lkml.org 
[lkml]   [2021]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V3 05/14] coresight: ete: Add support for ETE tracing
Reviewed-by: Mike Leach <mike.leach@linaro.org>

On Mon, 15 Feb 2021 at 13:21, Mike Leach <mike.leach@linaro.org> wrote:
>
> HI,
>
> On Tue, 2 Feb 2021 at 18:56, Mathieu Poirier <mathieu.poirier@linaro.org> wrote:
> >
> > On Wed, Jan 27, 2021 at 02:25:29PM +0530, Anshuman Khandual wrote:
> > > From: Suzuki K Poulose <suzuki.poulose@arm.com>
> > >
> > > Add ETE as one of the supported device types we support
> > > with ETM4x driver. The devices are named following the
> > > existing convention as ete<N>.
> > >
> > > ETE mandates that the trace resource status register is programmed
> > > before the tracing is turned on. For the moment simply write to
> > > it indicating TraceActive.
> > >
> > > Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> > > Cc: Mike Leach <mike.leach@linaro.org>
> > > Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> > > Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
> > > ---
> > > drivers/hwtracing/coresight/Kconfig | 10 ++--
> > > drivers/hwtracing/coresight/coresight-etm4x-core.c | 56 +++++++++++++++++-----
> > > .../hwtracing/coresight/coresight-etm4x-sysfs.c | 19 ++++++--
> > > drivers/hwtracing/coresight/coresight-etm4x.h | 16 ++++++-
> > > 4 files changed, 79 insertions(+), 22 deletions(-)
> > >
> > > diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
> > > index 7b44ba2..f154ae7 100644
> > > --- a/drivers/hwtracing/coresight/Kconfig
> > > +++ b/drivers/hwtracing/coresight/Kconfig
> > > @@ -97,15 +97,15 @@ config CORESIGHT_SOURCE_ETM3X
> > > module will be called coresight-etm3x.
> > >
> > > config CORESIGHT_SOURCE_ETM4X
> > > - tristate "CoreSight Embedded Trace Macrocell 4.x driver"
> > > + tristate "CoreSight ETMv4.x / ETE driver"
> > > depends on ARM64
> > > select CORESIGHT_LINKS_AND_SINKS
> > > select PID_IN_CONTEXTIDR
> > > help
> > > - This driver provides support for the ETM4.x tracer module, tracing the
> > > - instructions that a processor is executing. This is primarily useful
> > > - for instruction level tracing. Depending on the implemented version
> > > - data tracing may also be available.
> > > + This driver provides support for the CoreSight Embedded Trace Macrocell
> > > + version 4.x and the Embedded Trace Extensions (ETE). Both are CPU tracer
> > > + modules, tracing the instructions that a processor is executing. This is
> > > + primarily useful for instruction level tracing.
> > >
> > > To compile this driver as a module, choose M here: the
> > > module will be called coresight-etm4x.
> > > diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> > > index 9e92d2a..b40e3c2 100644
> > > --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
> > > +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> > > @@ -431,6 +431,13 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
> > > etm4x_relaxed_write32(csa, trcpdcr | TRCPDCR_PU, TRCPDCR);
> > > }
> > >
> > > + /*
> > > + * ETE mandates that the TRCRSR is written to before
> > > + * enabling it.
> > > + */
> > > + if (etm4x_is_ete(drvdata))
> > > + etm4x_relaxed_write32(csa, TRCRSR_TA, TRCRSR);
> > > +
> > > /* Enable the trace unit */
> > > etm4x_relaxed_write32(csa, 1, TRCPRGCTLR);
> > >
> > > @@ -864,13 +871,24 @@ static bool etm4_init_sysreg_access(struct etmv4_drvdata *drvdata,
> > > * ETMs implementing sysreg access must implement TRCDEVARCH.
