lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] MIPS: Do not define pci_remap_iospace() under MACH_LOONGSON64
On Wed, Nov 17, 2021 at 05:03:15PM +0800, Tiezhu Yang wrote:
> After commit 9f76779f2418 ("MIPS: implement architecture-specific
> 'pci_remap_iospace()'"), there exists the following warning on the
> Loongson64 platform:
>
> loongson-pci 1a000000.pci: IO 0x0018020000..0x001803ffff -> 0x0000020000
> loongson-pci 1a000000.pci: MEM 0x0040000000..0x007fffffff -> 0x0040000000
> ------------[ cut here ]------------
> WARNING: CPU: 2 PID: 1 at arch/mips/pci/pci-generic.c:55 pci_remap_iospace+0x84/0x90
> resource start address is not zero
> ...
> Call Trace:
> [<ffffffff8020dc78>] show_stack+0x40/0x120
> [<ffffffff80cf4a0c>] dump_stack_lvl+0x58/0x74
> [<ffffffff8023a0b0>] __warn+0xe0/0x110
> [<ffffffff80cee02c>] warn_slowpath_fmt+0xa4/0xd0
> [<ffffffff80cecf24>] pci_remap_iospace+0x84/0x90
> [<ffffffff807f9864>] devm_pci_remap_iospace+0x5c/0xb8
> [<ffffffff808121b0>] devm_of_pci_bridge_init+0x178/0x1f8
> [<ffffffff807f4000>] devm_pci_alloc_host_bridge+0x78/0x98
> [<ffffffff80819454>] loongson_pci_probe+0x34/0x160
> [<ffffffff809203cc>] platform_probe+0x6c/0xe0
> [<ffffffff8091d5d4>] really_probe+0xbc/0x340
> [<ffffffff8091d8f0>] __driver_probe_device+0x98/0x110
> [<ffffffff8091d9b8>] driver_probe_device+0x50/0x118
> [<ffffffff8091dea0>] __driver_attach+0x80/0x118
> [<ffffffff8091b280>] bus_for_each_dev+0x80/0xc8
> [<ffffffff8091c6d8>] bus_add_driver+0x130/0x210
> [<ffffffff8091ead4>] driver_register+0x8c/0x150
> [<ffffffff80200a8c>] do_one_initcall+0x54/0x288
> [<ffffffff811a5320>] kernel_init_freeable+0x27c/0x2e4
> [<ffffffff80cfc380>] kernel_init+0x2c/0x134
> [<ffffffff80205a2c>] ret_from_kernel_thread+0x14/0x1c
> ---[ end trace e4a0efe10aa5cce6 ]---
> loongson-pci 1a000000.pci: error -19: failed to map resource [io 0x20000-0x3ffff]
>
> We can see that the resource start address is 0x0000020000, because
> the ISA Bridge used the zero address which is defined in the dts file
> arch/mips/boot/dts/loongson/ls7a-pch.dtsi:
>
> ISA Bridge: /bus@10000000/isa@18000000
> IO 0x0000000018000000..0x000000001801ffff -> 0x0000000000000000
>
> The architecture-independent function pci_remap_iospace() works well
> for Loongson64, so just do not define architecture-specific function
> pci_remap_iospace() under MACH_LOONGSON64.
>
> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
> ---
> arch/mips/include/asm/pci.h | 2 ++
> arch/mips/pci/pci-generic.c | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
> index 421231f..5d647cb 100644
> --- a/arch/mips/include/asm/pci.h
> +++ b/arch/mips/include/asm/pci.h
> @@ -21,8 +21,10 @@
> #include <linux/of.h>
>
> #ifdef CONFIG_PCI_DRIVERS_GENERIC
> +#ifndef CONFIG_MACH_LOONGSON64
> #define pci_remap_iospace pci_remap_iospace
> #endif
> +#endif

I prefer a version without new CONFIG_MACH_LOONGSON64 ifdefery. Something
like:


diff --git a/arch/mips/include/asm/mach-ralink/spaces.h b/arch/mips/include/asm/mach-ralink/spaces.h
index 05d14c21c417..f7af11ea2d61 100644
--- a/arch/mips/include/asm/mach-ralink/spaces.h
+++ b/arch/mips/include/asm/mach-ralink/spaces.h
@@ -6,5 +6,7 @@
#define PCI_IOSIZE SZ_64K
#define IO_SPACE_LIMIT (PCI_IOSIZE - 1)

+#define pci_remap_iospace pci_remap_iospace
+
#include <asm/mach-generic/spaces.h>
#endif
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 421231f55935..9ffc8192adae 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -20,10 +20,6 @@
#include <linux/list.h>
#include <linux/of.h>

-#ifdef CONFIG_PCI_DRIVERS_GENERIC
-#define pci_remap_iospace pci_remap_iospace
-#endif
-
#ifdef CONFIG_PCI_DRIVERS_LEGACY

/*
diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
index 18eb8a453a86..d2d68bac3d25 100644
--- a/arch/mips/pci/pci-generic.c
+++ b/arch/mips/pci/pci-generic.c
@@ -47,6 +47,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
pci_read_bridge_bases(bus);
}

+#ifdef pci_remap_iospace
int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
{
unsigned long vaddr;
@@ -60,3 +61,4 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
set_io_port_base(vaddr);
return 0;
}
+#endif
Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]

\
 
 \ /
  Last update: 2021-12-07 18:06    [W:0.343 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site