lkml.org 
[lkml]   [2021]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 19/25] tty: serial: samsung_tty: IRQ rework
Date
* Split out s3c24xx_serial_tx_chars from s3c24xx_serial_tx_irq,
where only the latter acquires the port lock.

* For S3C64xx, return IRQ_NONE if no flag bits were set, so the
interrupt core can detect IRQ storms. Note that both IRQ handlers
always return IRQ_HANDLED anyway, so 'or' logic isn't necessary here,
if either handler ran we are always going to return IRQ_HANDLED.

* Rename s3c24xx_serial_rx_chars to s3c24xx_serial_rx_irq for
consistency with the above. All it does now is call two other
functions anyway.

Signed-off-by: Hector Martin <marcan@marcan.st>
---
drivers/tty/serial/samsung_tty.c | 41 +++++++++++++++++++-------------
1 file changed, 24 insertions(+), 17 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 21955be680a4..821cd0e4f870 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -151,6 +151,9 @@ struct s3c24xx_uart_port {
#endif
};

+static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
+static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport);
+
/* conversion functions */

#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
@@ -316,8 +319,6 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
ourport->tx_mode = 0;
}

-static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
-
static void s3c24xx_serial_tx_dma_complete(void *args)
{
struct s3c24xx_uart_port *ourport = args;
@@ -825,7 +826,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
return IRQ_HANDLED;
}

-static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id)
+static irqreturn_t s3c24xx_serial_rx_irq(int irq, void *dev_id)
{
struct s3c24xx_uart_port *ourport = dev_id;

@@ -834,16 +835,12 @@ static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id)
return s3c24xx_serial_rx_chars_pio(dev_id);
}

-static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
+static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport)
{
- struct s3c24xx_uart_port *ourport = id;
struct uart_port *port = &ourport->port;
struct circ_buf *xmit = &port->state->xmit;
- unsigned long flags;
int count, dma_count = 0;

- spin_lock_irqsave(&port->lock, flags);
-
count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);

if (ourport->dma && ourport->dma->tx_chan &&
@@ -860,7 +857,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
wr_reg(port, S3C2410_UTXH, port->x_char);
port->icount.tx++;
port->x_char = 0;
- goto out;
+ return;
}

/* if there isn't anything more to transmit, or the uart is now
@@ -869,7 +866,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)

if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
s3c24xx_serial_stop_tx(port);
- goto out;
+ return;
}

/* try and drain the buffer... */
@@ -891,7 +888,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)

if (!count && dma_count) {
s3c24xx_serial_start_tx_dma(ourport, dma_count);
- goto out;
+ return;
}

if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
@@ -902,8 +899,18 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)

if (uart_circ_empty(xmit))
s3c24xx_serial_stop_tx(port);
+}
+
+static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id)
+{
+ struct s3c24xx_uart_port *ourport = id;
+ struct uart_port *port = &ourport->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ s3c24xx_serial_tx_chars(ourport);

-out:
spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
}
@@ -914,14 +921,14 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
struct s3c24xx_uart_port *ourport = id;
struct uart_port *port = &ourport->port;
unsigned int pend = rd_regl(port, S3C64XX_UINTP);
- irqreturn_t ret = IRQ_HANDLED;
+ irqreturn_t ret = IRQ_NONE;

if (pend & S3C64XX_UINTM_RXD_MSK) {
- ret = s3c24xx_serial_rx_chars(irq, id);
+ ret = s3c24xx_serial_rx_irq(irq, id);
wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
}
if (pend & S3C64XX_UINTM_TXD_MSK) {
- ret = s3c24xx_serial_tx_chars(irq, id);
+ ret = s3c24xx_serial_tx_irq(irq, id);
wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
}
return ret;
@@ -1153,7 +1160,7 @@ static int s3c24xx_serial_startup(struct uart_port *port)

ourport->rx_enabled = 1;

- ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
+ ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_irq, 0,
s3c24xx_serial_portname(port), ourport);

if (ret != 0) {
@@ -1167,7 +1174,7 @@ static int s3c24xx_serial_startup(struct uart_port *port)

ourport->tx_enabled = 1;

- ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
+ ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_irq, 0,
s3c24xx_serial_portname(port), ourport);

if (ret) {
--
2.30.0
\
 
 \ /
  Last update: 2021-02-15 13:27    [W:0.366 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site