02-15 21:01    [W:0.102 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site