lkml.org 
[lkml]   [2021]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dt-bindings: input: pwm-vibrator: Convert txt bindings to yaml
Date
Converts txt binding to new YAML format and simplify example.

Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
v2:
- added Sebastian review
- replace anyOf with minItems

.../bindings/input/pwm-vibrator.txt | 66 -------------------
.../bindings/input/pwm-vibrator.yaml | 57 ++++++++++++++++
2 files changed, 57 insertions(+), 66 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/pwm-vibrator.txt
create mode 100644 Documentation/devicetree/bindings/input/pwm-vibrator.yaml

diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
deleted file mode 100644
index 88c775a3fe21..000000000000
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* PWM vibrator device tree bindings
-
-Registers a PWM device as vibrator. It is expected, that the vibrator's
-strength increases based on the duty cycle of the enable PWM channel
-(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
-
-The binding supports an optional direction PWM channel, that can be
-driven at fixed duty cycle. If available this is can be used to increase
-the vibration effect of some devices.
-
-Required properties:
-- compatible: should contain "pwm-vibrator"
-- pwm-names: Should contain "enable" and optionally "direction"
-- pwms: Should contain a PWM handle for each entry in pwm-names
-
-Optional properties:
-- vcc-supply: Phandle for the regulator supplying power
-- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
- nanoseconds, defaults to 50% of the channel's
- period.
-
-Example from Motorola Droid 4:
-
-&omap4_pmx_core {
- vibrator_direction_pin: pinmux_vibrator_direction_pin {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
- >;
- };
-
- vibrator_enable_pin: pinmux_vibrator_enable_pin {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
- >;
- };
-};
-
-/ {
- pwm8: dmtimer-pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_direction_pin>;
-
- compatible = "ti,omap-dmtimer-pwm";
- #pwm-cells = <3>;
- ti,timers = <&timer8>;
- ti,clock-source = <0x01>;
- };
-
- pwm9: dmtimer-pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_enable_pin>;
-
- compatible = "ti,omap-dmtimer-pwm";
- #pwm-cells = <3>;
- ti,timers = <&timer9>;
- ti,clock-source = <0x01>;
- };
-
- vibrator {
- compatible = "pwm-vibrator";
- pwms = <&pwm9 0 1000000000 0>,
- <&pwm8 0 1000000000 0>;
- pwm-names = "enable", "direction";
- direction-duty-cycle-ns = <1000000000>;
- };
-};
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
new file mode 100644
index 000000000000..a70a636ee112
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/pwm-vibrator.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: PWM vibrator
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: >
+ Registers a PWM device as vibrator. It is expected, that the vibrator's
+ strength increases based on the duty cycle of the enable PWM channel
+ (100% duty cycle meaning strongest vibration, 0% meaning no vibration).
+
+ The binding supports an optional direction PWM channel, that can be
+ driven at fixed duty cycle. If available this is can be used to increase
+ the vibration effect of some devices.
+
+properties:
+ compatible:
+ const: pwm-vibrator
+
+ pwm-names:
+ items:
+ - const: enable
+ - const: direction
+ minItems: 1
+
+ pwms:
+ minItems: 1
+ maxItems: 2
+
+ vcc-supply: true
+
+ direction-duty-cycle-ns:
+ description: >
+ Duty cycle of the direction PWM channel in nanoseconds,
+ defaults to 50% of the channel's period.
+
+required:
+ - compatible
+ - pwm-names
+ - pwms
+
+additionalProperties: false
+
+examples:
+ - |
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm9 0 1000000000 0>,
+ <&pwm8 0 1000000000 0>;
+ pwm-names = "enable", "direction";
+ direction-duty-cycle-ns = <1000000000>;
+ };
--
2.33.0
\
 
 \ /
  Last update: 2021-12-08 19:35    [W:0.048 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site