> > > */
> > > devarch = read_etm4x_sysreg_const_offset(TRCDEVARCH);
> > > - if ((devarch & ETM_DEVARCH_ID_MASK) != ETM_DEVARCH_ETMv4x_ARCH)
> > > + switch (devarch & ETM_DEVARCH_ID_MASK) {
> > > + case ETM_DEVARCH_ETMv4x_ARCH:
> > > + *csa = (struct csdev_access) {
> > > + .io_mem = false,
> > > + .read = etm4x_sysreg_read,
> > > + .write = etm4x_sysreg_write,
> > > + };
> > > + break;
> > > + case ETM_DEVARCH_ETE_ARCH:
> > > + *csa = (struct csdev_access) {
> > > + .io_mem = false,
> > > + .read = ete_sysreg_read,
> > > + .write = ete_sysreg_write,
> > > + };
> > > + break;
> > > + default:
> > > return false;
> > > - *csa = (struct csdev_access) {
> > > - .io_mem = false,
> > > - .read = etm4x_sysreg_read,
> > > - .write = etm4x_sysreg_write,
> > > - };
> > > + }
> > >
> > > drvdata->arch = etm_devarch_to_arch(devarch);
> > > return true;
> > > @@ -1808,6 +1826,8 @@ static int etm4_probe(struct device *dev, void __iomem *base, u32 etm_pid)
> > > struct etmv4_drvdata *drvdata;
> > > struct coresight_desc desc = { 0 };
> > > struct etm4_init_arg init_arg = { 0 };
> > > + u8 major, minor;
> > > + char *type_name;
> > >
> > > drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
> > > if (!drvdata)
> > > @@ -1834,10 +1854,6 @@ static int etm4_probe(struct device *dev, void __iomem *base, u32 etm_pid)
> > > if (drvdata->cpu < 0)
> > > return drvdata->cpu;
> > >
> > > - desc.name = devm_kasprintf(dev, GFP_KERNEL, "etm%d", drvdata->cpu);
> > > - if (!desc.name)
> > > - return -ENOMEM;
> > > -
> > > init_arg.drvdata = drvdata;
> > > init_arg.csa = &desc.access;
> > > init_arg.pid = etm_pid;
> > > @@ -1853,6 +1869,20 @@ static int etm4_probe(struct device *dev, void __iomem *base, u32 etm_pid)
> > > if (!desc.access.io_mem ||
> > > fwnode_property_present(dev_fwnode(dev), "qcom,skip-power-up"))
> > > drvdata->skip_power_up = true;
> >
> > Add a space here...
> >
> > > + major = ETM_ARCH_MAJOR_VERSION(drvdata->arch);
> > > + minor = ETM_ARCH_MINOR_VERSION(drvdata->arch);
> >
> > And here too. Othersiwe it makes a big blob in the middle of the function.
> >
> > > + if (etm4x_is_ete(drvdata)) {
> > > + type_name = "ete";
> > > + /* ETE v1 has major version == 5. Adjust this for logging.*/
> > > + major -= 4;
> >
> > I don't have the documentation for the ETE but I would not adjust @major. I
> > would simply leave it to what the HW gives us since regardless of the name, the
> > major revision of the IP block is 5.
> >
>
> For consistency this adjustment should be retained. All the prior
> drivers reported the protocol version related to this.
> For ETM3.x this value was 0x2 - logging printed "ETMv3.x", for PTM
> this value was 0x3 - logging printed "PTM 1.x".
> Only for ETMv4 is this value the same as the protocol version.
>
> Mike
>
>
> > > + } else {
> > > + type_name = "etm";
> > > + }
> > > +
> > > + desc.name = devm_kasprintf(dev, GFP_KERNEL,
> > > + "%s%d", type_name, drvdata->cpu);
> > > + if (!desc.name)
> > > + return -ENOMEM;
> > >
> > > etm4_init_trace_id(drvdata);
> > > etm4_set_default(&drvdata->config);
> > > @@ -1881,9 +1911,8 @@ static int etm4_probe(struct device *dev, void __iomem *base, u32 etm_pid)
> > >
> > > etmdrvdata[drvdata->cpu] = drvdata;
> > >
> > > - dev_info(&drvdata->csdev->dev, "CPU%d: ETM v%d.%d initialized\n",
> > > - drvdata->cpu, ETM_ARCH_MAJOR_VERSION(drvdata->arch),
> > > - ETM_ARCH_MINOR_VERSION(drvdata->arch));
> > > + dev_info(&drvdata->csdev->dev, "CPU%d: %s v%d.%d initialized\n",
> > > + drvdata->cpu, type_name, major, minor);
> > >
> > > if (boot_enable) {
> > > coresight_enable(drvdata->csdev);
> > > @@ -2027,6 +2056,7 @@ static struct amba_driver etm4x_amba_driver = {
> > >
> > > static const struct of_device_id etm4_sysreg_match[] = {
> > > { .compatible = "arm,coresight-etm4x-sysreg" },
> > > + { .compatible = "arm,embedded-trace-extension" },
> > > {}
> > > };
> > >
> > > diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> > > index b646d53..1c490bc 100644
> > > --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> > > +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> > > @@ -2374,12 +2374,20 @@ static inline bool
> > > etm4x_register_implemented(struct etmv4_drvdata *drvdata, u32 offset)
> > > {
> > > switch (offset) {
> > > - ETM4x_SYSREG_LIST_CASES
> > > + ETM_COMMON_SYSREG_LIST_CASES
> > > /*
> > > - * Registers accessible via system instructions are always
> > > - * implemented.
> > > + * Common registers to ETE & ETM4x accessible via system
> > > + * instructions are always implemented.
> > > */
> > > return true;
> > > +
> > > + ETM4x_ONLY_SYSREG_LIST_CASES
> > > + /*
> > > + * We only support etm4x and ete. So if the device is not
> > > + * ETE, it must be ETMv4x.
> > > + */
> > > + return !etm4x_is_ete(drvdata);
> > > +
> > > ETM4x_MMAP_LIST_CASES
> > > /*
> > > * Registers accessible only via memory-mapped registers
> > > @@ -2389,8 +2397,13 @@ etm4x_register_implemented(struct etmv4_drvdata *drvdata, u32 offset)
> > > * coresight_register() and the csdev is not initialized
> > > * until that is done. So rely on the drvdata->base to
> > > * detect if we have a memory mapped access.
