lkml.org 
[lkml]   [2021]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH] Bluetooth: btqca: sequential validation
Date


-----Original Message-----
From: Marcel Holtmann <marcel@holtmann.org>
Sent: Wednesday, December 8, 2021 8:18 PM
To: Sai Teja Aluvala (Temp) (QUIC) <quic_saluvala@quicinc.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>; Matthias Kaehlcke <mka@chromium.org>; Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; linux-bluetooth <linux-bluetooth@vger.kernel.org>; Hemant Gupta (QUIC) <quic_hemantg@quicinc.com>; MSM <linux-arm-msm@vger.kernel.org>; quic_bgodavar <quic_bgodavar@quicinc.com>; Rocky Liao <rjliao@codeaurora.org>; hbandi@codeaurora.org; Abhishek Pandit-Subedi <abhishekpandit@chromium.org>; Miao-chen Chou <mcchou@chromium.org>; PANICKER HARISH (Temp) (QUIC) <quic_pharish@quicinc.com>
Subject: Re: [PATCH] Bluetooth: btqca: sequential validation

Hi Sai,

> This change will have sequential validation support & patch config
> command is added
>
> Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
> ---
> drivers/bluetooth/btqca.c | 45
> +++++++++++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btqca.h | 3 +++
> 2 files changed, 48 insertions(+)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index be04d74..9a2fd17 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -141,6 +141,49 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
> return err;
> }
>
> +int qca_send_patch_config_cmd(struct hci_dev *hdev, enum
> +qca_btsoc_type soc_type) {

look, I have limited understanding for people ignoring warnings. The missing static declaration is obvious and when you compile the code it will actually tell you about it.
[Sai] : will update in next patch

> + struct sk_buff *skb;
> + int err = 0;
> + u8 cmd[5] = {EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0};

const u8 cmd[] = { EDL.., .., 0 };
[sai]: will update in next patch

> + u8 rlen = 0x02;
> + struct edl_event_hdr *edl;
> + u8 rtype = EDL_PATCH_CONFIG_CMD;
> +
> + bt_dev_dbg(hdev, "QCA Patch config");
> +
> + skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE,
> +EDL_PATCH_CONFIG_CMD_LEN,

sizeof(cmd)
[sai]: will update in next patch

> + cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);

Indentation is wrong.
[sai] : will update in next patch
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "Sending QCA Patch config failed (%d)", err);
> + return err;
> + }
> + if (skb->len != rlen) {
> + bt_dev_err(hdev, "QCA Patch config cmd size mismatch len %d", skb->len);
> + err = -EILSEQ;
> + goto out;
> + }

Extra empty line,
[Sai]: will remove extra line in next patch
> + edl = (struct edl_event_hdr *)(skb->data);
> + if (!edl) {
> + bt_dev_err(hdev, "QCA Patch config with no header");
> + err = -EILSEQ;
> + goto out;
> + }

Here as well.
[Sai]: will remove in next patch
> + if (edl->cresp != EDL_PATCH_CONFIG_RES_EVT || edl->rtype != rtype) {
> + bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
> + edl->rtype);

Wrong indentation.
[Sai] : will update in next patch.
> + err = -EIO;
> + goto out;
> + }
> +out:
> + kfree(skb);
> + if (err)
> + bt_dev_err(hdev, "QCA Patch config cmd failed (%d)", err);
> +
> + return err;
> +}
> +
> static int qca_send_reset(struct hci_dev *hdev) {
> struct sk_buff *skb;
> @@ -551,6 +594,8 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> */
> rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
>
> + if (soc_type == QCA_WCN6750)
> + qca_send_patch_config_cmd(hdev, soc_type);

Extra empty line.
If you are not using the soc_type, then don’t add it as parameter.
[Sai] : will remove in next patch.

> /* Download rampatch file */
> config.type = TLV_TYPE_PATCH;
> if (qca_is_wcn399x(soc_type)) {
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 30afa77..8fbb4c7 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -13,6 +13,8 @@
> #define EDL_PATCH_TLV_REQ_CMD (0x1E)
> #define EDL_GET_BUILD_INFO_CMD (0x20)
> #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
> +#define EDL_PATCH_CONFIG_CMD_LEN (0x05)

Not needed.
[Sai] : will remove in next patch.

> +#define EDL_PATCH_CONFIG_CMD (0x28)
> #define MAX_SIZE_PER_TLV_SEGMENT (243)
> #define QCA_PRE_SHUTDOWN_CMD (0xFC08)
> #define QCA_DISABLE_LOGGING (0xFC17)
> @@ -24,6 +26,7 @@
> #define EDL_CMD_EXE_STATUS_EVT (0x00)
> #define EDL_SET_BAUDRATE_RSP_EVT (0x92)
> #define EDL_NVM_ACCESS_CODE_EVT (0x0B)
> +#define EDL_PATCH_CONFIG_RES_EVT (0x00)
> #define QCA_DISABLE_LOGGING_SUB_OP (0x14)
>
> #define EDL_TAG_ID_HCI (17)

Regards

Marcel

\
 
 \ /
  Last update: 2021-12-09 06:24    [W:0.062 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site