lkml.org 
[lkml]   [2021]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] net: stmmac: Add Toshiba Visconti SoCs glue driver
Hi,

On Sun, Feb 14, 2021 at 08:23:25AM +0200, Leon Romanovsky wrote:
> On Fri, Feb 12, 2021 at 11:58:04AM +0900, Nobuhiro Iwamatsu wrote:
> > Add dwmac-visconti to the stmmac driver in Toshiba Visconti ARM SoCs.
> > This patch contains only the basic function of the device. There is no
> > clock control, PM, etc. yet. These will be added in the future.
> >
> > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> > ---
> > drivers/net/ethernet/stmicro/stmmac/Kconfig | 8 +
> > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
> > .../ethernet/stmicro/stmmac/dwmac-visconti.c | 288 ++++++++++++++++++
> > 3 files changed, 297 insertions(+)
> > create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> > index 53f14c5a9e02..55ba67a550b9 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> > +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> > @@ -219,6 +219,14 @@ config DWMAC_INTEL_PLAT
> > This selects the Intel platform specific glue layer support for
> > the stmmac device driver. This driver is used for the Intel Keem Bay
> > SoC.
> > +
> > +config DWMAC_VISCONTI
> > + bool "Toshiba Visconti DWMAC support"
> > + def_bool y
>
> Doesn't it need to be "default y"?
>

Indeed. I will remove this.

Thanks.

Best regards,
Nobuhiro

\
 
 \ /
  Last update: 2021-02-15 05:54    [W:0.033 / U:1.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site