> > > + * Also ETE doesn't implement memory mapped access, thus
> > > + * it is sufficient to check that we are using mmio.
> > > */
> > > return !!drvdata->base;
> > > +
> > > + ETE_ONLY_SYSREG_LIST_CASES
> > > + return etm4x_is_ete(drvdata);
> > > }
> > >
> > > return false;
> > > diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
> > > index ca24ac5..8b90de5 100644
> > > --- a/drivers/hwtracing/coresight/coresight-etm4x.h
> > > +++ b/drivers/hwtracing/coresight/coresight-etm4x.h
> > > @@ -128,6 +128,8 @@
> > > #define TRCCIDR2 0xFF8
> > > #define TRCCIDR3 0xFFC
> > >
> > > +#define TRCRSR_TA BIT(12)
> > > +
> > > /*
> > > * System instructions to access ETM registers.
> > > * See ETMv4.4 spec ARM IHI0064F section 4.3.6 System instructions
> > > @@ -390,6 +392,9 @@
> > > #define ETM_COMMON_SYSREG_LIST_CASES \
> > > ETM_COMMON_SYSREG_LIST(NOP, __unused)
> > >
> > > +#define ETM4x_ONLY_SYSREG_LIST_CASES \
> > > + ETM4x_ONLY_SYSREG_LIST(NOP, __unused)
> > > +
> > > #define ETM4x_SYSREG_LIST_CASES \
> > > ETM_COMMON_SYSREG_LIST_CASES \
> > > ETM4x_ONLY_SYSREG_LIST(NOP, __unused)
> > > @@ -406,7 +411,6 @@
> > > ETE_ONLY_SYSREG_LIST(WRITE, (val))
> > >
> > > #define ETE_ONLY_SYSREG_LIST_CASES \
> > > - ETM_COMMON_SYSREG_LIST_CASES \
> >
> > This goes in patch 04.
> >
> > With the above:
> >
> > Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> >
> > > ETE_ONLY_SYSREG_LIST(NOP, __unused)
> > >
> > > #define read_etm4x_sysreg_offset(offset, _64bit) \
> > > @@ -589,11 +593,14 @@
> > > ((ETM_DEVARCH_MAKE_ARCHID_ARCH_VER(major)) | ETM_DEVARCH_ARCHID_ARCH_PART(0xA13))
> > >
> > > #define ETM_DEVARCH_ARCHID_ETMv4x ETM_DEVARCH_MAKE_ARCHID(0x4)
> > > +#define ETM_DEVARCH_ARCHID_ETE ETM_DEVARCH_MAKE_ARCHID(0x5)
> > >
> > > #define ETM_DEVARCH_ID_MASK \
> > > (ETM_DEVARCH_ARCHITECT_MASK | ETM_DEVARCH_ARCHID_MASK | ETM_DEVARCH_PRESENT)
> > > #define ETM_DEVARCH_ETMv4x_ARCH \
> > > (ETM_DEVARCH_ARCHITECT_ARM | ETM_DEVARCH_ARCHID_ETMv4x | ETM_DEVARCH_PRESENT)
> > > +#define ETM_DEVARCH_ETE_ARCH \
> > > + (ETM_DEVARCH_ARCHITECT_ARM | ETM_DEVARCH_ARCHID_ETE | ETM_DEVARCH_PRESENT)
> > >
> > > #define TRCSTATR_IDLE_BIT 0
> > > #define TRCSTATR_PMSTABLE_BIT 1
> > > @@ -683,6 +690,8 @@
> > > #define ETM_ARCH_MINOR_VERSION(arch) ((arch) & 0xfU)
> > >
> > > #define ETM_ARCH_V4 ETM_ARCH_VERSION(4, 0)
> > > +#define ETM_ARCH_ETE ETM_ARCH_VERSION(5, 0)
> > > +
> > > /* Interpretation of resource numbers change at ETM v4.3 architecture */
> > > #define ETM_ARCH_V4_3 ETM_ARCH_VERSION(4, 3)
> > >
> > > @@ -989,4 +998,9 @@ void etm4_config_trace_mode(struct etmv4_config *config);
> > >
> > > u64 etm4x_sysreg_read(u32 offset, bool _relaxed, bool _64bit);
> > > void etm4x_sysreg_write(u64 val, u32 offset, bool _relaxed, bool _64bit);
> > > +
> > > +static inline bool etm4x_is_ete(struct etmv4_drvdata *drvdata)
> > > +{
> > > + return drvdata->arch >= ETM_ARCH_ETE;
> > > +}
> > > #endif
> > > --
> > > 2.7.4
> > >
>
>
>
> --
> Mike Leach
> Principal Engineer, ARM Ltd.
> Manchester Design Centre. UK



--
Mike Leach
Principal Engineer, ARM Ltd.
Manchester Design Centre. UK

\
 
 \ /
  Last update: 2021-02-15 15:11    [W:0.195 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site