lkml.org 
[lkml]   [2021]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 4/5] dts: marvell: Enable 10G interfaces on 9130-DB and 9131-DB boards
śr., 10 lut 2021 o 14:16 <kostap@marvell.com> napisał(a):
>
> From: Stefan Chulski <stefanc@marvell.com>
>
> This patch enables eth0 10G interface on CN9130-DB paltforms and
> eth0 10G and eth3 10G interfaces on CN9131-DB.

Thank you.
Reviewed-by: Marcin Wojtas <mw@semihalf.com>

>
> Signed-off-by: Stefan Chulski <stefanc@marvell.com>
> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
> ---
> arch/arm64/boot/dts/marvell/cn9130-db.dtsi | 2 +-
> arch/arm64/boot/dts/marvell/cn9131-db.dtsi | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
> index 8de3a552b806..97c74b81fd78 100644
> --- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
> +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
> @@ -125,7 +125,7 @@
>
> /* SLM-1521-V2, CON9 */
> &cp0_eth0 {
> - status = "disabled";
> + status = "okay";
> phy-mode = "10gbase-kr";
> /* Generic PHY, providing serdes lanes */
> phys = <&cp0_comphy4 0>;
> diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
> index 82471a83ad6d..f2e4d3a6a4f8 100644
> --- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
> +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
> @@ -84,7 +84,7 @@
>
> /* CON50 */
> &cp1_eth0 {
> - status = "disabled";
> + status = "okay";
> phy-mode = "10gbase-kr";
> /* Generic PHY, providing serdes lanes */
> phys = <&cp1_comphy4 0>;
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2021-02-10 15:04    [W:0.091 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site