lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 net-next 1/4] net: dsa: ocelot: remove unnecessary pci_bar variables
Date
The pci_bar variables for the switch and imdio don't make sense for the
generic felix driver. Moving them to felix_vsc9959 to limit scope and
simplify the felix_info struct.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/ocelot/felix.h | 2 --
drivers/net/dsa/ocelot/felix_vsc9959.c | 10 ++++------
2 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h
index dfe08dddd262..183dbf832db9 100644
--- a/drivers/net/dsa/ocelot/felix.h
+++ b/drivers/net/dsa/ocelot/felix.h
@@ -25,8 +25,6 @@ struct felix_info {
u16 vcap_pol_max;
u16 vcap_pol_base2;
u16 vcap_pol_max2;
- int switch_pci_bar;
- int imdio_pci_bar;
const struct ptp_clock_info *ptp_caps;

/* Some Ocelot switches are integrated into the SoC without the
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 9add86eda7e3..0676e204c804 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -21,6 +21,8 @@
#define VSC9959_TAS_GCL_ENTRY_MAX 63
#define VSC9959_VCAP_POLICER_BASE 63
#define VSC9959_VCAP_POLICER_MAX 383
+#define VSC9959_SWITCH_PCI_BAR 4
+#define VSC9959_IMDIO_PCI_BAR 0

static const u32 vsc9959_ana_regmap[] = {
REG(ANA_ADVLEARN, 0x0089a0),
@@ -2230,8 +2232,6 @@ static const struct felix_info felix_info_vsc9959 = {
.num_mact_rows = 2048,
.num_ports = 6,
.num_tx_queues = OCELOT_NUM_TC,
- .switch_pci_bar = 4,
- .imdio_pci_bar = 0,
.quirk_no_xtr_irq = true,
.ptp_caps = &vsc9959_ptp_caps,
.mdio_bus_alloc = vsc9959_mdio_bus_alloc,
@@ -2290,10 +2290,8 @@ static int felix_pci_probe(struct pci_dev *pdev,
ocelot->dev = &pdev->dev;
ocelot->num_flooding_pgids = OCELOT_NUM_TC;
felix->info = &felix_info_vsc9959;
- felix->switch_base = pci_resource_start(pdev,
- felix->info->switch_pci_bar);
- felix->imdio_base = pci_resource_start(pdev,
- felix->info->imdio_pci_bar);
+ felix->switch_base = pci_resource_start(pdev, VSC9959_SWITCH_PCI_BAR);
+ felix->imdio_base = pci_resource_start(pdev, VSC9959_IMDIO_PCI_BAR);

pci_set_master(pdev);

--
2.25.1
\
 
 \ /
  Last update: 2021-12-07 18:01    [W:0.072 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site