lkml.org 
[lkml]   [2021]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/4] iommu/vt-d: Support PASID DMA for in-kernel usage
Hi Jason,

On Wed, 8 Dec 2021 09:22:55 -0400, Jason Gunthorpe <jgg@nvidia.com> wrote:

> On Tue, Dec 07, 2021 at 05:47:13AM -0800, Jacob Pan wrote:
> > Between DMA requests with and without PASID (legacy), DMA mapping APIs
> > are used indiscriminately on a device. Therefore, we should always match
> > the addressing mode of the legacy DMA when enabling kernel PASID.
> >
> > This patch adds support for VT-d driver where the kernel PASID is
> > programmed to match RIDPASID. i.e. if the device is in pass-through, the
> > kernel PASID is also in pass-through; if the device is in IOVA mode, the
> > kernel PASID will also be using the same IOVA space.
> >
> > There is additional handling for IOTLB and device TLB flush w.r.t. the
> > kernel PASID. On VT-d, PASID-selective IOTLB flush is also on a
> > per-domain basis; whereas device TLB flush is per device. Note that
> > IOTLBs are used even when devices are in pass-through mode. ATS is
> > enabled device-wide, but the device drivers can choose to manage ATS at
> > per PASID level whenever control is available.
> >
> > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > drivers/iommu/intel/iommu.c | 105 +++++++++++++++++++++++++++++++++++-
> > drivers/iommu/intel/pasid.c | 7 +++
> > include/linux/intel-iommu.h | 3 +-
> > 3 files changed, 113 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> > index 60253bc436bb..a2ef6b9e4bfc 100644
> > +++ b/drivers/iommu/intel/iommu.c
> > @@ -1743,7 +1743,14 @@ static void domain_flush_piotlb(struct
> > intel_iommu *iommu, if (domain->default_pasid)
> > qi_flush_piotlb(iommu, did, domain->default_pasid,
> > addr, npages, ih);
> > -
> > + if (domain->kernel_pasid && !domain_type_is_si(domain)) {
> > + /*
> > + * REVISIT: we only do PASID IOTLB inval for FL, we
> > could have SL
> > + * for PASID in the future such as vIOMMU PT. this
> > doesn't get hit.
> > + */
> > + qi_flush_piotlb(iommu, did, domain->kernel_pasid,
> > + addr, npages, ih);
> > + }
> > if (!list_empty(&domain->devices))
> > qi_flush_piotlb(iommu, did, PASID_RID2PASID, addr,
> > npages, ih); }
> > @@ -5695,6 +5702,100 @@ static void intel_iommu_iotlb_sync_map(struct
> > iommu_domain *domain, }
> > }
> >
> > +static int intel_enable_pasid_dma(struct device *dev, u32 pasid)
> > +{
>
> This seems like completely the wrong kind of op.
>
> At the level of the iommu driver things should be iommu_domain centric
>
> The op should be
>
> int attach_dev_pasid(struct iommu_domain *domain, struct device *dev,
> ioasid_t pasid)
>
> Where 'dev' purpose is to provide the RID
>
> The iommu_domain passed in should be the 'default domain' ie the table
> used for on-demand mapping, or the passthrough page table.
>
Makes sense. DMA API is device centric, iommu API is domain centric. It
should be the common IOMMU code to get the default domain then pass to
vendor drivers. Then we can enforce default domain behavior across all
vendor drivers.
i.e.
dom = iommu_get_dma_domain(dev);
attach_dev_pasid(dom, dev, pasid);

> > + struct intel_iommu *iommu = device_to_iommu(dev, NULL, NULL);
> > + struct device_domain_info *info;
>
> I don't even want to know why an iommu driver is tracking its own
> per-device state. That seems like completely wrong layering.
>
This is for IOTLB and deTLB flush. IOTLB is flushed at per domain level,
devTLB is per device.

For multi-device groups, this is a need to track how many devices are using
the kernel DMA PASID.

Are you suggesting we add the tracking info in the generic layer? i.e.
iommu_group.

We could also have a generic device domain info to replace what is in VT-d
and FSL IOMMU driver, etc.

Thanks,

Jacob

\
 
 \ /
  Last update: 2021-12-08 20:14    [W:0.063 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site