Messages in this thread | | | From | Kalle Valo <> | Subject | Re: [PATCH] ath10k: support bus and device specific API 1 BDF selection | Date | Tue, 07 Dec 2021 20:09:32 +0200 |
| |
Kalle Valo <kvalo@kernel.org> writes:
> Robert Marko <robimarko@gmail.com> wrote: > >> Some ath10k IPQ40xx devices like the MikroTik hAP ac2 and ac3 require the >> BDF-s to be extracted from the device storage instead of shipping packaged >> API 2 BDF-s. >> >> This is required as MikroTik has started shipping boards that require BDF-s >> to be updated, as otherwise their WLAN performance really suffers. >> This is however impossible as the devices that require this are release >> under the same revision and its not possible to differentiate them from >> devices using the older BDF-s. >> >> In OpenWrt we are extracting the calibration data during runtime and we are >> able to extract the BDF-s in the same manner, however we cannot package the >> BDF-s to API 2 format on the fly and can only use API 1 to provide BDF-s on >> the fly. >> This is an issue as the ath10k driver explicitly looks only for the >> board.bin file and not for something like board-bus-device.bin like it does >> for pre-cal data. >> Due to this we have no way of providing correct BDF-s on the fly, so lets >> extend the ath10k driver to first look for BDF-s in the >> board-bus-device.bin format, for example: board-ahb-a800000.wifi.bin >> If that fails, look for the default board file name as defined previously. >> >> Signed-off-by: Robert Marko <robimarko@gmail.com> > > Can someone review this, please? I understand the need for this, but the board > handling is getting quite complex in ath10k so I'm hesitant. > > What about QCA6390 and other devices. Will they still work?
I meant QCA6174, of course. I have been working too much on ath11k.
-- https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
| |