Messages in this thread | | | From | Adam Ford <> | Date | Wed, 10 Feb 2021 14:40:38 -0600 | Subject | Re: [PATCH V3 1/2] dt-bindings: clk: versaclock5: Add optional load capacitance property |
| |
On Wed, Feb 10, 2021 at 2:18 PM Rob Herring <robh@kernel.org> wrote: > > On Sun, Feb 07, 2021 at 12:51:38PM -0600, Adam Ford wrote: > > There are two registers which can set the load capacitance for > > XTAL1 and XTAL2. These are optional registers when using an > > external crystal. Since XTAL1 and XTAL2 will set to the same value, > > update the binding to support a single property called > > xtal-load-femtofarads. > > > > Signed-off-by: Adam Ford <aford173@gmail.com> > > --- > > V3: No Change > > V2: No Change > > > > A couple people suggested that I not use the $ref, but without it, > > the bindings check failed with errors. > > > > diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml > > index 2ac1131fd922..c268debe5b8d 100644 > > --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml > > +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml > > @@ -59,6 +59,12 @@ properties: > > minItems: 1 > > maxItems: 2 > > > > + idt,xtal-load-femtofarads: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > Don't need a type with standard unit suffix.
If I remove that line, the binding check fails.
adam > > > + minimum: 9000 > > + maximum: 22760 > > + description: Optional load capacitor for XTAL1 and XTAL2 > > + > > patternProperties: > > "^OUT[1-4]$": > > type: object > > -- > > 2.25.1 > >
| |