lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[net-next RFC PATCH 4/6] net: dsa: qca8k: Add support for mdio read/write in Ethernet packet
Date
Add qca8k side support for mdio read/write in Ethernet packet.
qca8k supports some specially crafted Ethernet packet that can be used
for mdio read/write instead of the legacy method uart/internal mdio.
This add support for the qca8k side to craft the packet and enqueue it.
Each port and the qca8k_priv have a special struct to put data in it.
The completion API is used to wait for the packet to be received back
with the requested data.

The various steps are:
1. Craft the special packet with the qca hdr set to mdio read/write
mode.
2. Set the lock in the dedicated mdio struct.
3. Reinit the completion.
4. Enqueue the packet.
5. Wait the packet to be received.
6. Use the data set by the tagger to complete the mdio operation.

If the completion timeouts or the ack value is not true, the legacy
mdio way is used.

It has to be considered that in the initial setup mdio is still used and
mdio is still used until DSA is ready to accept and tag packet.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/net/dsa/qca8k.c | 156 +++++++++++++++++++++++++++++++++++-
drivers/net/dsa/qca8k.h | 5 ++
include/linux/dsa/tag_qca.h | 13 +++
3 files changed, 172 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 96a7fbf8700c..d2c6139be9ac 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -20,6 +20,7 @@
#include <linux/phylink.h>
#include <linux/gpio/consumer.h>
#include <linux/etherdevice.h>
+#include <linux/dsa/tag_qca.h>

#include "qca8k.h"

@@ -170,6 +171,128 @@ qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
return regmap_update_bits(priv->regmap, reg, mask, write_val);
}

+static struct sk_buff *qca8k_alloc_mdio_header(struct qca8k_port_tag *header, enum mdio_cmd cmd,
+ u32 reg, u32 *val)
+{
+ struct mdio_ethhdr *mdio_ethhdr;
+ struct sk_buff *skb;
+ u16 hdr;
+
+ skb = dev_alloc_skb(QCA_HDR_MDIO_PKG_LEN);
+
+ prefetchw(skb->data);
+
+ skb_reset_mac_header(skb);
+ skb_set_network_header(skb, skb->len);
+
+ mdio_ethhdr = skb_push(skb, QCA_HDR_MDIO_HEADER_LEN + QCA_HDR_LEN);
+
+ hdr = FIELD_PREP(QCA_HDR_XMIT_VERSION, QCA_HDR_VERSION);
+ hdr |= QCA_HDR_XMIT_FROM_CPU;
+ hdr |= FIELD_PREP(QCA_HDR_XMIT_DP_BIT, BIT(0));
+ hdr |= FIELD_PREP(QCA_HDR_XMIT_CONTROL, QCA_HDR_XMIT_TYPE_RW_REG);
+
+ mdio_ethhdr->seq = FIELD_PREP(QCA_HDR_MDIO_SEQ_NUM, 200);
+
+ mdio_ethhdr->command = FIELD_PREP(QCA_HDR_MDIO_ADDR, reg);
+ mdio_ethhdr->command |= FIELD_PREP(QCA_HDR_MDIO_LENGTH, 4);
+ mdio_ethhdr->command |= FIELD_PREP(QCA_HDR_MDIO_CMD, cmd);
+ mdio_ethhdr->command |= FIELD_PREP(QCA_HDR_MDIO_CHECK_CODE, MDIO_CHECK_CODE_VAL);
+
+ if (cmd == MDIO_WRITE)
+ mdio_ethhdr->mdio_data = *val;
+
+ mdio_ethhdr->hdr = htons(hdr);
+
+ skb_put_zero(skb, QCA_HDR_MDIO_DATA2_LEN);
+ skb_put_zero(skb, QCA_HDR_MDIO_PADDING_LEN);
+
+ return skb;
+}
+
+static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val)
+{
+ struct qca8k_port_tag *header = priv->header_mdio;
+ struct sk_buff *skb;
+ bool ack;
+ int ret;
+
+ skb = qca8k_alloc_mdio_header(header, MDIO_READ, reg, 0);
+ skb->dev = dsa_to_port(priv->ds, 0)->master;
+
+ mutex_lock(&header->mdio_mutex);
+
+ reinit_completion(&header->rw_done);
+ header->seq = 200;
+ header->ack = false;
+
+ dev_queue_xmit(skb);
+
+ ret = wait_for_completion_timeout(&header->rw_done, QCA8K_MDIO_RW_ETHERNET);
+
+ *val = header->data[0];
+ ack = header->ack;
+
+ mutex_unlock(&header->mdio_mutex);
+
+ if (ret <= 0)
+ return -ETIMEDOUT;
+
+ if (!ack)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ struct qca8k_port_tag *header = priv->header_mdio;
+ struct sk_buff *skb;
+ bool ack;
+ int ret;
+
+ skb = qca8k_alloc_mdio_header(header, MDIO_WRITE, reg, &val);
+ skb->dev = dsa_to_port(priv->ds, 0)->master;
+
+ mutex_lock(&header->mdio_mutex);
+
+ dev_queue_xmit(skb);
+
+ reinit_completion(&header->rw_done);
+ header->ack = false;
+ header->seq = 200;
+
+ ret = wait_for_completion_timeout(&header->rw_done, QCA8K_MDIO_RW_ETHERNET);
+
+ ack = header->ack;
+
+ mutex_unlock(&header->mdio_mutex);
+
+ if (ret <= 0)
+ return -ETIMEDOUT;
+
+ if (!ack)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int
+qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
+{
+ u32 val = 0;
+ int ret;
+
+ ret = qca8k_read_eth(priv, reg, &val);
+ if (ret)
+ return ret;
+
+ val &= ~mask;
+ val |= write_val;
+
+ return qca8k_write_eth(priv, reg, val);
+}
+
static int
qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
{
@@ -178,6 +301,10 @@ qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
u16 r1, r2, page;
int ret;

