lkml.org 
[lkml]   [2021]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 7/7] drm/mediatek: Add mt8195 DisplayPort driver
On Wed, Nov 10, 2021 at 9:08 PM Guillaume Ranquet <granquet@baylibre.com> wrote:
>
> From: Markus Schneider-Pargmann <msp@baylibre.com>
>
> This patch adds a DisplayPort driver for the Mediatek mt8195 SoC and a
> according phy driver mediatek-dp-phy.
>
> It supports both functional units on the mt8195, the embedded
> DisplayPort as well as the external DisplayPort units. It offers
> hot-plug-detection, audio up to 8 channels, and DisplayPort 1.4 with up
> to 4 lanes.
>
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so that
> both can work with the same register range. The phy driver sets device
> data that is read by the parent to get the phy device that can be used
> to control the phy properties.
>
> This driver is based on an initial version by
> Jason-JH.Lin <jason-jh.lin@mediatek.com>.
>
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> Reported-by: kernel test robot <lkp@intel.com>
> ---


<snip>

> +static int mtk_dp_probe(struct platform_device *pdev)
> +{
> + struct mtk_dp *mtk_dp;
> + struct device *dev = &pdev->dev;
> + int ret;
> + int irq_num = 0;
> + struct drm_panel *panel = NULL;
> +
> + mtk_dp = devm_kzalloc(dev, sizeof(*mtk_dp), GFP_KERNEL);
> + if (!mtk_dp)
> + return -ENOMEM;
> +
> + mtk_dp->dev = dev;
> +
> + irq_num = platform_get_irq(pdev, 0);
> + if (irq_num < 0) {
> + dev_err(dev, "failed to request dp irq resource\n");
> + return -EPROBE_DEFER;
> + }
> +
> + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel,
> + &mtk_dp->next_bridge);
> + if (ret == -ENODEV) {
> + dev_info(
> + dev,
> + "No panel connected in devicetree, continuing as external DP\n");
> + mtk_dp->next_bridge = NULL;
> + } else if (ret) {
> + dev_err(dev, "Failed to find panel or bridge: %d\n", ret);

Hi,

We're seeing
[ 0.424599] mediatek-drm-dp 1c500000.edp_tx: Failed to find panel
or bridge: -517

It's probably better to use dev_err_probe here.

Thanks

> + return ret;
> + }
> +
> + if (panel) {
> + mtk_dp->next_bridge = devm_drm_panel_bridge_add(dev, panel);
> + if (IS_ERR(mtk_dp->next_bridge)) {
> + ret = PTR_ERR(mtk_dp->next_bridge);
> + dev_err(dev, "Failed to create bridge: %d\n", ret);
> + return -EPROBE_DEFER;
> + }
> + }


<snip>

> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

\
 
 \ /
  Last update: 2021-12-09 07:31    [W:0.169 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site