lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 03/15] arm64: dts: qcom: sm8450: Add tlmm nodes
On Tue 30 Nov 23:29 PST 2021, Vinod Koul wrote:

> Add tlmm node found in SM8450 SoC and uart pin configuration
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> arch/arm64/boot/dts/qcom/sm8450.dtsi | 29 ++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index d838283bde4b..f0b9e80238a2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -343,6 +343,8 @@ uart7: serial@99c000 {
> reg = <0 0x0099c000 0 0x4000>;
> clock-names = "se";
> clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_uart7_default_state>;
> interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -366,6 +368,33 @@ pdc: interrupt-controller@b220000 {
> interrupt-controller;
> };
>
> + tlmm: pinctrl@f100000 {
> + compatible = "qcom,sm8450-tlmm";
> + reg = <0 0x0f100000 0 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 211>;
> + wakeup-parent = <&pdc>;
> +
> + qup_uart7_default_state: qup-uart3-default-state {

There's a '3' in the node name.

Loos good otherwise.

Thanks,
Bjorn

> + rx {
> + pins = "gpio26";
> + function = "qup7";
> + drive-strength = <2>;
> + bias-disable;
> + };
> + tx {
> + pins = "gpio27";
> + function = "qup7";
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> + };
> +
> intc: interrupt-controller@17100000 {
> compatible = "arm,gic-v3";
> #interrupt-cells = <3>;
> --
> 2.31.1
>

\
 
 \ /
  Last update: 2021-12-07 15:36    [W:1.588 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site