+ if (priv->atheros_header_ready)
+ if (!qca8k_read_eth(priv, reg, val))
+ return 0;
+
qca8k_split_addr(reg, &r1, &r2, &page);

mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
@@ -201,6 +328,10 @@ qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
u16 r1, r2, page;
int ret;

+ if (priv->atheros_header_ready)
+ if (!qca8k_write_eth(priv, reg, val))
+ return 0;
+
qca8k_split_addr(reg, &r1, &r2, &page);

mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
@@ -225,6 +356,10 @@ qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_
u32 val;
int ret;

+ if (priv->atheros_header_ready)
+ if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val))
+ return 0;
+
qca8k_split_addr(reg, &r1, &r2, &page);

mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
@@ -1223,8 +1358,13 @@ qca8k_setup(struct dsa_switch *ds)
* Configure specific switch configuration for ports
*/
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ struct dsa_port *dp = dsa_to_port(ds, i);
+
+ /* Set the header_mdio to be accessible by the qca tagger */
+ dp->priv = priv->header_mdio;
+
/* CPU port gets connected to all user ports of the switch */
- if (dsa_is_cpu_port(ds, i)) {
+ if (dsa_port_is_cpu(dp)) {
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
if (ret)
@@ -1232,7 +1372,7 @@ qca8k_setup(struct dsa_switch *ds)
}

/* Individual user ports get connected to CPU port only */
- if (dsa_is_user_port(ds, i)) {
+ if (dsa_port_is_user(dp)) {
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER,
BIT(cpu_port));
@@ -1684,6 +1824,9 @@ qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;

qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg);
+
+ if (dsa_is_cpu_port(ds, port))
+ priv->atheros_header_ready = true;
}

static void
@@ -2452,6 +2595,7 @@ static int qca8k_read_switch_id(struct qca8k_priv *priv)
static int
qca8k_sw_probe(struct mdio_device *mdiodev)
{
+ struct qca8k_port_tag *header_mdio;
struct qca8k_priv *priv;
int ret;

@@ -2462,6 +2606,13 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
if (!priv)
return -ENOMEM;

+ header_mdio = devm_kzalloc(&mdiodev->dev, sizeof(*header_mdio), GFP_KERNEL);
+ if (!header_mdio)
+ return -ENOMEM;
+
+ mutex_init(&header_mdio->mdio_mutex);
+ init_completion(&header_mdio->rw_done);
+
priv->bus = mdiodev->bus;
priv->dev = &mdiodev->dev;

@@ -2501,6 +2652,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
priv->ds->priv = priv;
priv->ops = qca8k_switch_ops;
priv->ds->ops = &priv->ops;
+ priv->header_mdio = header_mdio;
mutex_init(&priv->reg_mutex);
dev_set_drvdata(&mdiodev->dev, priv);

diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index ab4a417b25a9..149bc4280856 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -11,6 +11,9 @@
#include <linux/delay.h>
#include <linux/regmap.h>
#include <linux/gpio.h>
+#include <linux/dsa/tag_qca.h>
+
+#define QCA8K_MDIO_RW_ETHERNET 100

#define QCA8K_NUM_PORTS 7
#define QCA8K_NUM_CPU_PORTS 2
@@ -342,6 +345,7 @@ struct qca8k_priv {
u8 mirror_rx;
u8 mirror_tx;
u8 lag_hash_mode;
+ bool atheros_header_ready;
bool legacy_phy_port_mapping;
struct qca8k_ports_config ports_config;
struct regmap *regmap;
@@ -353,6 +357,7 @@ struct qca8k_priv {
struct dsa_switch_ops ops;
struct gpio_desc *reset_gpio;
unsigned int port_mtu[QCA8K_NUM_PORTS];
+ struct qca8k_port_tag *header_mdio;
};

struct qca8k_mib_desc {
diff --git a/include/linux/dsa/tag_qca.h b/include/linux/dsa/tag_qca.h
index 578a4aeafd92..a45a973865c3 100644
--- a/include/linux/dsa/tag_qca.h
+++ b/include/linux/dsa/tag_qca.h
@@ -59,4 +59,17 @@ struct mdio_ethhdr {
u16 hdr; /* qca hdr */
} __packed;

+enum mdio_cmd {
+ MDIO_WRITE = 0x0,
+ MDIO_READ
+};
+
+struct qca8k_port_tag {
+ struct completion rw_done;
+ struct mutex mdio_mutex; /* Enforce one mdio read/write at time */
+ bool ack;
+ u32 seq;
+ u32 data[4];
+};
+
#endif /* __TAG_QCA_H */
--
2.32.0
\
 
 \ /
  Last update: 2021-12-07 16:00    [W:0.101 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site