lkml.org 
[lkml]   [2021]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: dts: at91: sama5d2_xplained: remove PA11__SDMMC0_VDDSEL from pinctrl
From
Date
On 26/10/2021 at 15:20, Eugen Hristev wrote:
> From: Mihai Sain <mihai.sain@microchip.com>
>
> I/O voltage for eMMC is always 3.3V because PA11__SDMMC0_VDDSEL is
> tied with 10K resistor to GND. U13 switch S1 is always selected as
> voltage rail of 3.3V for VCCQ power pin from MPU controller and eMMC flash.
> Removing PA11 from pinctrl because it remains unused.
>
> Signed-off-by: Mihai Sain <mihai.sain@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Thanks, best regards,
Nicolas

> ---
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index b1e854f658de..9bf2ec0ba3e2 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -66,7 +66,7 @@ sdmmc0: sdio-host@a0000000 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_sdmmc0_default>;
> non-removable;
> - mmc-ddr-1_8v;
> + mmc-ddr-3_3v;
> status = "okay";
> };
>
> @@ -619,10 +619,9 @@ cmd_data {
> bias-disable;
> };
>
> - ck_cd_rstn_vddsel {
> + ck_cd_rstn {
> pinmux = <PIN_PA0__SDMMC0_CK>,
> <PIN_PA10__SDMMC0_RSTN>,
> - <PIN_PA11__SDMMC0_VDDSEL>,
> <PIN_PA13__SDMMC0_CD>;
> bias-disable;
> };
>


--
Nicolas Ferre

\
 
 \ /
  Last update: 2021-12-08 12:22    [W:0.055 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site