lkml.org 
[lkml]   [2021]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/2] dt-bindings: net: Convert SYSTEMPORT to YAML
Date
Convert the Broadcom SYSTEMPORT Ethernet controller Device Tree binding
to YAML.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
.../bindings/net/brcm,systemport.txt | 38 --------
.../bindings/net/brcm,systemport.yaml | 88 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 89 insertions(+), 38 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.txt
create mode 100644 Documentation/devicetree/bindings/net/brcm,systemport.yaml

diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt
deleted file mode 100644
index 75736739bfdd..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,systemport.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
-
-Required properties:
-- compatible: should be one of:
- "brcm,systemport-v1.00"
- "brcm,systemportlite-v1.00" or
- "brcm,systemport"
-- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the rx
- interrupts, and the second cell should be for the transmit queues. An
- optional third interrupt cell for Wake-on-LAN can be specified
-- local-mac-address: Ethernet MAC address (48 bits) of this adapter
-- phy-mode: Should be a string describing the PHY interface to the
- Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
-- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
- the property specific details
-
-Optional properties:
-- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
-- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
-- systemport,num-txq: number of HW transmit queues, an integer
-- systemport,num-rxq: number of HW receive queues, an integer
-- clocks: When provided, must be two phandles to the functional clocks nodes of
- the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used
- during normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
- name should be "sw_sysport" and second should be "sw_sysportwol".
-
-Example:
-ethernet@f04a0000 {
- compatible = "brcm,systemport-v1.00";
- reg = <0xf04a0000 0x4650>;
- local-mac-address = [ 00 11 22 33 44 55 ];
- fixed-link = <0 1 1000 0 0>;
- phy-mode = "gmii";
- interrupts = <0x0 0x16 0x0>,
- <0x0 0x17 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
new file mode 100644
index 000000000000..53ecec8c864e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,systemport.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - brcm,systemport-v1.00
+ - brcm,systemportlite-v1.00
+ - brcm,systemport
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ items:
+ - description: interrupt line for RX queues
+ - description: interrupt line for TX queues
+ - description: interrupt line for Wake-on-LAN
+
+ clocks:
+ items:
+ - description: main clock
+ - description: Wake-on-LAN clock
+
+ clock-names:
+ items:
+ - const: sw_sysport
+ - const: sw_sysportwol
+
+ systemport,num-tier2-arb:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of tier 2 arbiters
+
+ systemport,num-tier1-arb:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of tier 2 arbiters
+
+ systemport,num-txq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ items:
+ - minimum: 1
+ - maximum: 32
+ description:
+ Number of HW transmit queues
+
+ systemport,num-rxq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ items:
+ - minimum: 1
+ - maximum: 32
+ description:
+ Number of HW receive queues
+
+required:
+ - reg
+ - interrupts
+ - phy-mode
+
+allOf:
+ - $ref: "ethernet-controller.yaml#"
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet@f04a0000 {
+ compatible = "brcm,systemport-v1.00";
+ reg = <0xf04a0000 0x4650>;
+ local-mac-address = [ 00 11 22 33 44 55 ];
+ phy-mode = "gmii";
+ interrupts = <0x0 0x16 0x0>,
+ <0x0 0x17 0x0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 404e76d625f1..ed8de605fe4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3972,6 +3972,7 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/broadcom/bcmsysport.*
F: drivers/net/ethernet/broadcom/unimac.h
+F: Documentation/devicetree/bindings/net/brcm,systemport.yaml

BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Siva Reddy Kallam <siva.kallam@broadcom.com>
--
2.25.1
\
 
 \ /
  Last update: 2021-12-08 21:29    [W:0.043 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site